Viking VRBD/VUBD 24" W. BEVERAGE DISPENSER - Manuals

Page 2 - BUILT-IN INSTALLATION; Select Location; ELECTRICAL CONNECTION; Proper Disposal of Your Old Refrigeration Product

2 BUILT-IN INSTALLATION Select Location The proper location will ensure peak performance of your appliance. Choose a location where the unit will be out ofdirect sunlight and away from heat sources. Units with fan cooled condensers can be built-in. Unit should be operated in a properly ventilated ar...

Page 3 - LEVEL UNIT

3 CASTERS Your beverage dispenser is equipped with four casters. thefront two casters can be locked. For built-in applications, the four casters can be removed byremoving the nut located inside the dispenser cabinet andthen pulling the threaded caster spindle through the base ofthe unit. CABINET CUT...

Page 4 - DIMENSIONS - FREESTANDING MODELS; FRONT

4 DIMENSIONS - FREESTANDING MODELS FRONT SIDE TOP 24 5/8”(62.5 cm) 41 25/32”(106.2 cm) 4 3/16”(10.6 cm) 2 1/16”(5.2 cm) 1 1/4”(3.2 cm) 35 9/16”(95.4 cm) 25 1/8” (63.8 cm) 12 7/8” (32.7 cm) 24 5/8”(62.5 cm) 22” (55.9 cm) 13 3/4”(34.9 cm) 12 5/16” (31.3 cm) 23 1/8” (58.7 cm) 3/4” (1.9 cm) TYP 3/4” (1....

Page 5 - Rear Wall

5 CABINET CUTOUT -UNDERCOUNTER MODELS A 24” (61.0 cm)* B Min. 34 1/8” (87.9 cm Max. 35 1/8” (89.2 cm) C 24” (61.0 cm) Rear Wall Countertop Countertop 24” (61.0 cm) Standard Cabinet Depth 25” (63.5 cm) Standard Cabinet Depth 1 1/2”(3.8 cm) 1 11/32” (3.4 cm)TYP 1 11/32” (3.4 cm)TYP 12” (30.5 cm) 11” (...

Page 6 - DIMENSIONS - UNDERCOUNTER MODELS

6 DIMENSIONS - UNDERCOUNTER MODELS FRONT SIDE TOP 23 7/8” (60.7 cm) Min 34”(86.4 cm)Max 35”(88.9 cm)with levelinglegs fullyadjusted 47 1/4” (120.0 cm) 30 3/4” (78.1cm) 22” (55.9 cm) 24 3/8” (61.6 cm) 26 7/8” (68.3 cm) 24 3/8” (61.9 cm) 23 7/8” (60.7 cm) 12” (30.5 cm) 4” (10.2 cm) 11” (27.9 cm) 5” (1...

Page 7 - ASSEMBLY; It is

7 ASSEMBLY 1. Screw the black faucet knob ontothe faucet. 3. Attach the clear beverage linecoming from thedraft tower tothe keg coupler.Use the blackwasher insidethe hex nut andtighten securelywith crescentwrench. 5. Attach one end of the red airhose to the hosebarb on the CO2regulator, usingone of ...

Page 9 - TAPPING PROCEDURES; TWIN PROBE KEG TAPS; Insert Probes; and Budweiser; Quarter Barrel

9 TAPPING PROCEDURES 1. Align lug locks on tavern head with lug housing in topof key; insert tavern head. 2. Turn tavern head handle 1/4 turn clockwise; the tavern headis now secured to keg. 3. Rotate on/off valve handle 1/4 turn clockwise to open beer and CO2ports in keg. The keg is now tapped. TWI...

Page 10 - not use strong cleaners or scouring powder or pads.

10 DRAIN HOSE AND CONTAINER Before using the beverage dispenser, make sure the drain hose and container are properly installed.1. Attach the hose to the drain.2. Attach the container to the hose.3. Empty the container when it becomes full.4. Rinse both the hose and container before reattaching to th...

Page 11 - OPERATING INSTRUCTIONS; WIRING DIAGRAM

11 OPERATING INSTRUCTIONS SETTING THE CONTROLNOTE: The control is factory set for the ideal draft beer temperature - 38oF (3.3oC). (Temperature setting may need adjustments depending on ambient temperature.) Initially set the cold control knob midway between the numbers. Allow at least 48 hours for ...

Page 12 - HOW TO DRAW THE PERFECT GLASS OF BEER; Start with a clean beer glass that has been

12 HOW TO DRAW THE PERFECT GLASS OF BEER 1. Start with a clean beer glass that has been wetted in cold water. Place the glass at a45 o angle, one inch below the faucet. Do not let the glass touch the faucet .. Open the faucet all the way. 2. After the glass has reached half full, gradually bring the...

Page 13 - DESCRIPTION; Wild Beer

13 ENERGY SAVING TIPS Ways to save power, save money, and still enjoy your beverage dispenser. •Reduce door openings.•Close the door as soon as you can.•Keep the coils on bottom of the refrigerator clean.•Adjust the temperature control to a warmer setting when practical.•Keep unit away from the stov...

Page 14 - Condenser

14 SERVICE INFORMATION It is assumed that your beverage dispenser has been properly installed in accordance with all specifications and localcodes. If your beverage dispenser should fail to operate, review the common draft problems before calling for service. If service is required:1. Call your deal...

Page 15 - ONE YEAR FULL WARRANTY

15 PROFESSIONAL SERIES 24” W. BEVERAGE DISPENSER WARRANTY ONE YEAR FULL WARRANTY Built-in/freestanding beverage dispensers and all of their components and accessories, except as detailed below*, are warranted to be free from defects in material or workmanship under normal household use for a period ...

Page 16 - Specifications subject to change without notice

Specifications subject to change without notice F1755F (PS0205VR)