Page 2 - READ THIS FIRST; Trademark Information; Microsoft; Product Information
EN-2 READ THIS FIRST Trademark Information Microsoft ® and Windows ® are U.S. registered trademarks of Microsoft Corporation. Pentium ® is a registered trademark of Intel Corporation. Macintosh is a trademark of Apple Computer, Inc.SD TM is a trademark. Photo Explorer and Photo Express are trademark...
Page 3 - SAFETY INSTRUCTIONS; Read and understand all; Warnings; Do not disassemble, change or repair the camera.; This might cause the camera to fall or tilt over, causing injury.; Keep the batteries out of the reach of children.; This might cause you to fall over or result in traffic accident.
EN-3 SAFETY INSTRUCTIONS Read and understand all Warnings and Cautions before using this product. Warnings If foreign objects or water have entered the camera, turn the power OFF and remove thebatteries and the AC power adapter. Continued use in this state might cause fire or electric shock. Consult...
Page 4 - Cautions; Do not fire the flash close to anyone’s eyes.; This might cause damage to the person’s eyesight.; Do not subject the LCD monitor to impact.; This might cause damage to the camera.; Do not wrap the camera or place it in cloth or blankets.; California to cause birth defects or other reproductive harm.
EN-4 Cautions Insert the batteries paying careful attention to the polarity (+ or –) of the terminals. Inserting the batteries with its polarities inverted might cause fire and injury, or damage to thesurrounding areas due to the battery rupturing or leaking. Do not fire the flash close to anyone’s ...
Page 5 - Notes on Battery Usage
EN-5 Notes on Battery Usage Do not use batteries other than those specified for use with your ViviCam 8400. Use of unsuitablebatteries may result in the batteries splitting, or leaking and may cause a fire, injury, or soiling of thebattery compartment. When placing the batteries into the ViviCam 840...
Page 6 - CONTENTS; Tv
EN-6 CONTENTS INTRODUCTION ................................................ 8 Package Contents............................................ 9 GETTING TO KNOW YOUR VIVICAM 8400....... 10 Front View...................................................... 10Rear View..........................................
Page 8 - INTRODUCTION; Auto flash
EN-8 INTRODUCTION Thank you for purchasing the new ViviCam 8400!Equipped with a 8.0 Megapixels CCD sensor, your ViviCam 8400 delivers quality, 3264 x 2448 resolutionimages. Other features provided by the ViviCam 8400 include the following: 8.0 Megapixels A high-resolution CCD sensor provid...
Page 9 - Package Contents; Common Product Components:
EN-9 Package Contents Carefully unpack your kit box and ensure that you have the following items. In the event that any item ismissing or if you find any mismatch or damage, promptly contact your dealer. Common Product Components: ViviCam 8400 Digital Camera AV Cable User’s Manual Camera Strap USB C...
Page 10 - GETTING TO KNOW YOUR VIVICAM 8400; Front View; DC in 3V terminal
EN-10 GETTING TO KNOW YOUR VIVICAM 8400 Front View 2 3 4 1 9 8 7 6 5 10 1 . Shutter button2 . Flash3 . Microphone4 . Lens5 . Power button 6 . Mode dial7 . Viewfinder window8 . Self-timer LED9 . PC (USB) / AV Out terminal 10. DC in 3V terminal
Page 11 - Rear View; Playback button
EN-11 2 3 4 56789 10 1112 14 15 16 1 13 Rear View 1 . Viewfinder2 . Diopter adjustment dial3 . Viewfinder LED4 . / Zoom in (telephoto) button / Zoom out (wide-angle) button/ Thumbnail button 5 . Playback button 6 . Strap holder7 . S Arrow button (Up) / Focus button 8 . W Arrow button (Left)Flash but...
Page 12 - Mode Dial; Mode
EN-12 Mode Dial You can select from seven modes and setup mode according to conditions to achieve the desired effect. Mode Description 1 . Power button Press to turn on/off the power. 2 . P Program Select this mode to permit the shutter speed and apertureto be set automatically. 3 . A Auto Select th...
Page 13 - LCD Monitor Information; Camera Mode; AF
EN-13 LCD Monitor Information Camera Mode 1 . Mode indication [ P ] Program Mode [ A ] Auto Mode [ ] Video Mode [ M ] Manual Mode [ Av ] Aperture priority Mode [ Tv ] Shutter speed priority [ SCENE ]SCENE Mode 2 . Image quality [ ] Fine [ ] Normal [ ] Economy 3 . Image size [ ] 3264 x 2448[ ] 2272 x...
Page 15 - Installing the Batteries
EN-15 PREPARING THE VIVICAM 8400 Installing the Batteries You can use 2 AA size batteries to power the ViviCam 8400. Make sure that the power of the ViviCam 8400is off before inserting or removing the batteries. 1 . Make sure the ViviCam 8400 is turned off.2 . Open the battery cover.3 . Insert the b...
Page 16 - Using the AC Power Adapter (Optional Accessory); . Connect the other end to an electrical outlet.
EN-16 Using the AC Power Adapter (Optional Accessory) Use of the AC power adapter is recommended if you intend to use the LCD monitor for a long time orconnect the ViviCam 8400 to a PC. 1 . Make sure your ViviCam 8400 is turned off.2 . Connect one end of the AC power adapter to the camera jack label...
Page 17 - Inserting and Removing an SD Memory Card (Optional Accessory); . Make sure your ViviCam 8400 is turned off before inserting or
EN-17 Inserting and Removing an SD Memory Card (Optional Accessory) The ViviCam 8400 comes with 32MB of internal memory, allowing you to store captured still images orvideo clips in the ViviCam 8400. You can also expand the memory capacity by using an optional SD(Secure Digital) memory card so that ...
Page 18 - Indicator
EN-18 Attaching the Camera Strap Attach the strap as shown in the illustration. 2 1 LED Indicators Indicator State Description/Activity LED indicator Solid red The ViviCam 8400 is powering up. Solid green The ViviCam 8400 is ready to record images (or movies). LED indicator Solid green USB communica...
Page 19 - GETTING STARTED; Turning the Power On/Off; pressing the button.
EN-19 GETTING STARTED Turning the Power On/Off Press the button until the ViviCam 8400 turns on.To turn the power off, press the button again. Choosing the Screen Language Follow the steps below to choose the desired language.1 . Rotate the mode dial to and turn your ViviCam 8400 on by pressing the ...
Page 20 - Setting the Date and Time
EN-20 Setting the Date and Time Follow the steps below to set the date display style, current date and time.1 . Rotate the mode dial to and turn your ViviCam 8400 on by pressing the button. The [Set-up1] menu is displayed. 2 . Use T to select [Date & Time], then press the button. ...
Page 21 - Formatting an SD Memory Card or Internal Memory; . Rotate the mode dial to and turn your ViviCam 8400 on by
EN-21 Formatting an SD Memory Card or Internal Memory The term “Formatting” means preparing an “SD Memory Card” to record images; this process is also called“initialization”. This utility formats the internal memory (or memory card) and erases all stored images anddata. 1 . Rotate the mode dial to a...
Page 22 - Using the LCD Monitor; . Rotate the mode dial to; SCENE; or
EN-22 Using the LCD Monitor Your ViviCam 8400 is equipped with a 2.0" full color TFT LCD monitor to help you compose images,replay recorded images/video clips or adjust menu settings. The mode icons, text and numbers displayedon the monitor may vary according to the current settings. 1 . Rotate ...
Page 23 - PHOTOGRAPHY MODE; Shooting Images - The Basics
EN-23 PHOTOGRAPHY MODE Shooting Images - The Basics 1 . Rotate the mode dial to A , P , SCENE , Tv , Av or M and turn your ViviCam 8400 on by pressing the button. 2 . Compose the image on the monitor screen so that the main subject is within the focus frame. 3 . Press the shutter button down half wa...
Page 24 - Setting Image Resolution and Quality
EN-24 Setting Image Resolution and Quality As you get to know the ViviCam 8400, you can set the image resolution (number of vertical andhorizontal pixels) and image quality (compression ratio) based on the types of images you want to shoot.These settings affect the number of images that can be store...
Page 25 - Using the Zoom Function; smaller by pressing the
EN-25 Using the Zoom Function This ViviCam 8400 is equipped with a 3x optical zoom lens allowing you to capture telephoto or wide-angle shots. By using the optical zoom function, images appear closer by pressing the button, or smaller by pressing the button. You can further enlarge the subjects with...
Page 26 - Setting Focus
EN-26 Focus mode Description Macro Select macro to capture close-up images. When the lens is zoomed to its widestposition you may focus on objects as close as 5 cm.When the lens is zoomed to itstelephoto position (3x zoom) you can focus as close as 30 cm. Infinity The infinity setting is useful for ...
Page 27 - Using the Flash
EN-27 Using the Flash The flash is designed to function automatically when lighting conditions warrant the use of flash. TheViviCam 8400 has four flash modes: Auto Flash (default), Red Eye Reduction, Forced Flash and No Flash. Youcan record an image using a flash mode that best suits your requiremen...
Page 30 - Setting White Balance
EN-30 Setting White Balance This feature lets you make adjustments to compensate for different lighting types according to yourshooting conditions. 1 . Rotate the mode dial to P , SCENE , Tv , Av or M . 2 . Press the button to turn on the power.3 . Press , then the [Mode1] menu is displayed.4 . Use ...
Page 31 - USING THE MODE DIAL
EN-31 USING THE MODE DIAL Simple Mode [ A ] A (Auto) mode is the simplest way which allows you to take still pictures without having to set special functions or manual adjustments. The ViviCam 8400 sets the optimal focusing and exposure. 1 . Rotate the mode dial to A and turn your ViviCam 8400 on by...
Page 34 - ADVANCED SHOOTING; Burst
EN-34 ADVANCED SHOOTING Burst This mode is used for continuous shooting. Pictures are taken continuously while the shutter releasebutton is pressed. 1 . Rotate the mode dial to A , P , SCENE , Tv , Av or M and turn your ViviCam 8400 on by pressing the button. In A (Auto) Mode, press to access in men...
Page 36 - Selecting the Metering Mode
EN-36 Selecting the Metering Mode You can select the metering mode that sets which part of the subject to measure to determine theexposure. 1 . Rotate the mode dial to P , SCENE , Tv , Av or M and turn your ViviCam 8400 on by pressing the button. 2 . Press , then use X to select the [Mode2] menu. 3 ...
Page 37 - PLAYBACK MODE - THE BASICS; Viewing Images
EN-37 PLAYBACK MODE - THE BASICS Viewing Images You can display the still images you have just captured. 1 . Press the button to turn on the ViviCam 8400.2 . Press the (Playback) button. The last recorded image appears on the LCD monitor. 3 . Use W or X to select the desired images. To view the prev...
Page 38 - Magnifying Images; To view the next image, press the
EN-38 Magnifying Images While reviewing your images, you may enlarge a selected portion of an image. This magnification allowsyou to view fine details. The zoom factor displayed on the screen shows the current magnification ratio. 1 . Press the (Playback) button. The last recorded image appears on t...
Page 39 - Thumbnail Display; The last recorded image appears on the LCD monitor.
EN-39 Thumbnail Display This function allows you to view 9 thumbnail images on the LCD monitor simultaneously so you maysearch for a particular image. 1 . Press the (Playback) button. The last recorded image appears on the LCD monitor. 2 . Press the / button once. Nine thumbnail images are displayed...
Page 40 - Slideshow Display
EN-40 Slideshow Display The slide show function enables you to play your images back automatically in sequential order. This isvery useful for reviewing recorded images and for presentations. 1 . Press the (Playback) button. The last recorded image appears on the LCD monitor. 2 . Press . The [Playba...
Page 42 - VIDEO MODE; Recording Video Clips
EN-42 VIDEO MODE Recording Video Clips This mode allows you to record video clips with sound using the built-in microphone. 1 . Rotate the mode dial to mode and turn your ViviCam 8400 on by pressing the button. 2 . Press the shutter button to start recording.3 . To stop recording, press the shutter ...
Page 43 - Playing Back Video Clips
EN-43 Playing Back Video Clips You can play back recorded video clips. A guide to operation appears on the LCD monitor during thevideo playback. 1 . Press the (Playback) button. 2 . Use W or X to go through the images until the video clip you want to play back is displayed. To view the previous imag...
Page 44 - PLAYBACK MODE – ADVANCED FEATURES; Playing Back Still Images/Video Clips on TV; . Connect one end of the A/V cable to the A/V terminal of the
EN-44 PLAYBACK MODE – ADVANCED FEATURES Playing Back Still Images/Video Clips on TV You can also playback your images on a TV screen. Before connecting to any device, make sure toselect NTSC/PAL system to match the video output system of the video equipment you are going toconnect to the ViviCam 840...
Page 45 - Deleting Images/Video Clips
EN-45 Deleting Images/Video Clips Use this function to delete one or all images/video clips stored in the internal memory or memory card.Please note that the deleted images or video clips cannot be recovered. Exercise caution beforedeleting a file. 1 . Rotate the mode dial to A , P , SCENE , Tv , Av...
Page 46 - Protecting Images/Video Clips
EN-46 Protecting Images/Video Clips Sets the data to read-only to prevent images from being erased by mistake. 1 . Press the (Playback) button. The last recorded image appears on the LCD monitor. 2 . In (Playback) mode, use W or X to select the desired images. To view the previous image, press the W...
Page 47 - Connecting to a PictBridge Compliant Printer; Connecting the camera to the printer
EN-47 Connecting to a PictBridge Compliant Printer Even if you do not have a computer, you can connect the camera directly to a printer that supportsPictBridge to perform image selection and printing using the camera monitor screen and controls. Youmay also specify which images you want to print and...
Page 49 - Step; Use
EN-49 This starts printing and displays the message “Transferring” on the monitorscreen. The message will disappear after the printing is finished. * To cancel printing: Pressing the button during print data transfer displays the screen for selecting whether to [Continue] or [Cancel] printing. 7 Can...
Page 51 - Step 1: Install the USB driver; Installation on Windows 98 & 98SE; Follow the on-screen instructions to complete the installation.; Installation on MAC OS 9.0
EN-51 Step 1: Install the USB driver Installation on Windows 98 & 98SE The USB driver on the supplied CD-ROM is exclusively for Windows 98 and 98SE. Windows 2000/ME/XPusers need not install the USB driver. 1 . Insert the enclosed CD-ROM into your CD-ROM drive.2 . When the welcome screen appears,...
Page 52 - Step 2: Connect the ViviCam 8400 to your computer
EN-52 Step 2: Connect the ViviCam 8400 to your computer 1 . Rotate the mode dial to and turn your ViviCam 8400 on by pressing the button. 2 . Press X to select the [Set-up2] menu, then use T to select [USB Mode]. 3 . Use T to select [PC], then press the button. 4 . Connect one end of the USB cable t...
Page 53 - Step 3: Download images or video clips; Windows
EN-53 Step 3: Download images or video clips When the ViviCam 8400 is turned on and connected to your computer, it is considered to be a disk drive,just like a floppy disk or CD. You can download (transfer) images by copying them from the “Removabledisk” (“untitled” or “unlabeled” disk on a Macintos...
Page 54 - EDITING SOFTWARE INSTALLATION; Installing Photo Explorer; Ulead; Install Ulead; ”. Follow the on-screen instructions to complete the
EN-54 EDITING SOFTWARE INSTALLATION Installing Photo Explorer Ulead ® Photo Explorer provides a simple and efficient way to transfer, browse, modify and distribute digital media. Acquire photos, video or sound clips from various digital device types and easily browseor add personal descriptions; mak...
Page 55 - Installing Photo Express
EN-55 Installing Photo Express Ulead ® Photo Express is complete photo project software for digital images. The step-by-step workflow, visual program interface, and in-program help assist users in creating exciting photo projects. Acquiredigital photos effortlessly from ViviCam 8400 or scanners. Org...
Page 56 - INSTALLING ADOBE ACROBAT READER; . Insert the CD-ROM that came with the ViviCam 8400 into the; Install Acrobat Reader; Follow the on-screen instructions to complete the installation.
EN-56 INSTALLING ADOBE ACROBAT READER The CD-ROM includes a PDF (portable document format) copy of the user’s manual. To view a PDF youmust have Adobe Acrobat Reader installed in your computer. Adobe Acrobat Reader is included on theViviCam 8400 CD ROM. Using Adobe Acrobat Reader, you can read the u...
Page 57 - USER MANUAL; Install User’s Manual
EN-57 USER MANUAL A copy of the user manual is provided on the CD-ROM in PDF format. It is a backup copy of the printedmanual.If you misplace the printed guide, you may print another copy from the CD-ROM. The onlyrequirement for viewing the User Manual on the CD-ROM is that you have Acrobat Reader (...
Page 58 - MENU OPTIONS; Camera Menu; tem
EN-58 MENU OPTIONS Camera Menu This menu is for the basic settings to be used when capturing still images. 1 . Rotate the mode dial to A , P , SCENE , Tv , Av or M and turn your ViviCam 8400 on. 2 . Press , then use W or X to select the [Mode1] / [Mode2] / [Mode3] menu. In A (Auto) Mode, press to ac...
Page 60 - Item
EN-60 Mode2 Item Functional Description Metering Refer to section in this manual titled “Selecting the Metering Mode” forfurther details. Capture Refer to “Camera Menu - In A (Auto) Mode” in LIST OF MENU OPTIONS. Mode Digital Zoom This sets whether or not to use digital zoom at the time of shooting....
Page 62 - Video Menu
EN-62 Video Menu This menu is for the basic settings to be used when recording video clips. 1 . Rotate the mode dial to mode and turn your ViviCam 8400 on. 2 . Press , then use S or T to select the option item, then press the button. 3 . Use S or T to select the desired setting, and press the button...
Page 63 - Playback Menu
EN-63 Playback Menu In the (Playback) menu, you can choose the settings to be used for playback. 1 . Press the (Playback) button. The last recorded image appears on the LCD monitor. 2 . Press ,then use W or X to select [Playback1] or [Playback2] menu. 3 . Use S or T to select the desired setting and...
Page 65 - Setup Menu
EN-65 Setup Menu This feature allows you to choose your ViviCam 8400‘s default settings. 1 . Rotate the mode dial to (Setup) mode and turn your ViviCam 8400 on.2 . Press ,then use W or X to select the [Set-up1] / [Set-up2] / [Set-up3] menu. 3 . Use S or T to select the desired option item, then pres...
Page 67 - CONNECTING THE VIVICAM 8400 TO OTHER DEVICES
Page 68 - VIVICAM 8400 SPECIFICATIONS
EN-68 VIVICAM 8400 SPECIFICATIONS Item Description Image Sensor CCD Effective pixels 8.0 Mega pixels Image size Still image: 3264 x 2448, 2272 x 1704, 1600 x 1200, 640 x 480Video clip: 640 x 480 Image quality Still image: Fine, Normal, EconomyMovie image: Economy Recording media 32MB internal memory...
Page 69 - APPENDIX
EN-69 APPENDIX Troubleshooting Guide Symptom Possible causes Solutions / Corrective Actions The camera does notpower on. The ViviCam 8400 suddenly powers down. The image is notcaptured when theshutter button ispressed. The flash does not fire. Continuous shootingis not possible. Cannot tra...
Page 70 - Possible Number of Recordable Images; Quality; Approximate Duration of Recording Time; Image size
EN-70 Possible Number of Recordable Images The frame counter indicates the approximate number of images that can be stored on the SD memory card. Thenumber of recordable images may vary depending on the recorded subject, the capacity of the memory card, thereare files other than images or ...
Vivitar 8400
Manual
Vivitar VIV-13MM-C
Manual
Vivitar V-800MR
Manual
Vivitar X026
Manual
Vivitar VIV-CV-1225V
Manual
Vivitar VT027-SILVER
Manual
Vivitar DVR 426HDv2
Manual
Vivitar VIV-AV-842
Manual
Vivitar DVR 528
Manual
Vivitar X014
Manual
Vivitar 5028
Manual
Vivitar DVR940HXD-BLK
Manual
Vivitar DVR620
Manual
Vivitar T135
Manual
Vivitar VIV-13MM-P
Manual
Vivitar 3765
Manual
Vivitar 9112
Manual
Vivitar Vivicam 3705
Manual
Vivitar V5118-BLK
Manual
Vivitar VX029-GRPH
Manual