Vivitar ViviCam 2750 - Manuals

PC System Requirements • A IBM compatible PC with minimum 486/66 Mhz processor, or higher. • Microsoft Windows 95, or Windows 98. Windows 3.X is not supported. • 8MB or more of RAM. (16 MB is preferred) • 30MB of hard disk space for Twain driver and image application • An available serial port for d...

Using the camera Power Supply The ViviCam 2750 camera uses standard AA Alkaline, NiCD, NiMH, or renewablealkaline batteries. You may also use an optional AC power supply that lets youuse household AC current. Installing Batteries 1. Invert the camera and place your thumb on the battery door.2. Slide...

Flash Memory The camera features 2 MB (Megabytes) of internal memory for storing images.This memory, called “Flash Memory”, in non-volatile. This means that the memorydoes not require electrical power to retain images. Therefore, you will notloose your images when the camera is turned off, if you ch...

Power Management - Auto Power Off Your camera is designed to automatically power-down (turn-off) after a specifictime interval after which no camera operations have been invoked. The factorysetting will typically be set in the range of 90 to 120 seconds. This is apower-saving feature. If you are usi...

Using the LCD Display Using the built-in image Liquid Crystal Display (LCD – feature 13), you can viewpictures immediately after capturing them. The following section describes howto use the LCD and its various functions. Note: You need not activate the LCD to capture images. Using the LCDcontinuall...

nine, and press Forward or Backward again you will go to the next “page” ofthumbnails.3. To return to single image review, press the Multiple Image Display button(button 3) again. Whichever image was currently highlighted (bracketed) inthumbnail mode will be the first image to appear in the LCD disp...

3. Press the Shutter button to change the Quality setting. The shutter button“toggles” back and forth between “High Quality” and “Normal Quality”. Using the Built-in Flash The ViviCam 2750 has three different flash modes: Auto (the default mode), On(Fill), and Off. Each of these modes can be accesse...

Take care that the camera is not dropped, or exposed to severe mechanical shockwhen it is being moved. This may cause the camera to malfunction. If you are using the optional AC power adapter, do not move the camera while itis switched on. Unplug the adapter from the AC power outlet after you havesw...

V2750 “Out-of-Box” Guide – ViviCam 2750 – Helpful hints 1) First. Charge your batteries. Your new ViviCam 2750 is supplied with 4 AA Nickel- Metal Hydride (NiMH) rechargeable batteries. Charge them overnight for bestperformance. These NiMH rechargeable batteries should last for many chargecycles. If...

DIGITAL PRODUCTS Original Purchaser's Name:______________________________________________________Address:_____________________________________________________________________City: __________________________ State: _______________Zip Code: ________________Telephone: ( )_______________________________...

PlaceStampHere Vivitar Corporation1280 Rancho Conejo Blvd.Newbury Park, California 91320 Attn: Customer Service Department ----------------------------------------------------------------------------------------------------------------------- Limited One Year Warranty Vivitar warrants each product s...