ViewSonic VS14691 - Manuals

Page 2 - Compliance Information; compliance could void your authority to operate the equipment.; For Canada

i Compliance Information For U.S.A. This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired ope...

Page 3 - ii; Important Safety Instructions; Read these instructions completely before using the equipment.

ii Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expo...

Page 4 - iii; Declaration of RoHS Compliance; Substance; Examples of exempted components are:

iii Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to com...

iv Copyright Information Copyright © ViewSonic ® Corporation, 2013. All rights reserved. ViewSonic ® , the three birds logo, OnView ® , ViewMatch ™ , and ViewMeter ® are registered trademarks of ViewSonic ® Corporation. Disclaimer: ViewSonic ® Corporation shall not be liable for technical or editori...

Page 6 - Table Of Contents; Connecting Multiple Displays in a Daisy-chain Configuration

v Table Of Contents 1. Unpacking and Installation ............................................................................................................1 1.1. Unpacking ................................................................................................................................

Page 7 - Technical Specifications

vi 4.2.4. PIP menu .....................................................................................................................174.2.5. CONFIGURATION1 menu ...........................................................................................184.2.6. CONFIGURATION2 menu ..................

Page 8 - Unpacking and Installation; consult your service agent.

1 1. Unpacking and Installation 1.1. Unpacking • This product is packed in a carton, together with the standard accessories.• Any other optional accessories will be packed separately.• Due to the size and weight of this display it is recommended for two people to move it.• After opening the carton, ...

Page 9 - To install table stands:; To remove table stands:; Spread a protective sheet on a flat surface.

2 1.4. Installing and Removing Table Stands (optional) To install table stands: 1. Power off the display.2. Spread a protective sheet on a flat surface. 3. Grab the carrying handles and place the display face-down on the protective sheet. 4. After inserting the stand in the guide block, tighten the ...

Page 10 - To install OPS Module:; Insert OPS module and then fix by screw.; Screw; OPS; To remove OPS Module:; Install OPS cover and then fix by screw.

3 1.5. Installing and Removing OPS module (CDP4235/CDP4635/CDX5550-L series) (optional) To install OPS Module: 1. Power off the display.2. Remove the cover of OPS after take screw off.3. Insert OPS module and then fix by screw. NOTE: Keep the OPS cover for future use. Screw Screw OPS To remove OPS M...

Page 11 - not to scratch the screen face.; Ventilation Requirements for enclosure locating; as shown in the diagram below.

4 1.6. Mounting on a Wall To mount this display to a wall, you will have to obtain a standard wall-mounting kit (commercially available). We recommend using a mounting interface that complies with TUV-GS and/or UL1678 standard in North America. CDP3235/CDP4235/CDP4635 series 100 200 200 100 Protecti...

Page 12 - Parts and Functions; POWER button; MENU button; Keyboard Control Lock Mode; Remote control sensor and power status indicator; SCHEDULE

5 2. Parts and Functions 2.1. Control Panel MUTE INPUT MENU 1 9 10 2 3 4 5 6 7 8 CDP3235/CDP4235/CDP4635 series 5 4 3 2 1 6 7 8 CDX5550-L 9 MENU 10 1 POWER button Use this button to turn the display on or put the display to standby. 2 MUTE button Switch the audio mute ON/OFF. 3 INPUT button • Use th...

Page 13 - MAIN POWER SWITCH; • AUDIO IN 1; SPEAKER SWITCH

6 2.2. Input/Output Terminals (OUT) CDP3235 CDP4235/CDP4635 series CDP3235 CDP4235/CDP4635/CDX5550-L series 16 1 2 3 4 6 7 9 11 10 13 14 10 8 5 15 15 (IN) (OUT) Pr Pb Y (IN) (IN) (OUT) 1 12 (OUT) 1 2 3 4 6 7 9 11 10 13 14 10 8 5 (IN) (OUT) 3 2 Pr Pb Y (IN) (IN) (OUT) 1 12 3 2 15 CDX5550-L 1 MAIN POW...

Page 14 - ] button to confirm and exit; Picture Format button

7 2.3. Remote Control 2.3.1. General functions POWER SMART VIDEO SOURCE PIP INPUT ON/OFF CHANGE BRIGHTNESS CONTRAST DISPLAY AUTO ADJUST MUTE VOL UP VOL DOWN EXIT MENU SET AUDIO SOURCE 1 10 11 12 131415 16 1718 19 20 2 3 4 5 6 78 9 1 [POWER] button Press to switch on the display from standby mode. Pr...

Page 15 - control

8 2.3.2. Inserting the batteries in the remote control The remote control is powered by two 1.5V AAA batteries.To install or replace batteries: 1. Press and then slide the cover to open it. 2. Align the batteries according to the (+) and (–) indications inside the battery compartment. 3. Replace the...

Page 16 - Connecting External Equipment; A cover for the power switch is provided to prevent the display

9 3. Connecting External Equipment 3.1. Using the Switch Cover A cover for the power switch is provided to prevent the display from being turned on or off accidentally.To lock the cover into position: 1. Align and insert the cover to the indentation located beside the main switch. 2. Use the screw t...

Page 17 - HDMI connector

10 3.2. Connecting External Equipment (DVD/VCR/VCD) 3.2.1. Using COMPONENT video input Audio Output To [AUDIO IN 2, 3] DVD / VCR / VCD COMPONENT (YPbPr) COMPONENT (YPbPr) 3.2.2. Using HDMI video input DVD / VCR / VCD HDMI connector HDMI connector

Page 19 - for user instructions.; PC or IBM compatible

12 3.3.3. Using HDMI input To [HDMI IN] PC or IBM compatible From HDMI output 3.3.4. CONNECTING THE TOUCH MODULE There are two ways to connect the touch module.1. Connect the USB cable on the display to a PC. The touch module supports easy Plug-and-Play operations. There is no need to install additi...

Page 21 - PC

14 3.5. Connecting Multiple Displays in a Daisy-chain Configuration You can interconnect multiple displays to create a daisy-chain configuration for applications such as a video wall.NOTE: Maximum 9 displays can be used in a daisy-chain configuration. 3.5.1. Video connection Connect one of the follo...

Page 22 - remote control; display’s control buttons; PIP; the flesh tone color turns slightly green. Press the [

15 4. OSD Menu An overall view of the On-Screen Display (OSD) structure is shown below. You can use it as a reference for further adjusting your display. 4.1. Navigating the OSD Menu 4.1.1. Navigating the OSD menu using the remote control EXIT MENU SET 1. Press [ MENU ] button on the remote control ...

Page 25 - The resolutions in the PIP and POP modes are configured as; amount of time specified.

18 By pressing the [ PIP ON/OFF ] button on the remote control, you can change the mode in the order shown below: PIP POP SBS ASPECT SBS FULL OFF The resolutions in the PIP and POP modes are configured as follows:PIP SIZE { SMALL } : 320 x 240 pixels { MIDDLE } : 480 x 320 pixels { LARGE } : 640 x 4...

Page 26 - DATE AND TIME; TILING

19 DATE AND TIME Adjust the current date and time for the display’s internal clock. EXIT MENU :SEL +-:ADJ :RETURN :EXIT MENU DATE AND TIME YEAR MONTH DAY HOUR MINUTE DAYLIGHT SAVING TIME 2011 08 04 20 20 OFF CURRENT DATE TIME 2011 . 08 . 04 00 : 18 : 10 1. Press [ SET ] button to enter the submenu. ...

Page 27 - POWER SAVE; HEAT STATUS

20 Example: 5 x 5 screen matrix (25 displays) H MONITORS = 5 displays V MONITORS = 5 displays 1 2 6 7 3 4 8 9 5 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 • H MONITORS - Select the number of displays on the horizontal side. • V MONITORS - Select the number of displays on the vertical side. • PO...

Page 28 - SCREEN SAVER

21 SCREEN SAVER Choose to enable the panel saving functions to reduce the risk of the “ image persistence ”. EXIT MENU :SEL +-:ADJ :RETURN :EXIT MENU SCREEN SAVER COOLING FAN BRIGHTNESSMOTION AUTO OFFOFF • { COOLING FAN } - Select { ON } to turn on the cooling fan all the time. Select { AUTO } to tu...

Page 29 - ADVANCED OPTION RESET

22 LAN SETTING Assign { IP ADDRESS }, { SUBNET MASK }, and { DEFAULT GATEWAY } for the display. PIP 123 EXIT MENU :SEL DHCP CLIENT IP ADDRESS SUBNET MASK DEFAULT GATEWAY LAN SETTING :RETURN :EXIT MENU OFF +-:ADJ • DHCP - Choose to enable or disable the DHCP function. If enabled, the display will be ...

Page 30 - INPUT

23 5. Input Mode VGA Resolution: Standard Resolution Active Resolution Refresh Rate Pixel Rate Aspect Ratio Stand for Mode H Pixels V Lines VGA 640 480 60 Hz 25.175 MHz 4:3 Video Graphic Array 480 72 Hz 31.5 MHz 480 75 Hz 31.5 MHz WVGA 720 400 70 Hz 33.75 MHz 16:9 Wide Video Graphic Array SVGA 800 6...

Page 31 - Cleaning and Troubleshooting; Caution When Using the Display; damage the cables and thus cause fire or electric shock.; Front Panel Cleaning Instructions; Do not scratch or hit the surface of the panel with fingers; Cabinet Cleaning Instructions; Do not scratch or hit the cabinet with fingers or hard

24 6. Cleaning and Troubleshooting 6.1. Cleaning Caution When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes...

Page 32 - Display image doesn’t fill up the full size; function in the Screen menu to fine tune

25 6.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected.2. The main power switch on the back of the display is not switched on. 3. The selected input has no connection.4. The display is in standby mode. 1. Plug in the power cord.2. Make sure th...

Page 33 - Specifications

26 7. Technical Specifications CDP3235Display: Item Specifications Screen Size (Active Area) 80.1cm/32”(31.5” viewable) Diagonal, 697.689mm(H), 392.256mm(V) Aspect ratio 16:9 Number of pixels 1366 (H) x 768 (V) Pixel pitch 0.51075 (H) x 0.51075 (V) [mm] Displayable colors 16.7M colors Brightness (ty...

Page 34 - Environmental Condition:

27 Gross Weight 16.5kg VESA Wall mount 400x200mm,200x200, M6 Environmental Condition: Item Specifications Temperature Operational 0 ~ 40°C Storage -20 ~ 60°C Humidity Operational 20 ~ 80% RH (No condensation) Storage 5 ~ 95% RH (No condensation) Altitude Operational 0 ~ 3,000 m Storage / Shipment 0 ...

Page 36 - CDP4235-T Touch specification

29 VESA Wall mount 400x200mm,200x200, M6 Gross Weight 27.5 Kg 26.8 Kg Environmental Condition: Item Specifications Temperature Operational 0 ~ 40°C Storage -20 ~ 60°C Humidity Operational 20 ~ 80% RH (No condensation) Storage 5 ~ 95% RH (No condensation) Altitude Operational 0 ~ 3,000 m Internal Spe...

Page 38 - CDP4635-T touch specification

31 VESA Wall mount 400x400mm,400x200mm, M6 Gross Weight 31 Kg Environmental Condition: Item Specifications Temperature Operational 0 ~ 40°C Storage -20 ~ 60°C Humidity Operational 20 ~ 80% RH (No condensation) Storage 5 ~ 95% RH (No condensation) Altitude Operational 0 ~ 3,000 m Internal Speaker: It...

Page 41 - Customer Support; You will need the product serial number.; Website

34 Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/Region Website T = Telephone F = FAX Email Australia/New Zealand www.viewsonic.com.au AUS= 1800 880 818 NZ= 0800 008 822 [email protected]...

Page 42 - Limited Warranty; VIEWSONIC; What the warranty covers:; for labor from the date of the first customer purchase.; Who the warranty protects:; This warranty is valid only for the first consumer purchaser.; What the warranty does not cover:; or failure to follow instructions supplied with the product.

35 Limited Warranty VIEWSONIC ® LCD Commercial Display What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty perio...

Page 43 - : ViewSonic LCD Commercial Display CD_LW01 Rev. 1a 02-11-09

36 Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose. Exclusion of damages: ViewSonic’s liability is limited to the cost of repair ...

Page 44 - Mexico Limited Warranty; of the first customer purchase.

37 Mexico Limited Warranty VIEWSONIC ® LCD Commercial Display What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warrant...