Viking F21169 EN - Manuals

General Information 11 To ensure proper ventilation for your refrigerator,allow for a 1/2" (1.25 cm) space on each side andat the top. Allow 1/2" (1.3 cm) of space behindthe refrigerator. If your refrigerator has an icemaker, allow extra space at the back for the waterline connections. When ...

13 Remove and Replace Handles 1. Using a 3/32"or 1/8” hex wrench, loosen the two set screws located on the side of eachhandle. 2. Pull the handle straight out from the door. Make sure you keep the screws for reattachingthe handles. 3. To replace the handles, reverse the directions. Remove Doors ...

Installation 15 Water Supply Requirements Gather the required tools and parts beforestarting installation. Read and follow theinstructions provided with any tools listed here. TOOLS NEEDED: • Flat-blade screwdriver• 7/16" and 1/2" Open-end or two adjustable wrenches • 1/4" Nut driver• 1/...

17 1 2 Remove toe grille. Grasp firmly and pull outward to unclip. To raise the front of the refrigerator, turn the leveler foot screw clockwise. Note: Having someone push against the top of the refrigerator takes some weight off the leveler foot screws. 3 4 To lower the front of the refrigerator, t...

19 Service & Registration Only authorized replacement parts may be used in performing service on the appliance. All servicing should be referred to a qualified technician. Contact Viking Range Corporation, 1-888-845-4641, for the nearest service parts distributor in your area or write to: VIKING...