Vizio S4251WB4 - Manuals

5 CONTROLS & CONNECTIONS Power Port Back of Sound Bar (USB 5) USB Port (Optical 4) Digital Optical Audio In (Digital 3) Coaxial In (Aux 2) Analog Audio In (Aux 1) Analog Audio In

6 Control Buttons are located here: Back of Sound Bar Input Power Volume + - Bluetooth Input (Hold to force pair, See “Bluetooth Pairing” on page 20)

8 FIRST-TIME SETUP *Not all TVs have the audio outputs shown above. To connect the Sound Bar directly to your other devices (Blu-ray player, game system, etc) see your device’s user manual. Connect one of the included cables to ONE TV audio output as shown.* 1 Connection ports are located here: AND ...

10 BACK OF SUBWOOFER 4 5 6 Connect a Power Cable to the Subwoofer. Plug the Power Cable into a power outlet. Flip the Power Switch into the On position.

13 9 Remove the battery cover by gently sliding it away from the remote. 10 Insert the included batteries and gently slide the battery cover back into place. 11 Turn your TV on, then press the Power button on the remote to turn the Sound Bar on. Press the Input button to switch between audio sources...

14 Volume + Press to increase volume. INPUT MENU V I Z I O Volume - Press to decrease volume. USING THE REMOTE Previous Press to return to previous track. (Changes audio settings in Menu) Power Press to turn on or off. Mute Press to mute/unmute. Input Press to change input source. Enter/Play/Pause P...

15 LED Indicators are located here: ADJUSTING SOUND BAR SETTINGS Press the Menu button and use the Up/Down Arrow buttons on the remote to access the different functions and acoustic settings of the Sound Bar. Each function and setting will be displayed on the remote control’s LCD display. The LED In...

17 PROGRAM REMOTE You can program your Sound Bar to accept TV remote IR commands. Press the Menu button on the remote, then use the Up/Down buttons to navigate to Prg Remote . Use the Next/Previous buttons to toggle through Learn Vol - , Learn Vol + , and Learn Mute . Function LED Behavior Descripti...

18 Function LED Behavior Description Reset All Indicator LEDs will flash three times confirming factory reset. To reset the Sound Bar to factory default settings:1. Press the Menu button on the remote control. 2. Use the Up/Down buttons to navigate to Reset No . 3. Press the Next button to navigate ...

19 RE-LINKING THE SUBWOOFER WITH SOUND BAR Your Subwoofer has already been paired with your Sound Bar by VIZIO. However, you may need to pair the Subwoofer to the Sound Bar if there is no sound coming from the Subwoofer. 1 First confirm that the power switch is in the ON position. Press and hold the...

20 BLUETOOTH PAIRING To pair the Sound Bar with a Bluetooth device: 1. Press and hold the Bluetooth button on the Sound Bar for five (5) seconds or use the BT Pair menu option from the remote (see “ Adjusting Sound Bar Settings” on page 15). When the Sound Bar is in Bluetooth Pairing Mode, the LED I...

21 USING BLUETOOTH MODE Your Sound Bar supports music streaming from smartphones, tablets, and computers with Bluetooth capability. Device compatibility will vary, see your device’s documentation for more information. Once you have paired your source device to the Sound Bar, as long as you stay with...

22 ADVANCED SETUP Connection ports are located here: DIGITAL OPTICAL CABLE Connect up to five (5) different devices to the Sound Bar (devices shown are examples-you can use any device). To listen to a device, change the input source on the Sound Bar. Optical, Coaxial, and 3.5mm cables transmit audio...

23 INSTALLING THE CABLE MANAGEMENT TIE The Cable Management Tie can be used to organize the input and power cables behind the sound bar. 1. Place the Sound Bar face down on a non-marring or soft flat level surface. 2. Insert the Tie into the hole on the center of the Sound Bar. 3. Insert the Pin int...

24 WALL MOUNTING THE SOUND BAR Back of Sound Bar Wall-Mount Screw Holes Insert and tighten two Wall-Mount Screws with a Phillips-head screwdriver into the Wall-Mount Screw Holes. 1 2 Place the included wall mounting template against the wall under your TV. Mark the four bracket holes using a pencil.

25 Be sure your screws are attached to wood studs or drywall anchors (for drywall) or concrete anchors (for brick/concrete walls). Wall mounting hardware is not included. If you are unfamiliar with power tools or the layout of electrical wiring in the walls of your home, consult a professional insta...

26 WALL MOUNTING THE SATELLITE SPEAKERS If you are unfamiliar with power tools or the layout of electrical wiring in the walls of your home, consult a professional installer. Be sure your screws are attached to wood studs or drywall anchors (for drywall) or concrete anchors (for brick/concrete walls...

27 There is no power. • Press the POWER button on the remote control or on the top of your Sound Bar. • Ensure the power cord is securely connected.• Plug a different device into the electrical outlet to verify that the outlet is working correctly. There is no sound. • Increase the volume. Press Vol...

DO YOU HAVE QUESTIONS? LET US HELP! YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT Phone: Email: Web: (877) 878-4946 (TOLL-FREE) techsupport@ VIZIO .com http://store.VIZIO.com/support Hours of operation: Monday - Friday: 5 am TO 9 pm (pST) Saturday - Sunday: 8 am TO 4 pm (pST) The VIZIO support te...

Available at www.VIZIO.com This Product Sold Separately The VIZIO Co-Star™ Stream Player merges live TV and streaming entertainment into one experience, turning any HDTV into the ultimate smart TV. Using the latest version of Google TV™, Co-Star decks out your existing HDTV with apps, full-screen We...

30 ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90) days of commercial use. If a Pr...