Page 2 - Congratulations; Getting Started; Operation; Table of Contents
Congratulations and welcome to an elite world of ownership. We hope you will enjoy and appreciate the care and attention we haveput into every detail of your new, state-of-the-art cooktop. Your cooktop is designed to offer years of reliable service. This Use and Care Manual will provide you with the...
Page 3 - IMPORTANT–; Please Read and Follow; DANGER
3 Warning and Important Safety Instructions appearing in this manual are not meant to cover all possible conditionsand situations that may occur. Common sense, caution, and care must be exercised when installing, maintaining, oroperating this appliance. ALWAYS contact the manufacturer about problems...
Page 4 - To Prevent Fire or Smoke Damage; CAUTION
4 IMPORTANT– Please Read and Follow To Prevent Fire or Smoke Damage • Be sure all packing materials are removed from the appliance before operating it. • Keep area around appliance clear and free from combustible materials, gasoline, and other flammable vapors and materials. • If appliance is instal...
Page 5 - WARNING
5 • Once the unit has been installed as outlined in the Installation Instructions, it is important that the fresh air supply is notobstructed. The use of a gas cooking appliance results in the production of heat and moisture in the room in which it is installed.Ensure that the kitchen is well-ventil...
Page 6 - Cookware; Before Using Cooktop
6 All products are wiped clean with solvents at the factory to remove any visible signs of dirt, oil, and grease which may have remainedfrom the manufacturing process. All models include: • Automatically electric spark ignition/re-ignition burners light at any position on the knob and re-light if ex...
Page 7 - Surface Operation; Surface Cooking Tips
7 Lighting Burners All burners are ignited by electric ignition. There are no open-flame, “standing” pilots. Surface Burners-Automatic Reignition To light the surface burners, push and turn the appropriate control knob counterclockwise to any position.This control is both a gas valve and an electric...
Page 8 - Cleaning and Maintenance; Surface Burners; Burner Caps; Burner Head; Burner Base; Cooktop Surfaces
8 Cleaning and Maintenance Any piece of equipment works better and lasts longer when maintained properly and kept clean. Cooking equipment is no exception.Your cooktop must be kept clean and maintained properly. Before cleaning, make sure all controls are in the “OFF” position. Surface Burners *Note...
Page 9 - Control Panel; Control Knobs; Stainless Steel Parts
9 Control Panel DO NOT use any cleaners containing ammonia, abrasives, or stainless steel cleaners on any surface that containsgraphics. They could remove the graphics from the control panel. Use hot, soapy water and a soft clean cloth. DO NOT spray liquids directly onto control panel. Control Knobs...
Page 10 - Service Information
10 Service Information If service is required, call your authorized service agency. The name of the authorized service agency can be obtained from the dealer or distributor in your area. Have the following information readily available: • Model number • Serial number • Date purchased • Name of deale...
Page 11 - Warranty
11 Warranty BUILT-IN GAS COOKTOP WARRANTY TWO YEAR FULL WARRANTY Built-in cooktops and all of their component parts, except as detailed below*, are warranted to be free from defective materials or workmanship in residential housed hold use for a period of two (2) years from the date of original reta...