ViewSonic VS12464-1G - Manuals

ViewSonic VT2430 3 ENGLISH Antenna Installation Instructions 1. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges, Article 810...

ViewSonic VT2430 4 ENGLISH Getting Started Congratulations on your purchase of a ViewSonic TM LCD TV. Important! Save the original box and all packing material for future shipping needs. Mounting ViewSonic LCD TV to the wall The LCD TV can be used in a free standing position or wall-mounted. Before ...

ViewSonic VT2430 5 ENGLISH • Install the wall mount plate to the LCD TV using screws NO LONGER than 10mm, as longer screws found in universal (non-ViewSonic) wall mount kits may damage the power supply causing the unit to fail. The wall-mount screw type is M4 x L10. • Mount the wall mount bracket to...

ViewSonic VT2430 6 ENGLISH Front View of the Product Item Description 1 Power ON/OFF button Turn the power on from standby mode or turn the power off to return to the standby mode. 2 Power LED Indicator Lights up in blue when the TV is turned on. Lights up in orange when the TV is in standby mode. 3...

ViewSonic VT2430 7 ENGLISH Rear View of the Product Item Description 1 Power (AC input) Plug-in the supplied AC Power cord and connect to the AC input power source. 2 HDMI Input Terminal Connect this port to the HDMI/HDMI-DVI jack of the compatible equipment. 3 PC signal input Connect a 15-pin D-sub...

ViewSonic VT2430 8 ENGLISH Remote control button function as follow Button Description 1 信号源 INPUT Select the TV, AV, S-Video, YPbPr, HDMI, PC inputs as the video source signal. 2 确认 ENTER Press to confirm the selection in the OSD menu, or to enter the OSD menu you select. Press ENTER after you inpu...

ViewSonic VT2430 9 ENGLISH 2. Connecting RF antenna or Cable TV Wire Installation 1. Remove the battery cover by pulling then lifting the knob on the cover. 2. Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment. 3. Reattach the battery cover. 1. Insert Remote ...

ViewSonic VT2430 11 ENGLISH 4) With HDMI cable: HDMI Cable (not supplied) VCD or DVD Player (DVD Player should have the HDMI output terminal) PC VGA 15 Pin Cable 4. Connecting to a computer Connect the VGA cable from VGA output of the computer to the VGA terminal input of your LCD TV. Also, connect ...

ViewSonic VT2430 12 ENGLISH Connect the HDMI-DVI cable from the DVI output of the computer to the HDMI terminal input of the LCD TV. (Only image display is supported) 2) With HDMI-DVI cable: HDMI-DVI Cable (not supplied) PC AC wall socket 5. Connecting with the power cord Connect the power cord to t...

ViewSonic VT2430 13 ENGLISH Basic Operation To operate your LCD TV, you may use the TV remote control or buttons located at bottom of the LCD TV to select input source, change channels, or adjust volume. Turning on the LCD TV Before using the LCD TV: 1. Connect external equipment properly. 2. Insert...

ViewSonic VT2430 14 ENGLISH Picture Menu — To adjust the picture quality OSD Functions ADVANCED OPERATION—OSD MENU • Picture Mode: To select the picture mode. • Contrast: To adjust contrast of video. • Brightness: To adjust luminance of video. • Tint: To adjust tint level. • Color: To adjust colour....

ViewSonic VT2430 15 ENGLISH • OSD Language: To select the language of OSD from Simply Chinese, English, Traditional Chinese. • OSD H-Position: To adjust the horizontal position of OSD. • OSD V-Position: To adjust the vertical position of OSD. • OSD Timeout: To automatically shut off the OSD after a ...

ViewSonic VT2430 18 ENGLISH PC Menu — To adjust for PC It is only active in PC and HDMI (support PC mode). When input source is PC: When input source is HDMI(PC mode): • Auto Adjust: To process auto image adjustment by pressing ►. • Contrast: To adjust foreground luminance of video. • Brightness: To...

ViewSonic VT2430 19 ENGLISH Other Information Specifications LCD Type Color Filter Glass surface 23.6” TFT Active Matrix RGB 0.2715 (H) x 0.2715 (V) mm pixel RGB vertical stripe Anti-Glare Input signal RGB TV system Video Audio RGB analog (0.7/1.0 Vp-p, 75 ohms) Separate Sync, f h : 30-82 kHz, f v :...

ViewSonic VT2430 20 ENGLISH Troubleshooting Problem Possible Solution No power • Make sure the power cord is properly connected to the LCD TV AC power socket. • Make sure the AC power cord is properly connected to the wall outlet. • Make sure the DC power button is ON (Blue LED). • Plug another elec...

ViewSonic VT2430 21 ENGLISH Unit cannot be operated • External influences such as lightning or static electricity may cause improper operation. In this case, operate the unit after first turning on the power of the LCD TV and the AVC System, or unplug the AC cord for 1 to 2 minutes, then replug agai...

ViewSonic VT2430 22 ENGLISH Customer Support For technical support or product service, see the table below or contact your reseller. Note: You will need the product serial number. Country/ Region Web Site Telephone Email China www.viewsonic.com.cn 800 820 3870 [email protected] Hong Kong w...

ViewSonic VT2430 23 ENGLISH Limited Warranty VIEWSONIC TM LCD TV What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warr...