Page 3 - DLP Projector—User’s Manual; ii; Important Safety Information; Symbols Used; button on the remote control to open the; Main; the unit. For servicing, contact qualified service personnel.
DLP Projector—User’s Manual — ii — Important Safety Information Important: It is strongly recommended that you read this section carefully before using the projector. These safety and usage instructions will ensure that you enjoy many years of safe use of the projector. Keep this manual for future r...
Page 4 - Preface; Projector Installation Notice; Place the projector in a horizontal position
Preface Projector Installation Notice ¾ Place the projector in a horizontal position The tilt angle of the projector should not exceed 15 degrees, nor should the projector be installed in any way other than the desktop and ceiling mount, otherwise lamp life could decrease dramatically, and may lead ...
Page 5 - iv; Verify Installation Location
DLP Projector—User’s Manual — iv — Verify Installation Location ¾ To supply power, the 3-blade (with earthing lead) socket should be used to ensure proper grounding and equalized ground potential for all of the equipment in the Projector System. ¾ The power code provided with the Projector should be...
Page 6 - Replacing the Projection Lamp; Hg; specific disposal information check
Preface Power Safety ¾ Only use the supplied power cord. ¾ Do not place anything on the power cord. Place the power cord where it will not be in the way of foot traffic. ¾ Remove the batteries from the remote control when storing or not in use for a prolonged period. Replacing the Lamp Replacing the...
Page 7 - vi; Main Features; Lightweight unit, easy to pack away and transport.; About this Manual
DLP Projector—User’s Manual — vi — Main Features • Lightweight unit, easy to pack away and transport. • Compatible with all major video standards including NTSC, PAL, and SECAM. • A high brightness rating allows for presentations in daylight or in lit rooms. • Supports resolutions up to UXGA at 16.7...
Page 8 - vii; Table of Contents; GETTING STARTED; OSD; MAINTENANCE AND SECURITY; LED
Preface – vii – Table of Contents GETTING STARTED ........................................................................................................................................................... 1 P ACKING C HECKLIST ...........................................................................
Page 9 - viii; SPECIFICATIONS; Projection Distance and Size Table; REGULATORY COMPLIANCE; FCC; APPENDIX I
DLP Projector—User’s Manual — viii — SPECIFICATIONS ............................................................................................................................................................. 45 S PECIFICATIONS ..........................................................................
Page 10 - ETTING; Packing Checklist; DLP; AA; Avoid using the projector in dusty environments.
DLP Projector—User’s Manual – 1 – G ETTING S TARTED Packing Checklist Carefully unpack the projector and check that the following items are included: DLP P ROJECTOR WITH L ENS C AP R EMOTE CONTROL ( WITH T WO AA B ATTERIES ) RGB CABLE P OWER CORD C ARRYING CASE ( O PTIONAL ) CD-ROM ( T HIS U SER ’ S...
Page 11 - Views of Projector Parts
DLP Projector—User’s Manual Views of Projector Parts Front-right View I TEM L ABEL D ESCRIPTION S EE PAGE 1. IR receiver Receive IR signal from remote control 2. Lens Projection Lens 3. Focus ring Focuses the projected image 4. Zoom ring Enlarges the projected image 16 5. Function keys See Top view—...
Page 13 - Rear view; Do not use this jack for anything other than intended use.
DLP Projector—User’s Manual Rear view 1 2 10 3 4 5 6 7 8 9 11 12 1 3 14 15 16 I TEM L ABEL D ESCRIPTION S EE PAGE 1. AC IN Connect the POWER cable 11 2. 3D SYNC Connect the 3D IR glasses transmitter (Note: For Vivitek brand 3D IR glasses only) 3. HDMI 1 Connect the HDMI cable from a HDMI device 4. H...
Page 15 - Bottom view; Ceiling support holes
DLP Projector—User’s Manual Bottom view I TEM L ABEL D ESCRIPTION S EE PAGE 1. Ceiling support holes Contact your dealer for information on mounting the projector on a ceiling 2. Tilt adjustor Rotate adjuster lever to adjust angle position. 15 Note: When installing, ensure that you use only UL Liste...
Page 16 - Remote Control Parts
DLP Projector—User’s Manual Remote Control Parts 1 23 4 5 678 9 10 11 12 13 14 1516 17 18 19 20 2 1 22 23 24 25 26 27 28 29 30 Important: 1. Avoid using the projector with bright fluorescent lighting turned on. Certain high-frequency fluorescent lights can disrupt remote control operation. 2. Be sur...
Page 18 - Remote Control Operating Range
DLP Projector—User’s Manual – 9 – Remote Control Operating Range The remote control uses infrared transmission to control the projector. It is not necessary to point the remote directly at the projector. Provided you are not holding the remote perpendicular to the sides or the rear of the projector,...
Page 19 - Inserting the Remote Control Batteries; Only use AA batteries (Alkaline batteries are recommended).
DLP Projector—User’s Manual Inserting the Remote Control Batteries 1. Remove the battery compartment cover by sliding the cover in the direction of the arrow. 2. Insert the battery with the positive side facing up. 3. Replace the cover. Caution: 1. Only use AA batteries (Alkaline batteries are recom...
Page 20 - ETUP AND; Starting and Shutting down the Projector; POWER; Setting an Access Password; SOURCE; Component Video: Traditional component video
DLP Projector—User’s Manual – 11 – S ETUP AND O PERATION Starting and Shutting down the Projector 1. Connect the power cord to the projector. Connect the other end to a wall outlet. The POWER LED on the projector light. 2. Turn on the connected devices. 3. Ensure the POWER LED not a flashing. Then p...
Page 21 - Power; again” message appears,; projector turns off.
DLP Projector—User’s Manual 5. When the “Power Off? /Press Power again” message appears, press the POWER button. The projector turns off. Caution: 1. Be sure to remove the lens cap before starting projector. 2. Do not unplug the power cord until the POWER LED stops flashing–indicating the projector ...
Page 22 - Setting an Access Password (Security Lock); Navigating the
DLP Projector—User’s Manual Setting an Access Password (Security Lock) You can use the four (arrow) buttons to set a password and prevent unauthorized use of the projector. When enabled, the password must be entered after you power on the projector. (See Navigating the OSD on page 17 and Setting the...
Page 23 - You can use the cursor buttons; MENU; button; Security Lock
DLP Projector—User’s Manual 5. You can use the cursor buttons ▲▼◄► either on keypad or IR remote control for password entry. You can use any combination including the same arrow five times, but not less than five. Press the cursor buttons in any order to set the password. Push the MENU button to exi...
Page 24 - Adjusting the Projector Level; Take note of the following when setting up the projector:
DLP Projector—User’s Manual Adjusting the Projector Level Take note of the following when setting up the projector: • The projector table or stand should be level and sturdy. • Position the projector so that it is perpendicular to the screen. • Ensure the cables are in a safe location. You could tri...
Page 25 - Adjusting the Zoom, Focus and Keystone; KEYSTONE; Adjusting the Volume; MUTE
DLP Projector—User’s Manual Adjusting the Zoom, Focus and Keystone 1. Use the Image-zoom control (on the projector only) to resize the projected image and screen size . 2. Use the Image-focus control (on the projector only) to sharpen the projected image . 3. Use the KEYSTONE buttons (on the project...
Page 26 - CREEN; OSD Menu Controls; Horizontal/Vertical Position
DLP Projector—User’s Manual – 17 – O N -S CREEN D ISPLAY (OSD) M ENU S ETTINGS OSD Menu Controls The projector has an OSD that lets you make image adjustments and change various settings. Navigating the OSD You can use the remote control cursor buttons to navigate and make changes to the OSD. 1 3 1 ...
Page 27 - Setting the OSD Language
DLP Projector—User’s Manual Setting the OSD Language Set the OSD language to your preference before continuing. 1. Press the MENU button. Press the cursor ◄► button to navigate to Settings 1 . Press the cursor ▲▼ button to move to the Advanced 1 menu. 2. Press (Enter) / ► to enter the Advanced 1 sub...
Page 28 - OSD Menu Overview
DLP Projector—User’s Manual OSD Menu Overview Use the following illustration to quickly find a setting or determine the range for a setting. Image Settings 1 Off, On Blank, Red, Green, Blue, White Std., Off, User Off, On 3D 3D Sync Invert 3D Format Hue Saturation English, Français, Deutsch, Español,...
Page 29 - Image Menu; Computer Menu
DLP Projector—User’s Manual Image Menu Attention ! All of display mode parameters when changed will be saved to user mode. Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Image Menu . Press the cursor ▲▼ button to move up and down in the Image menu. Press ◄► to ...
Page 31 - Advanced Feature
DLP Projector—User’s Manual Advanced Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ to move to the Advanced menu and then press Enter or ► . Press ▼▲ to move up and down in the Advanced menu. I TEM D ESCRIPTION Brilliant Color Press the cursor ◄► but...
Page 32 - Color Manager
DLP Projector—User’s Manual Color Manager Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ to move to the Color Manager menu and then press Enter or ► . Press ▼▲ to move up and down in the Color Manager menu. I TEM D ESCRIPTION Red Select to enter the Red Colo...
Page 33 - Settings 1 Menu; Audio
DLP Projector—User’s Manual Settings 1 Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Settings 1 menu. Press the cursor ▲▼ button to move up and down in the Settings 1 menu. Press ◄► to enter and change values for settings. I TEM D ESCRIPTION Source Press ...
Page 35 - Advanced 1 Feature; Setting
DLP Projector—User’s Manual Advanced 1 Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press ▲▼ to move to the Advanced 1 menu and then press Enter or ► . Press ▲▼ to move up and down in the Advanced 1 menu. Press ◄► to enter and change values for setting...
Page 36 - D Setting; You need 3D content from a 3D DVD or 3D media file.
DLP Projector—User’s Manual 3D Setting I TEM D ESCRIPTION 3D Press the cursor ◄► button to enter and select different 3D mode. 3D Sync Invert Press the cursor ◄► button to enter and enable or disable 3D Sync Invert. 3D Format Press the cursor ◄► button to enter and enable or disable different 3D For...
Page 37 - Advanced 2 Feature
DLP Projector—User’s Manual Advanced 2 Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press ▲▼ to move to the Advanced 2 menu and then press Enter or ► . Press ▲▼ to move up and down in the Advanced 2 menu. Press ◄► to enter and change values for setting...
Page 38 - Settings 2 Menu; Status
DLP Projector—User’s Manual Settings 2 Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Settings 2 menu. Press the cursor ▲▼ button to move up and down in the Settings 2 menu. I TEM D ESCRIPTION Auto Source Press the cursor ◄► button to enter and enable or d...
Page 39 - Press the cursor; menu; Enter; or; Active Source
DLP Projector—User’s Manual Status Press the cursor ▲▼ button to move up and down in the Settings 2 menu. Select the Status menu and press Enter or ► to enter. I TEM D ESCRIPTION Active Source Display the activated source. Video Information Displays resolution/video information for RGB source and co...
Page 40 - Note; Lamp Hour Reset
DLP Projector—User’s Manual Advanced 1 Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 2 menu. Press ▲▼ to move to the Advanced 1 menu and then press Enter or ► . Press ▲▼ to move up and down in the Advanced 1 menu. Press ◄► to enter and change values for setting...
Page 43 - ENTER; button to enter the; Source Filter
DLP Projector—User’s Manual Source Filter Press the ENTER button to enter the Source Filter sub menu. I TEM D ESCRIPTION VGA Press the cursor ◄► button to enter and enable or disable the VGA1 source. Component Video Press the cursor ◄► button to enter and enable or disable the Component Video source...
Page 44 - AINTENANCE AND; Do not dispose this product with general household waste.
DLP Projector—User’s Manual – 35 – M AINTENANCE AND S ECURITY Replacing the Projection Lamp The projection lamp should be replaced when it burns out. It should only be replaced with a certified replacement part, which you can order from your local dealer. Important: a. The projection lamp used in th...
Page 45 - Lift the module handle up.
DLP Projector—User’s Manual 2. Remove the lamp compartment cover. 3. Remove the three screws from the lamp module. 4. Lift the module handle up. 5. Pull firmly on the module handle to remove the lamp module. 6. Reverse steps 1 to 5 to install the new lamp module. While installing, align the lamp mod...
Page 46 - Resetting the Lamp
DLP Projector—User’s Manual Resetting the Lamp After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following: 1. Press the MENU button to open the OSD menu. 2. Press the cursor ◄► button to move to the Settings 2 menu. Press the cursor button to move down to Advanc...
Page 47 - Cleaning the Projector; could result in a severe burn.; Cleaning the Lens; Lightly wipe the lens in a circular motion.; Cleaning the Case; Refer to the following to clean the projector case.
DLP Projector—User’s Manual — 38 — Cleaning the Projector Cleaning the projector to remove dust and grime will help ensure trouble-free operation. Warning: 1. Be sure to turn off and unplug the projector at least 30 minutes before cleaning. Failure to do so could result in a severe burn. 2. Use only...
Page 48 - Using the Kensington
DLP Projector—User’s Manual Using the Kensington ® Lock & Using the Security Bar Using the Kensington ® Lock If you are concerned about security, attach the projector to a permanent object with the Kensington slot and a security cable. Note: Contact your vendor for details on purchasing a suitab...
Page 49 - ROUBLESHOOTING; Common problems and solutions; Ensure the projector is turned on.; Tips for Troubleshooting
DLP Projector—User’s Manual — 40 — T ROUBLESHOOTING Common problems and solutions These guidelines provide tips to deal with problems you may encounter while using the projector. If the problem remains unsolved, contact your dealer for assistance. Often after time spent troubleshooting, the problem ...
Page 50 - LED Error Messages; please; Image Problems; Problem: No image appears on the screen
DLP Projector—User’s Manual – 41 – LED Error Messages E RROR C ODE M ESSAGES P OWER L ED G REEN L AMP L ED R ED T EMP L ED R ED System Initial Flashing OFF OFF Ready to Power on (Standby) ON OFF OFF System Power on Flashing OFF OFF Lamp Lit , System stable ON OFF OFF Cooling Flashing OFF OFF Over Te...
Page 51 - Lamp Problems
DLP Projector—User’s Manual — 42 — 1. Position the projector so it is as perpendicular to the screen as possible. 2. Use the Keystone button on the remote control to correct the problem. Problem: The image is reversed Check the Projection setting on the Settings 1 menu of the OSD. Problem: The image...
Page 52 - Problem: The sound is distorted; Having the Projector Serviced
DLP Projector—User’s Manual – 43 – 3. Check the audio cable connection. 4. Test the source audio output with other speakers. 5. Have the projector serviced. Problem: The sound is distorted 1. Check the audio cable connection. 2. Test the source audio output with other speakers. 3. Have the projector...
Page 53 - Q. How do I run HDMI cables longer than 10 meters?
DLP Projector—User’s Manual — 44 — HDMI Q & A Q. What is the difference between a “Standard” HDMI cable and a “High-Speed” HDMI cable? Recently, HDMI Licensing, LLC announced that cables would be tested as Standard or High-Speed cables. ˙ Standard (or “category 1”) HDMI cables have been tested t...
Page 54 - PECIFICATIONS; Specifications
DLP Projector—User’s Manual – 45 – S PECIFICATIONS Specifications Model H1180HD H1185HD Display type TI DMD 0.65" 1080p Resolution 1080p 1920x1080 Projection distance 1.2 ~ 10 m Projection screen size 25.9" ~ 324.97" Projection lens Manual Focus/Manual Zoom Zoom ratio 1.5x Vertical keyst...
Page 55 - Projection Distance vs. Projection Size; MM
DLP Projector—User’s Manual Projection Distance vs. Projection Size Projection Distance and Size Table H1180HD / H1185HD I MAGE D IAGONAL （ INCH ） I MAGE W IDTH ( INCH ) I MAGE H IGHT ( INCH ) P ROJECTION D ISTANCE （ MM ） F ROM P ROJECTION D ISTANCE （ MM ） TO O FFSET -A ( MM ) 60 52.29 29.42 1846.3 ...
Page 56 - Timing Mode Table; KH; NTSC
DLP Projector—User’s Manual – 47 – Timing Mode Table S IGNAL R ESOLUTION H-S YNC ( KH Z ) V-S YNC ( H Z ) C OMPOSITE S_V IDEO C OMPONENT RGB (A NALOG ) HDMI (D IGITAL ) NTSC － 15.734 60 ○ － － － PAL/SECAM － 15.625 50 ○ － － － 640 x 400 37.9 85.08 － － ○ ○ 720 x 400 31.5 70.1 － － ○ ○ 720 x 400 37.9 85.0...
Page 57 - SDTV; Frequency supported
DLP Projector—User’s Manual — 48 — S IGNAL R ESOLUTION H-S YNC ( KH Z ) V-S YNC ( H Z ) C OMPOSITE S_V IDEO C OMPONENT RGB (A NALOG ) HDMI (D IGITAL ) 1280 x 1024 91.1 85 － － ○ ○ 1280 x 960 60 60 － － ○ ○ 1280 x 960 85.9 85 － － ○ ○ 1360 x 768 47.7 60 － － ○ ○ 1400 x 1050 65.3 60 － － ○ ○ 1440 x 900 55....
Page 58 - Projector Dimensions
DLP Projector—User’s Manual Projector Dimensions TE MP PO WE R LA MP – 49 –
Page 59 - EGULATORY; FCC Warning; This class B digital apparatus complies with Canadian ICES-003.; Safety Certifications
DLP Projector—User’s Manual — 50 — R EGULATORY C OMPLIANCE FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when th...
Page 60 - PPENDIX; Minimum delay for next command:; Header code; HEX; Operation Command
DLP Projector—User’s Manual – 51 – A PPENDIX I RS-232C Protocol RS232 Setting Baud rate: 9600 Parity check: None Data bit: 8 Stop bit: 1 Flow Control None Minimum delay for next command: 1ms Control Command Structure Header code Command code Data code End code HEX Command Data 0Dh ASCII ‘V’ Command ...
Page 62 - Command Group 03
DLP Projector—User’s Manual – 53 – Command Group 03 ASCII HEX Function Description Return Value VXXG0301 56h Xh Xh 47h 30h 33h 30h 31h 0Dh Get Scaling 0: Fill 1: 4:3 2: 16:9 3: Letter Box 4: Native 5: 2.35:1 Pn/F VXXS0301n 56h Xh Xh 53h 30h 33h 30h 31h nh 0Dh Set Scaling 0: Fill 1: 4:3 2: 16:9 3: Le...
Vivitek D732MX
Manual
Vivitek D86X
Manual
Vivitek D7
Manual
Vivitek D5185HD
Manual
Vivitek D825MS
Manual
Vivitek D326
Manual
Vivitek D856STPB
Manual
Vivitek IB8156-C
Manual
Vivitek 51" Micro Display Projection TV
Manual
Vivitek DVR5612
Manual
Vivitek D7180HD
Manual
Vivitek h5085
Manual
Vivitek D8300 Series
Manual
Vivitek D511
Manual
Vivitek D3355
Manual
Vivitek dx6851
Manual