ViewSonic SCT35BKUS0 - Manuals

Page 2 - Compliance Information; FCC Statement; &RQVXOWWKHGHDOHURUDQH[SHULHQFHGUDGLR79WHFKQLFLDQIRUKHOS; For Canada

i Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired ...

Page 3 - ii; Important Safety Instructions; GHYLFHVLQFOXGLQJDPSOL¿HUVWKDWSURGXFHKHDW

ii Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. Heed all warnings. 4. Follow all instructions. 5. 'RQRWXVHWKLVHTXLSPHQWQHDUZDWHU:DUQLQJ7RUHGXFHWKHULVNRI¿UHRUHOHFWULFVKRFNGRQRWH[SRVHWKLVDSSDUDWXVWRUDLQRUPRL...

Page 4 - iii; Declaration of RoHS Compliance; Substance; Polybrominated diphenyl ethers

iii Declaration of RoHS Compliance 7KLVSURGXFWKDVEHHQGHVLJQHGDQGPDQXIDFWXUHGLQFRPSOLDQFHZLWK'LUHFWLYH(8RIWKH(XURSHDQ3DUOLDPHQWDQGWKH&RXQFLORQUHVWULFWLRQRIWKHXVHRIFHUWDLQ hazardous substances in electrical and electronic equipment (RoHS Directive) and is GHHPHGWRFRPSO\ZLWKWKHPD[LPXPFRQFHQWUDWLRQY...

Page 5 - iv; Copyright Information; LVDUHJLVWHUHGWUDGHPDUNRIWKH86(QYLURQPHQWDO3URWHFWLRQ; Display Sleep Mode; . Within 10 minutes of user inactivity, the display will enter; System Sleep Mode; NOTE; for optimal energy savings.

iv Copyright Information Copyright © ViewSonic ® &RUSRUDWLRQ$OOULJKWVUHVHUYHG ViewSonic, the three birds logo, OnView, ViewMatch, ViewMeter, and MultiClient are either registered trademarks or trademarks of ViewSonic Corporation. Microsoft ® , Windows ® , and MultiPoint™ are trademarks of the Mi...

Page 6 - Product Registration; For Your Records; Product disposal at end of product life

v Product Registration To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www.viewsonic.com. For Your Records Product Name: Model Number:Document Number:Serial Number:Purchase Date: SC-T35ViewSonic Th...

Page 7 - About This User’s Manual; Manual Structure and Subjects; $QRWHSURYLGHVLPSRUWDQWLQIRUPDWLRQIRUDVSHFL¿FVLWXDWLRQ; TIP; $WLSJLYHVDSLHFHRIXVHIXODGYLFHWRSHUIRUPDWDVNPRUHHI¿FLHQWO\; WARNING; to you, damage to your devices, or loss of data on your system.

vi About This User’s Manual 7KLVPDQXDOSURYLGHVGHWDLOHGLQVWUXFWLRQVRQKRZWRVHWXSXVHPDQDJHDQGPDLQWDLQ9LHZ6RQLF6&7 thin clients. Manual Structure and Subjects Chapter Subject 1 3URYLGHVDQRYHUYLHZRI9LHZ6RQLF6&7WKLQFOLHQWV 2 3URYLGHVGHWDLOHGLQVWUXFWLRQVRQKRZWRVHWXS9LHZ6RQLF6&7WKLQFOLHQWV 3URYL...

Page 8 - vii; Style Conventions

vii Style Conventions The following styles are used throughout this manual while referring to operational items on input devices, hardware panels, or application interfaces. Item Style Example keys on the keyboard bold Ctrl + F2 , Alt + F9 , Alt + Tab application windows or entry lists ¿UVWOHWWHU ca...

Page 9 - Table of Contents; Overview 1

Table of Contents Compliance Information i Important Safety Instructions ii Declaration of RoHS Compliance iii Copyright Information iv Product Registration v About This User’s Manual vi Manual Structure and Subjects vi Notes, Tips, and Warnings vi Style Conventions vii 1 Overview 1 1.1 Introduction...

Page 11 - Overview; This chapter provides an overview of your SC-T35 thin clients.

1 Overview 1 This chapter provides an overview of your SC-T35 thin clients. 1.1 Introduction Desktop virtualization and simple endpoint devices 2 1.2 Features Key features of ViewSonic SC-T35 2 1.3 Package Contents Check your package contents 3 1.4 Exterior Views Overview of thin client outside elem...

Page 13 - Contents; Views; Rear Panel; Left Front View

Overview Package Contents 1.3 Package Contents Please check your package contents. Ensure that all of the items are present in your package. If any items are missing or damaged, please contact your dealer immediately. ViewSonic SC-T35 ViewSonic SC-T35 AC adapter DVI-I to VGA adapter Stand (VESA plat...

Page 14 - Components

Overview Panel Components 4 1.5 Panel Components ViewSonic SC-T35 Front Panel No. Component Sign Name Description 1 Power LED Indicates the status of power. 2 Power button Press to power on the thin client. Long press to force power off the thin client. In Power-off state, connect a monitor to...

Page 15 - to connect your VGA monitor to SC-T35’s

Overview Panel Components 5 ViewSonic SC-T35 Rear Panel No. Panel Component Sign Component Name Description 6 DVI-D port Connects to a high quality digital display device such as a LCD monitor or a digital projector. 7 DVI-I port Connects to a high quality digital display device such as a LCD monito...

Page 16 - Indicators

Overview LED Indicators 6 1.6 LED Indicators Your SC-T35 is equipped with a Power LED to indicate the state of power. The meanings of LED signals are described as follows: LED Signal Meaning Power LED Off The client is off. Blue The client is on. The LAN port of your SC-T35 has two LED indicators sh...

Page 17 - Setting Up Your SC-T35

7 Setting Up Your SC-T35 2 This chapter provides detailed instructions on how to set up your SC-T35 thin clients. 2.1 Positioning Your SC-T35T35 To mount your SC-T35Step 1: Remove the Stand from Your SC-T35T35 Step 2: Understand Your Stand / VESA Mount Kit for SC- T35T35 Step 3: Store Screws inside ...

Page 18 - Your; uprightly; Step 1: Remove the Stand from Your SC-T35

Setting Up Your SC-T35 Positioning Your SC-T35 8 2.1 Positioning Your SC-T35 There are two ways to position your SC-T35: t Put it (with its stand) on a desk or a desired place uprightly . t Mount it on the back of a monitor using a VESA mount kit. To mount your SC-T35 on the back of a monitor, pleas...

Page 19 - Screws Stored Away inside the Bracket; Mount Holes on the Bracket; bracket

Setting Up Your SC-T35 Positioning Your SC-T35 Step 2: Understand Your Stand / VESA Mount Kit for SC-T35 The stand for your SC-T35 is dual-purpose: it can be used as a stand or as a VESA mount kit. All screws of different types supplied with the stand / VESA mount kit can be stored away inside the m...

Page 20 - To store screws inside the bracket, please do the following:; with the screw storage side upward.; Step 4: Remove Screws from the Bracket; with the screw storage side downward.; Square Hole

Setting Up Your SC-T35 Positioning Your SC-T35 10 Step 3: Store Screws inside the Bracket To store screws inside the bracket, please do the following: NOTE t It’s highly recommended to store screws inside the bracket when not needed to prevent them getting lost. 1. Place a sheet of paper or a piece ...

Page 21 - Assembling the AC Adapter; The supplied plug may vary, depending on different areas.

Setting Up Your SC-T35 Assembling the AC Adapter 11 Step 5: Mount Your SC-T35 To mount your SC-T35 on the back of a monitor, please do the following: 1. Refer to Step 2 and Step 4 to prepare required screws for mounting your SC-T35. t You will need two (2) screws of type 2 to secure the bracket to y...

Page 22 - Connected; To make connections for your SC-T35, please do the following:; Please note that you need to connect and turn on your monitor(s); adapter

Setting Up Your SC-T35 Getting Connected 12 2.3 Getting Connected To make connections for your SC-T35, please do the following: 1. Connect your SC-T35 to your local network with an Ethernet cable. 2. Connect a keyboard and mouse to your SC-T35. 3. Connect and turn on the monitor(s). NOTE t For your ...

Page 23 - Getting Started; This chapter provides the basics of how to use your SC-T35.

Getting Started 3 This chapter provides the basics of how to use your SC-T35. 3.1 Learning the Basics Step 1: Power On your SC-T35 6WHS&RQ¿JXUHWKH7LPH=RQH Step 3: Return to the Quick Connection ScreenStep 4: Access Desktops or Applications 15161718

Page 24 - Learning the Basics; Power on your SC-T35; Microsoft Remote Desktop Services (RDP sessions); Three client modes are available for your SC-T35:; quickly

Getting Started Learning the Basics 14 3.1 Learning the Basics The following steps will guide you through the basics of using your SC-T35: Step 1: Power on your SC-T35 Step 2: Configure the Time Zone Step 3: Return to the Quick Connection Screen (if needed) Step 4: Access Desktops or Applications t ...

Page 25 - Power On your SC-T35; connected and turned on; Press the Power button to turn on the client. Wait a moment for; ViewSonic Quick Connection Screen

Getting Started Learning the Basics 15 Step 1: Power On your SC-T35 To start using your SC-T35, please do the following: 1. Ensure that your monitor(s) is connected and turned on . NOTE t Please note that you need to connect and turn on your monitor(s) before powering up the thin client. Otherwise, ...

Page 26 - Configure the Time Zone; To set the time zone for your SC-T35, please do the following:; Setup; icon to launch ViewSonic Client Setup.; to apply, and then close ViewSonic Client Setup.; ViewSonic Client Setup; Navigation Area

Getting Started Learning the Basics 16 Step 2: Configure the Time Zone To set the time zone for your SC-T35, please do the following: 1. Click the Setup icon to launch ViewSonic Client Setup. NOTE t For detailed instructions on how to configure client settings and customize your SC-T35 with ViewSoni...

Page 27 - Return to the Quick Connection Screen; To return to; Local Linux Desktop; ViewSonic Quick Connection

Getting Started Learning the Basics 17 NOTE t Refer to the table above to set your time zone if needed. In case that you cannot find the place where you are located in this table, try other online resources or visit Time and Date AS at www.timeanddate.com . Step 3: Return to the Quick Connection Scr...

Page 28 - Access Desktops or Applications

Getting Started Learning the Basics 18 Step 4: Access Desktops or Applications Through ViewSonic Quick Connection screen, you can access three types of desktop virtualization services: Remote Desktop , Citrix , and VMware View . Icon Description Page Remote Desktop Click to access Microsoft Remote D...

Page 29 - Accessing Microsoft Remote Desktop Services; on ViewSonic Quick Connection screen (see the screen in; Connect; on the left of the Computer field.; OK; Esc; The remote desktop will be displayed on the screen.

Getting Started Learning the Basics Accessing Microsoft Remote Desktop Services To access Microsoft Remote Desktop services, please do the following: 1. Click on ViewSonic Quick Connection screen (see the screen in Step 4 ). 2. On the appeared window, type in the computer name or IP address of the s...

Page 30 - Accessing Citrix Services; Connecting to the Server; Log On; FQDN is the acronym of Fully Qualified Domain Name.; Logging On to Citrix Services; When connected to the server, the; first; I Understand the Risks; ViewSonic Citrix Connection Screen

Getting Started Learning the Basics 20 Accessing Citrix Services Connecting to the Server To connect to the server where the Citrix Web Interface is hosted, please do the following: 1. Click on ViewSonic Quick Connection screen (see the screen in Step 4 ). 2. On the appeared ViewSonic Citrix Connect...

Page 31 - The following are some examples of Citrix Logon screens.; Citrix Logon Screen

Getting Started Learning the Basics 21 The following are some examples of Citrix Logon screens. XenDesktop 5.6 Platinum: NOTE t To return to ViewSonic Quick Connection screen, press Esc . XenApp 6.0 Fundamentals: NOTE t To return to ViewSonic Quick Connection screen, press Esc . t If your XenApp ser...

Page 33 - Accessing Virtual Desktops and Applications; You will enter the; Use; Desktop Selection screen; Desktop Selection Screen

Getting Started Learning the Basics Accessing Virtual Desktops and Applications You will enter the Desktop Selection or Application Selection screen after logon. On the screen you can click to select the desired desktop or application(s). NOTE t You might enter the virtual desktop directly if only o...

Page 34 - Application Selection screen; Application Selection Screen

Getting Started Learning the Basics 24 XenApp 6.5 Platinum: 1. The Application Selection screen appears after logon. 2. Click to select the desired application(s). Application Selection Screen Virtual Desktop Example: Windows 7 Ultimate

Page 35 - Desktop Selection; Log Off; Citrix Logon screen; ViewSonic Quick Connection screen; Virtual Application Examples

Getting Started Learning the Basics 25 3. The selected application(s) will be displayed on the screen. NOTE t Clicking on Application Selection screen will bring the screen to the front and leave all launched application windows hidden behind. Use Alt + Tab to select and restore a hidden or minimize...

Page 36 - Accessing VMware View Services; To access VMware View services, please do the following:; Continue; A Welcome window might appear, click; drop-down menu to select the domain, and then click

Getting Started Learning the Basics 26 Accessing VMware View Services To access VMware View services, please do the following: 1. Click on ViewSonic Quick Connection screen (see the screen in Step 4 ). 2. On the appeared View Client window, enter the IP address or computer name of the VMware View Co...

Page 37 - The virtual desktop will be displayed on the screen.

Getting Started Learning the Basics 27 NOTE t A window might appear with a certificate message about the remote server. Consult the IT administrator for details and ensure the connection is secure first . To import a security certificate, on ViewSonic Quick Connection screen, click Setup > Applic...

Page 38 - Configuring Client Settings

28 Configuring Client Settings 4 This chapter provides instructions on how to configure advanced settings and customize your SC-T35 with ViewSonic Client Setup. 4.1 ViewSonic Client Setup Interface overviewAvailable settings at glance 2930 &RQ¿JXULQJ6\VWHP6HWWLQJV System tab overviewAvailable se...

Page 39 - ViewSonic Client Setup; On ViewSonic Quick Connection screen, click the; Interface Overview

&RQ¿JXULQJ&OLHQW6HWWLQJV ViewSonic Client Setup 4.1 ViewSonic Client Setup Your SC-T35 comes with ViewSonic Client Setup, the built-in local client management console to help you configure client settings and customize your SC-T35. 4.1.1 Interface Overview To access ViewSonic Client Setup on...

Page 41 - Configuring System Settings; Tab; settings of; System; tab, click the tab on ViewSonic Client Setup.; System Tab Overview

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6\VWHP6HWWLQJV 4.2 Configuring System Settings 4.2.1 System Tab Overview System tab enables you to configure settings for the operation and maintenance of clients. To access available settings of System tab, click the tab on ViewSonic Client Setup. Inte...

Page 43 - Configuring Time Zone and Time Server; The IP address of the default time server is; Save

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6\VWHP6HWWLQJV 4.2.3 Configuring Time Zone and Time Server The Time Zone setting allows you to configure the desired time zone and time server to get the accurate system time for your SC-T35. To set the desired time zone and time server, please do the f...

Page 44 - Setting Access Privileges and Password Only for Administrators; Under the Administrator section, click to check

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6\VWHP6HWWLQJV 4.2.4 Configuring the Access Privileges and Passwords of ViewSonic Client Setup You can configure the access privileges of ViewSonic Client Setup for SC-T35 users by the Password setting. NOTE t All SC-T35 users are allowed to access View...

Page 45 - Setting Access Privileges and Password Also for Standard Users; Under the User section, click to check; The User section appears only when; Active Admin Authorization; Type in the desired password, and then click

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6\VWHP6HWWLQJV Setting Access Privileges and Password Also for Standard Users To set access privileges and password also for standard users, please do the following: 1. On ViewSonic Client Setup, click System > Password . 2. Under the User section, c...

Page 46 - Configuring Shadow Settings for Remote Assistance; Under the Shadow section, click to check; Enable Shadow; if it’s not checked.; By default, the Shadow feature is enabled. Click; Change Password; the next step to set your password.

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6\VWHP6HWWLQJV 4.2.5 Configuring Shadow Settings for Remote Assistance The Shadow feature allows an administrator to remotely assist client users in resolving problems or configuring local settings. When this feature is enabled, an administrator can mon...

Page 47 - to save all the changes.; on the target client, an icon

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6\VWHP6HWWLQJV NOTE t On a remote computer, an administrator will need this password to use the Shadow feature (remote assistance) with the ViewSonic Device Manager console. For more information, please refer to the User’s Manual of ViewSonic Device Man...

Page 48 - Updating Firmware from the Host Server; allows client users to update firmware from its host server.

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6\VWHP6HWWLQJV 4.2.6 Updating Firmware from the Host Server Update Firmware allows client users to update firmware from its host server. NOTE t Ensure that your SC-T35 has been added into a managed group under ViewSonic Device Manager installed on a rem...

Page 49 - Update firmware

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6\VWHP6HWWLQJV 5. Click the drop-down menus to select the desired firmware version and other update options. )LUPZDUH8SGDWH2SWLRQV Item Description Firmware Version &OLFNWRVHOHFWWKHGHVLUHG¿UPZDUHYHUVLRQ Language Click to select the interface languag...

Page 50 - Enabling or Disabling the Appliance Mode; For more information on these modes, please refer to sections:; Enabling the Appliance Mode; To enable the Appliance mode, please do the following:; Applications; ”4.6.3 Configuring Basic RDP Connection Settings” on page 80

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6\VWHP6HWWLQJV 40 4.2.7 Enabling or Disabling the Appliance Mode The Appliance mode allows your SC-T35 to start up directly with the desired Microsoft Remote Desktop, Citrix ICA, or VMware View session. Under the Appliance mode, users will feel as if th...

Page 51 - “4.6.5 Configuring Advanced RDP Connection Settings” on page 83; Other settings of the Appliance mode appear.

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6\VWHP6HWWLQJV 41 NOTE t Please note that the Autostart mode also enables the client to start up directly with an RDP / ICA / View session and provides more configuration flexibility than the Appliance mode. For detailed information on the Autostart mod...

Page 53 - Disabling the Appliance Mode

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6\VWHP6HWWLQJV Disabling the Appliance Mode To disable the Appliance mode, please do the following: 1. Under the Appliance mode, exit the Full Screen mode of the RDP / ICA session, or release the keyboard and mouse from the View session (virtual desktop...

Page 54 - Enabling or Disabling the Quick Connection Mode

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6\VWHP6HWWLQJV 44 4.2.8 Enabling or Disabling the Quick Connection Mode The Quick Connection mode enables you to enter the ViewSonic Quick Connection screen after system startup. This setting is enabled by default. NOTE t For detailed instructions on ho...

Page 55 - to enable/disable the Quick Connection; to apply the change.

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6\VWHP6HWWLQJV 45 To enable/disable the Quick Connection mode, please do the following: 1. On ViewSonic Client Setup, click System > Quick Connection . 2. Click to check/uncheck Enable Quick Connection after Power-up to enable/disable the Quick Conne...

Page 56 - to allow/disallow the execution of the command-line functions.; to confirm your change.; On the local Linux desktop, click; START; to open the

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6\VWHP6HWWLQJV 46 4.2.9 Enabling or Disabling the Command-line Functions To enable/disable the execution of the text-based (command-line) functions, please do the following: 1. On ViewSonic Client Setup, click System > Terminal . 2. Click to check/un...

Page 57 - 0 Collecting Event Logs and Capturing Related Screens; The; Collecting Event Logs; To collect event logs of your SC-T35, please do the following:; You can find the log file set named

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6\VWHP6HWWLQJV 47 4.2.10 Collecting Event Logs and Capturing Related Screens The Error Report feature allows you to collect event logs and capture related screens for error reporting. Collecting Event Logs To collect event logs of your SC-T35, please do...

Page 58 - Capturing Error-Related Screens; to open the screen capturing program.

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6\VWHP6HWWLQJV 48 Capturing Error-Related Screens To capture error-related screens of your SC-T35, please do the following: 1. On ViewSonic Client Setup, click System > Error Report . 2. Click Launch Snapshot to open the screen capturing program. TIP...

Page 59 - Configuring User Interface Settings; User Interface; User Interface Tab Overview

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ8VHU,QWHUIDFH6HWWLQJV 4.3 Configuring User Interface Settings 4.3.1 User Interface Tab Overview User Interface tab enables you to configure settings for the user interface of clients. To access available settings of User Interface tab, click the tab on ...

Page 64 - Customizing Desktop and System Language Settings; a description of each setting item.

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ8VHU,QWHUIDFH6HWWLQJV 54 4.3.4 Customizing Desktop and System Language Settings To customize desktop and system language settings for your SC-T35, please do the following: 1. On ViewSonic Client Setup, click User Interface > Desktop . 2. Click drop-d...

Page 66 - Hiding or Showing Quick Access Shortcuts; disabled

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ8VHU,QWHUIDFH6HWWLQJV 56 4.3.5 Hiding or Showing Quick Access Shortcuts When the Quick Connection mode is disabled, the switch shortcuts ViewSonic Quick Connection on the START menu and local Linux desktop will be hidden. In case you want to access serv...

Page 68 - following table for a description of each setting item.; Up arrow

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ8VHU,QWHUIDFH6HWWLQJV 58 2. Click drop-down menus, tick/untick checkboxes, or move sliders to choose desired settings. Refer to the following table for a description of each setting item. Keyboard Item Description Use Custom Keyboard Settings Check/Unch...

Page 69 - If; On resume, password protect

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ8VHU,QWHUIDFH6HWWLQJV 4.3.7 Configuring Screensaver Settings To configure screensaver settings for your SC-T35, please do the following: 1. On ViewSonic Client Setup, click User Interface > Screensaver . 2. Click drop-down menus or tick/untick checkb...

Page 70 - Configuring External Device Settings; Devices; Devices Tab Overview

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ([WHUQDO'HYLFH6HWWLQJV 60 4.4 Configuring External Device Settings 4.4.1 Devices Tab Overview Devices tab enables you to configure settings for external devices of clients. To access available settings of Devices tab, click the tab on ViewSonic Client S...

Page 71 - Configuring Settings for USB Storage Devices; Tick/untick the checkboxes to choose the desired settings.

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ([WHUQDO'HYLFH6HWWLQJV 61 4.4.2 Available Settings at a Glance Tab Setting Icon Description Section Page Devices USB Storage &OLFNWRFRQ¿JXUHVHWWLQJVIRU86%VWRUDJHGHYLFHV 4.4.3 4.4.4 61 62 Audio &OLFNWRFRQ¿JXUHVHWWLQJVIRUDXGLRGHYLFHV 4.4.5 63 Prin...

Page 72 - to save your change.; For your changes to take effect, you need to restart your system.; Manually Mount and Unmount Attached USB Storage Devices; Enable Automount; is checked (see section “4.4.3 Configuring Settings for USB; Right click the desktop icon of the attached USB storage device.; Mount Volume; to mount\unmount the attached USB storage device.

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ([WHUQDO'HYLFH6HWWLQJV 62 6HWWLQJVIRU86%6WRUDJH'HYLFHV Item Description Enable USB Storage Tick/Untick this checkbox to allow/disallow the access of USB storage devices. NOTE: To use the locally attached USB storage devices in an RDP / ICA / View sessio...

Page 73 - Disabling or Enabling Attached Audio Devices; To disable/enable attached audio devices, please do the following:; Audio; to confirm your selection.

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ([WHUQDO'HYLFH6HWWLQJV 4.4.5 Disabling or Enabling Attached Audio Devices To disable/enable attached audio devices, please do the following: NOTE t If you disable locally attached audio devices, client users are not allowed to perform audio playback or ...

Page 74 - on the top of the Printer list.

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ([WHUQDO'HYLFH6HWWLQJV 64 4.4.6 Adding a Local Printer To add a local printer for your SC-T35, please do the following: 1. Connect the desired printer to your SC-T35 and turn on the printer. 2. On ViewSonic Client Setup, click Devices > Printer . 3. ...

Page 75 - filled out in the field.; attached local printer.

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ([WHUQDO'HYLFH6HWWLQJV 65 8. A field for the selected printer appears and the printer URI (Uniform Resource Identifier) data is automatically filled out in the field. NOTE t A URI (Uniform Resource Identifier) is a sequence of characters that is used to...

Page 78 - Configuring Network Settings; Network; the tab on ViewSonic Client Setup.; Network Tab Overview

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ1HWZRUN6HWWLQJV 68 4.5 Configuring Network Settings 4.5.1 Network Tab Overview Network tab enables you to configure network settings for clients. To access available settings of Network tab, click the tab on ViewSonic Client Setup. Interface Elements No...

Page 79 - Configuring Wired Network Settings; Using a Dynamic IP Address; DHCP; address to your SC-T35 thin client. This is the default setting.; Using a Static IP Address

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ1HWZRUN6HWWLQJV 4.5.2 Available Settings at a Glance Tab Setting Icon Description Section Page Network Ethernet &OLFNWRFRQ¿JXUHZLUHGQHWZRUNVHWWLQJV 4.5.3 69 Hosts Click to create the mapping of IP addresses to the names of host servers. You can then...

Page 80 - The red asterisks indicate the required fields.

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ1HWZRUN6HWWLQJV 70 3. The IP address, Subnet mask, and Gateway fields appear in the IP address section. 4. Type in the IP address, subnet mask, and gateway for your SC-T35 thin client. NOTE t Consult your network administrator for a free IP address and ...

Page 81 - Obtaining DNS Server Addresses Automatically; Manual setting; or

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ1HWZRUN6HWWLQJV 71 Obtaining DNS Server Addresses Automatically To obtain DNS Server addresses automatically, please do the following: NOTE t You cannot obtain DNS server addresses automatically through the DHCP server if you choose not to get the IP ad...

Page 82 - Creating the Mapping of IP Addresses to Names of Host Servers; Creating the Mapping List; to open the Mapping list.

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ1HWZRUN6HWWLQJV 72 NOTE t Specifying a domain name in the Search Domain field will enable your system to discover a computer in that domain simply with its computer name rather than its FQDN (Fully Qualified Domain Name). 5. Click Save to apply. 4.5.4 C...

Page 83 - full; Managing the Mapping List

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ1HWZRUN6HWWLQJV NOTE t If your host server belongs to a domain, please don’t enter the FQDN (Fully Qualified Domain Name) or full computer name in the Hostname field. Enter only the computer name of the host server in this required field. 4. The newly a...

Page 84 - Establishing and Stopping a Wireless Connection; Wireless; setting also allows you to configure and manage wireless network; Establishing a Wireless Network Connection; to open the Wireless Network list.; Click to check the desired wireless network. The Connect

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ1HWZRUN6HWWLQJV 74 4.5.5 Establishing and Stopping a Wireless Connection The Wireless setting enables you to establish/stop a wireless connection for your SC-T35 thin client. NOTE t Before you can access available wireless networks, you need to install ...

Page 85 - A window appears prompting for confirmation or authentication.; Type in the required password, and then click; to confirm the establishment; connected

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ1HWZRUN6HWWLQJV 75 3. Click Connect to create a wireless network connection through the selected wireless network. 4. A window appears prompting for confirmation or authentication. NOTE t If you ever accessed this wireless network before, the password w...

Page 86 - Stopping a Wireless Network Connection

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ1HWZRUN6HWWLQJV 76 Stopping a Wireless Network Connection To stop a wireless network connection, please do the following: 1. On ViewSonic Client Setup, click Network > Wireless to open the Wireless Network list. 2. Click to check the desired wireless...

Page 87 - Configuring Wireless Network Settings; Adjusting Connection settings for a Wireless Network; and; IPV4 Settings; . For instructions on how; General; Configuring General Settings for Wireless Network Connections; Connections; tab will be listed on the drop-down menu.

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ1HWZRUN6HWWLQJV 77 4.5.6 Configuring Wireless Network Settings Adjusting Connection settings for a Wireless Network To adjust connection settings for a wireless network, please do the following: 1. On ViewSonic Client Setup, click Network > Wireless ...

Page 88 - Configuring Service Access Settings; Applications Tab Overview

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV 78 4.6 Configuring Service Access Settings 4.6.1 Applications Tab Overview Applications tab enables you to configure settings for service access on clients. To access available settings of Applications tab, click the tab on ViewSon...

Page 90 - Configuring Basic RDP Connection Settings; The RDP Connection list appears in the Configuration area.

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV 80 4.6.3 Configuring Basic RDP Connection Settings The Remote Desktop setting allows you to configure RDP (Remote Desktop Protocol) connection settings and create shortcuts on the local desktop and START menu for service access. Yo...

Page 92 - In the Server Settings section, click; corresponding fields automatically.; to add this RDP connection entry.

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV 82 NOTE t To create an entry of RDP connection settings for MultiPoint™ Remote Desktop sessions, please do the following: 1. In the Server Settings section, click to start discovering MultiPoint™ Server systems over your network. 2...

Page 93 - Configuring Advanced RDP Connection Settings; Example: Windows MultiPoint Server 2011

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV 4.6.4 Accessing Remote Desktop Services To access Remote Desktop services, please do the following: 1. Double click the created shortcut on the desktop. 2. Follow the on-screen instructions and provide required credentials if neede...

Page 95 - Application

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV 85 On Application Exit Select what to do when a Remote Desktop session is ended. Four options are available: Do Nothing, Restart Application, Reboot, and Shutdown. Option Description Do Nothing Returns to the SC-T35 local Linux des...

Page 96 - The default for an RDP connection is enabled.

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV 86 Resolution Click the drop-down menu to select the desired display resolution on a Remote Desktop session. Four options are available: Fullscreen, Large Window, Medium Window, and Small Window. Option Description Fullscreen Opens...

Page 99 - Configuring ICA Connection Settings; Citrix ICA; or Citrix Knowledge Center at; Four connection types are available:

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV 4.6.6 Configuring ICA Connection Settings The Citrix ICA setting allows you to configure ICA connections for Citrix services and create shortcuts on the local desktop and START menu for service access. You can access virtual deskto...

Page 100 - Connection Type: Web Logon

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV Connection Type: Web Logon To quickly configure ICA connection settings for the Web Logon connection type, please do the following: 1. On ViewSonic Client Setup, click Applications > Citrix ICA . 2. The available ICA Connection ...

Page 101 - as default, and then type in the desired; desktop and START menu.

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV 4. On General sub-tab, leave the connection type as Web Logon as default, and then type in the desired session name and the IP address / URL / FQDN of the server where the Citrix Web Interface is hosted under the Server Settings se...

Page 102 - Connection Type: XenDesktop; sub-tab, click the Connection Type drop-down menu to select

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV Connection Type: XenDesktop To quickly configure ICA connection settings for the connection of XenDesktop type, please do the following: 1. On ViewSonic Client Setup, click Applications > Citrix ICA . 2. The available ICA Connec...

Page 103 - to discover available; drop-down menu to select the desired desktop group, and then click

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV 5. Type the session name, IP address / URL / FQDN of the server where the Citrix Web Interface for XenDesktop is hosted, user credentials, the domain of the server, and then click the Search icon to discover available desktop group...

Page 104 - Connection Type: XenApp

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV Connection Type: XenApp To quickly configure ICA connection settings for the connection of XenApp type, please do the following: 1. On ViewSonic Client Setup, click Applications > Citrix ICA . 2. The available ICA Connection lis...

Page 105 - menu to select the desired application, and then click

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV 5. Type the session name, the IP address / URL / FQDN of the XenApp server, user credentials, the domain of the server, and then click the Search icon to discover available applications. NOTE t If your XenApp server doesn’t belong ...

Page 106 - Connection Type: Server Connection

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV Connection Type: Server Connection To quickly configure ICA connection settings for the connection type of Server Connection, please do the following: 1. On ViewSonic Client Setup, click Applications > Citrix ICA . 2. The availa...

Page 108 - Accessing Citrix Services Directly; To access Citrix services directly, please do the following:; Accessing Citrix Services through the Web Browser; The Web browser is launched in; Citrix Logon Screen Example: XenApp 6.0 Fundamentals

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV 4.6.7 Accessing Citrix Services Accessing Citrix Services Directly To access Citrix services directly, please do the following: 1. Double click the created (customized) shortcut on the desktop. 2. The desired desktop or application...

Page 109 - Type in the required credentials, and then click; Citrix Logon Screen Example: XenDesktop 5.6 Platinum

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV 3. Type in the required credentials, and then click Log On . NOTE t If your XenApp server doesn’t belong to any domain, type in the server name in the Domain field instead. Citrix Logon Screen Example: XenDesktop 5.6 Platinum Citri...

Page 110 - Selection Screen Example: XenDesktop 5.6 Platinum

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV 100 4. On the Desktop or Application Selection screen, click to select the desired desktop or application(s). NOTE t You might enter the virtual desktop directly if only one type of virtual desktop is assigned to the provided crede...

Page 111 - PowerPoint Viewer, Adobe Reader, and Notepad; Virtual Desktop Example: Windows 7 Ultimate

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV 101 5. The selected virtual desktop or application(s) will be displayed on the screen. Virtual Application Examples PowerPoint Viewer, Adobe Reader, and Notepad Virtual Desktop Example: Windows 7 Ultimate

Page 112 - Configuring Advanced ICA Connection Settings; Settings for the Connection Type of Web Logon

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV 102 4.6.8 Configuring Advanced ICA Connection Settings The table below provides a description of each setting item for ICA connections. Please refer to this table to configure advanced settings and customize shortcuts on the local ...

Page 113 - No options are available under the; sub-tab in the connection type of

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV Common Settings Item Description Autostart When Startup Select whether to open a browser session for Citrix service access automatically or not when your SC-T35 is started up (Autostart mode). NOTE: There are three similar but diff...

Page 114 - Settings for the Connection Type of XenDesktop

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV 104 Settings for the Connection Type of XenDesktop NOTE t For descriptions of available settings for the connection type of Web Logon, please refer to “Settings for the Connection Type of Web Logon” on page 102. t For descriptions ...

Page 118 - Settings for the Connection Type of XenApp

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV 108 Settings for the Connection Type of XenApp NOTE t For descriptions of available settings for the connection type of Web Logon, please refer to “Settings for the Connection Type of Web Logon” on page 102. t For descriptions of a...

Page 122 - Settings for the Connection Type of Server Connection

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV 112 Settings for the Connection Type of Server Connection NOTE t For descriptions of available settings for the connection type of Web Logon, please refer to “Settings for the Connection Type of Web Logon” on page 102. t For descri...

Page 126 - Configuring VMware View Connection Settings

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV 116 4.6.9 Configuring VMware View Connection Settings The VMware View setting enables you to configure View connection settings for VMware View desktop services and create shortcuts on the local desktop and START menu for service a...

Page 127 - then click; on the local desktop and START menu.

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV 117 4. Type in the desired session name and the computer name or IP address of the View Connection Server, and then click Save to confirm. NOTE t These are the only required fields for the creation of a service access shortcut on t...

Page 128 - Importing a Security Certificate through a USB Storage Device; Copy the PEM format certificate to a USB storage device.

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV 118 4.6.10 Importing Security Certificates of View Connection Servers You can import security certificates of View Connection Servers for your SC-T35. With a certificate from a trusted certificate authority, your SC-T35 could verif...

Page 129 - to see more information on the imported certificate.; Importing the Certificate from a View Connection Server; as the import source of your certificate.

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV 7. Click Import to start importing. 8. Upon completion, the imported certificate is listed in Certificates section. 9. You can click Detail to see more information on the imported certificate. 10. Click Close to exit. Importing the...

Page 130 - Detail; Close

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV 120 5. Upon completion, the imported certificate is listed in Certificates section. 6. You can click Detail to see more information on the imported certificate. 7. Click Close to exit.

Page 131 - Connect Insecurely; A Welcome window might appear. Click; down menu to select the domain, and then click

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV 121 4.6.11 Accessing VMware View Services To access VMware View services, please do the following: 1. Double click the created (customized) access shortcut on the desktop. 2. On the appeared View Client window, type in the computer...

Page 132 - Full Screen - All Monitors; Double click to select the desired desktop.

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV 122 5. A window appears with available desktops for the provided credentials. NOTE t You can click the Screen Size drop-down menu of a virtual desktop group to select the desired screen size. Five options are available: Full Screen...

Page 133 - 2 Configuring Advanced View Connection Settings

&RQ¿JXULQJ&OLHQW6HWWLQJV &RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV 4.6.12 Configuring Advanced View Connection Settings The table below provides a description of each setting item for View connections. Please refer to this table to configure advanced settings and customize shortcuts on the local d...

Page 136 - Appendices

126 Appendices This chapter provides instructions for the maintenance and upgrade of your SC-T35 thin clients. A.1 Resetting Your SC-T35 to the Factory DefaultResetting Your SC-T35 to the Factory Default How to restore factory default settings for your SC-T35 127 A.2 SC-T35 Updating Firmware with a ...

Page 137 - A.1 Resetting Your SC-T35 to the Factory Default; Six options are available on ViewSonic Thin Client Menu:; Reset Mode

127 A.1 Resetting Your SC-T35 to the Factory Default To reset your SC-T35 to the factory default, please do the following: WARNING t Resetting your SC-T35 to the factory default will erase all current settings in ViewSonic Client Setup and restore all settings to defaults. 1. In Power-off state (the...

Page 138 - A.2 SC-T35 Updating Firmware with a USB Flash Drive; The System Information window appears.; Step 1: Prepare the USB Flash Drive for Firmware Update; firmware; The name of the folder

128 A.2 SC-T35 Updating Firmware with a USB Flash Drive A simple picture of how to update the firmware for your SC-T35 thin client can be given by two main steps: Step 1: Prepare a USB flash drive for firmware update Step 2: Update the firmware of your SC-T35 NOTE t Please contact us to get the up-t...

Page 139 - Step 2: Update the Frimware of your SC-T35 Thin Client; VGA; Use arrow keys on the keyboard to select

Step 2: Update the Frimware of your SC-T35 Thin Client To update firmware for your SC-T35 thin client, please do the following: 1. In the Power-off state (the Power LED is off ), plug your USB flash drive into a USB port on the front panel of your SC-T35, and ensure that you have made power connecti...

Page 141 - The Scenario where Applicable; the later; to open the Client Setup console.; to create a new entry of

A.3 Configuration for an RD Gateway and Management for Certificates — Newly Added Features in SC-T35 thin clients with the firmware version 2.53-PREE or the Later The Scenario where Applicable This document provides important information for SC-T35 thin clients with the firmware version 2.53-PREE or...

Page 142 - The default is disabled.; RD Gateway; Refer to the above table to configure the settings, and then click; Importing Certificates for Remote Computers; Importing certificates through a USB storage device

132 3. Click RD Gateway sub-tab to configure settings for an RDP connection through an RD Gateway server. The default is disabled. RD Gateway Sub-tab Connection Settings Item Description Use RD Gateway server Check/Uncheck to enable/disable the use of an RD Gateway server. When checked, the followin...

Page 146 - A.4 Configuration for RD Gateway and Power Saving; Bypass RD Gateway for local address; is enabled by default.

136 A.4 Configuration for RD Gateway and Power Saving — Newly added features in SC-T35 thin clients with the firmware version 2.54-PREF or the Later The Scenario where Applicable This document provides important information for SC-T35 thin clients with the firmware version 2.54-PREF or the later , a...

Page 147 - The Display Sleep mode is disabled by default.

137 Configuring Settings for Display Sleep Mode Configuring settings for Display Sleep mode is now added to the Client Setup console.To configure settings for this mode, please do the following: 1. On the default Quick Connection screen, click Setup to open the Client Setup console. 2. On the Client...

Page 148 - Specifications; ViewSonic SC-T35 thin client; x DC IN

138 Specifications ViewSonic SC-T35 thin client Processor TI ARM 1.0 GHz Random Access Memory 1 GB Flash Memory 512 MB Resolutions Up to 1920 x 1080(Only support 1920 x 1200 resolution monitors with a pixel clock frequency less than 165 MHz) I/O interfaces Front:2 x USB 2.0 1 x Microphone 1 x Headph...

Page 149 - Other Information; Customer Support; You will need the product serial number.; Website

139 Other Information Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/Region Website T = TelephoneF = FAX Email Australia/New Zealand www.viewsonic.com.au AUS= 1800 880 818NZ= 0800 008 822...

Page 150 - Limited Warranty; ViewSonic; What the warranty covers:; KLVZDUUDQW\LVYDOLGRQO\IRUWKH¿UVWFRQVXPHUSXUFKDVHU; What the warranty does not cover:; b. Any damage of the product due to shipment.; Limitation of implied warranties:

140 Limited Warranty ViewSonic ® Thin Client What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sol...

Page 151 - Exclusion of damages:; Any claim against the customer by any other party.

141 Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based upon inconvenience, ORVVRIXVHRIWKHSURGXFWORVVRIWLPHORVVRISUR¿WVORVVRIEXVL...