ViewSonic PJD6220 - Manuals

Page 2 - ViewSonic; Compliance Information; FCC Statement; • Consult the dealer or an experienced radio/TV technician for help.; For Canada

ViewSonic i PJD6220/PJD6230/PJD6240 Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including inte...

Page 3 - Important Safety Instructions; further instructions.

ViewSonic ii PJD6220/PJD6230/PJD6240 Important Safety Instructions 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this unit near water.6. Clean with a soft, dry cloth. If still not clean, see “Cleaning the Display” in this guide fo...

Page 4 - Declaration of RoHS Compliance; Substance; specifically mentioned in the Annex of RoHS Directive.

ViewSonic iii PJD6220/PJD6230/PJD6240 Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (Ro...

Page 5 - Copyright Information; Copyright; Product Registration; For Your Records

ViewSonic iv PJD6220/PJD6230/PJD6240 Copyright Information Copyright © ViewSonic © Corporation, 2008. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc.Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in t...

Page 6 - Notes on the AC Power Cord

ViewSonic v PJD6220/PJD6230/PJD6240 Notes on the AC Power Cord AC Power Cord must meet the requirement of countries where you use this projector.Please confirm your AC plug type with the graphics below and ensure that the properAC Power Cord is used. If the supplied AC Power Cord does not match your...

Page 7 - CONTENTS

CONTENTS ViewSonic PJD6220/PJD6230/PJD6240 Introduction ................................................................................... 1 Projector Features........................................................................................................ 1Package Contents ....................

Page 8 - Introduction; Projector Features

ViewSonic 1 PJD6220/PJD6230/PJD6240 Introduction Projector Features The projector integrates high-performance optical engine projection and a user - friendlydesign to deliver high reliability and ease of use.The projector offers the following features: Single chip 0.55" Texas Instruments DLP ®...

Page 9 - Package Contents

ViewSonic 2 PJD6220/PJD6230/PJD6240 Package Contents When you unpack the projector, make sure you have all these components: Projector with Lens Cap AC Power Cord VGA Cable (D-SUB to D-SUB) Composite Video Cable S-Video Cable Remote Control (IR) AAA size batteries for remote control User’s Manual Qu...

Page 10 - Projector Overview; Front View

ViewSonic 3 PJD6220/PJD6230/PJD6240 Projector Overview Front View Lens cap AC power socket Elevator button Speaker Lens cap strap Control panel Projection lens Zoom ring Front IR remote control sensor Focus ring Ventilation holes Lamp cover 1 7 2 8 3 9 4 10 5 11 6 12 1 2 4 5 6 3 7 9 10 8 11 12

Page 11 - Rear View; Bottom View

ViewSonic 4 PJD6220/PJD6230/PJD6240 Rear View Connection ports Kensington lockRear IR remote control sensorVentilation holes Bottom View Elevator foot Ceiling mount (M4 x L7.5mm)Tilt-adjustment foot 1 3 2 4 1 2 3 4 1 2 3 1 2 3 This projector can be used with a ceiling mount for support. The ceilin...

Page 12 - Using the Product; Control Panel; LED

ViewSonic 5 PJD6220/PJD6230/PJD6240 Using the Product Control Panel LED Button Function Lamp (Lamp LED indicator) Refer to “LED Indicator Messages”. Temp (Temperature LED indicator) Refer to “LED Indicator Messages”. Four directional buttons Use four directional buttons to select items or make adjus...

Page 13 - Connection Ports

ViewSonic 6 PJD6220/PJD6230/PJD6240 Connection Ports LAN For network control. Audio Out Connect to a speaker or other audio input equipment. Computer Out Connect to a computer display, etc. Audio In Connect an audio output from video equipment to this jack. Computer In Connect image input signal (an...

Page 14 - Remote Control

ViewSonic 7 PJD6220/PJD6230/PJD6240 Remote Control Power Turn the projector on or off. Four directional buttons -Use four directional buttons toselect items or make adjustmentsto your selection.- The right button acts as Blank Screen function. Cut off the screen temporarily. Press again to cancel th...

Page 15 - Installing the Batteries

ViewSonic 8 PJD6220/PJD6230/PJD6240 Installing the Batteries 1. Open the battery cover in the direction shown. 2. Install batteries as indicated by the diagramInside the compartment. 3. Close the battery cover into position. Keep the batteries out of the reach of children. There is a danger of dea...

Page 16 - Remote Control Operation

ViewSonic 9 PJD6220/PJD6230/PJD6240 Remote Control Operation Point the remote control at the infrared remote sensor and press a button. Operating the projector from the front Operating the projector from the rear 10 15 7m 5m 5m 10 15 7m 5m 5m Do not point the laser pointer directly to the peop...

Page 17 - Installation; Connecting the Projector

ViewSonic 10 PJD6220/PJD6230/PJD6240 Installation Connecting the Projector VGA Cable (D-Sub to D-Sub) VGA (D-Sub) to HDTV (RCA) Cable Audio Cable S-Video Cable RS-232 Cable Composite Video Cable USB Cable Internet Cable 1 5 2 6 3 7 4 8 Desktop type Laptop type 4 1 1 1 2 7 3 6 5 2 5 8 When connecti...

Page 18 - Powering On/Off the Projector; Powering On the Projector:; Powering Off the Projector:

ViewSonic 11 PJD6220/PJD6230/PJD6240 Powering On/Off the Projector Powering On the Projector: 1. Remove the projector lens cap. 2. Complete the AC power cord and peripheral signal cable(s) connections. 3. Press button to turn on the projector. The projector takes a minute or so to warm up. 4. Turn o...

Page 19 - Adjusting the Projector; Adjusting the Projector Height

ViewSonic 12 PJD6220/PJD6230/PJD6240 Adjusting the Projector Adjusting the Projector Height The projector is equipped with an elevator foot to adjust the image height.To raise or lower the image: 1. To raise or lower the image, press the elevator button and raise or lower the frontof the projector. ...

Page 20 - Adjusting Projection Image Size

ViewSonic 13 PJD6220/PJD6230/PJD6240 Adjusting Projection Image Size Refer to the graphic and table below to determine the screen size and projection distance. Projection Distance (meters) Screen Size (for 4:3 aspect ratio diagonal length) Wide (inches) Tele (inches) 1.2 30.08 27.34 2 49.96 45.57 3 ...

Page 21 - Menu Operation

ViewSonic 14 PJD6220/PJD6230/PJD6240 Menu Operation The projector has multilingual on-screen display menus that allow you to make imageadjustments and change a variety of settings.

Page 22 - How to operate

ViewSonic 15 PJD6220/PJD6230/PJD6240 How to operate 1. Press the Menu button on the control panel or the MENU button on the remote control to open the OSD menu. 2. When OSD is displayed, use S / T to select any feature in the main menu. 3. After selecting the desired main menu feature, press X to en...

Page 25 - Network Config

ViewSonic 18 PJD6220/PJD6230/PJD6240 Network Control Select either RS232 or LAN for network control. If RS232 is selected, user will not ableto control the projector via LAN network and vice versa. Network Config DHCP Enable: Assign an IP address to the projector from the DHCP server automatically...

Page 26 - There are two ways to connect to the network control:; into the address bar of the; Start > Control Panel > Network Connection; and right click to

ViewSonic 19 PJD6220/PJD6230/PJD6240 Network Control This feature provides the ability to remotely control and manage the projector through the network. Note: 1024x768 viewing resolution is recommended. Preparation: 1. Connect one end of the internet cable to the LAN connector on projector.2. Connec...

Page 27 - and click; “Properties”; Set your IP address on your computer, and click; “Use the following IP address”; (set the last number different to the projector IP address).

ViewSonic 20 PJD6220/PJD6230/PJD6240 2. Select “Intel Protocol (TCP/IP)” and click “Properties” . 3. Set your IP address on your computer, and click OK. ● Click “Use the following IP address” ● IP address: 10.0.50.105, (set the last number different to the projector IP address). ● Subnet mask: 255.2...

Page 28 - Authority on the network control of Administrator & User:; configuration settings.

ViewSonic 21 PJD6220/PJD6230/PJD6240 4. Enter “http://10.0.50.100/” into the address bar of the web browser and press “Enter” key or click “Go” button. 5. After the connection is completed, the control screen will be as below Authority on the network control of Administrator & User: Item Descrip...

Page 29 - Login; Enter; If the Administrative & User password is enabled; Select your User Name and enter password to login.

ViewSonic 22 PJD6220/PJD6230/PJD6240 Login Enter “http://10.0.50.100/” into the address bar of the web browser and press “Enter” key or click “Go” button.If the administrative and user password is disabled, it will directly go into the Status page. If the Administrative & User password is enable...

Page 30 - Item; Show filter used hours on current projector.

ViewSonic 23 PJD6220/PJD6230/PJD6240 Status Information: All screen images in this manual are shown when you login with the Administrator ID. The image will differ if you login with User ID. Item Description IP Address Show current IP address. Group Name Show group name. Projector Name Show projecto...

Page 32 - Video Image; Enable or disable filter mode.

ViewSonic 25 PJD6220/PJD6230/PJD6240 Video Image Color Adjusts the color setting. Tint Adjusts the tint setting. Sharpness Adjusts the sharpness setting. Audio Volume Adjusts the volume setting. Mute Enable or disable the mute function. Setting Menu Position Adjusts the menu position. Projection Sel...

Page 33 - Network; Confirm Password

ViewSonic 26 PJD6220/PJD6230/PJD6240 Network Item Description Network DHCP Assign an IP address to the projector from the DHCP server automatically. Manual Assign an IP address manually. IP Address Setup IP address when DHCP is disable. Subnet Mask Setup subnet mask when DHCP is disable. Gateway Set...

Page 34 - Alert Setting; Email Setting

ViewSonic 27 PJD6220/PJD6230/PJD6240 Alert Setting Item Description Email Setting To Setup the mail alert attendee. (Max length: 40 characters) Cc Setup the backup mail alert attendee. (Max length: 40 characters) Subject Setup the subject of the alert e-mail. (Max length: 30 characters) From Setup t...

Page 35 - Schedule; defines the date of each week will execute the command

ViewSonic 28 PJD6220/PJD6230/PJD6240 Schedule The schedule function is divided into two scheduling categories, as shown below: Weekly Schedule: defines the date of each week will execute the command Click “Submit” button to create new schedule. To delete schedule, click “Cancel”. Specific Day: defin...

Page 37 - Maintenance; Cleaning the Lens

ViewSonic 30 PJD6220/PJD6230/PJD6240 Maintenance The projector needs proper maintenance. You should keep the lens clean as dust, dirtor spots will project on the screen and diminish image quality. If any other parts needreplacing, contact your dealer or qualified service personnel. When cleaning any...

Page 38 - Replacing the Lamp

ViewSonic 31 PJD6220/PJD6230/PJD6240 Replacing the Lamp As the projector operates over time, the brightness of the projector lamp graduallydecreases and the lamp becomes more susceptible to breakage. We recommendreplacing the lamp if a warning message is displayed. Do not attempt to replace thelamp ...

Page 40 - Specifications

Specifications Display Type Single 0.55" DLP panel Resolution (Pixels) XGA (1024 × 768) Lens Manual Zoom (1.1x) Screen Size 30” – 250” Lamp PJD6220: 180W; PJD6230: 200W; PJD6240: 260W Input / Output Source D-Sub 15 pin, S-video, composite video, USB, RS-232, Audio In, Audio Out, LAN (RJ-45 conne...

Page 41 - Appendix; LED Indicator Messages

ViewSonic 34 PJD6220/PJD6230/PJD6240 Appendix LED Indicator Messages LED Type Color Status Meaning LAMP LEDTEMP LED Green Off Flash - The projector is in standby mode. LAMP LEDTEMP LED GreenGreen Solid Flash The projector system has some problems withits fan, so the projector cannot start up. LAMP L...

Page 42 - RS-232 Command and Configuration; RS232 Serial Remote Control Command

ViewSonic 35 PJD6220/PJD6230/PJD6240 RS-232 Command and Configuration RS232 Serial Remote Control Command Item Description Comment Baud Rate 19200 Parity Bit none Data Bit 8 Stop Bit 1 Assign Port COM1 Power On Command Send String BE, EF, 10, 05, 00, C6, FF, 11, 11, 01, 00, 01, 00 Response 06 Commen...

Page 43 - Blank Screen

ViewSonic 36 PJD6220/PJD6230/PJD6240 Down (for OSD) Command Send String BE, EF, 02, 06, 00, 0B, D2, 32, 00, 00, 00, 00, 00 Response 06 Comment Left (for OSD) Command Send String BE, EF, 02, 06, 00, DA, D3, 33, 00, 00, 00, 00, 00 Response 06 Comment Right (for OSD) Command Send String BE, EF, 02, 06,...

Page 45 - Firmware Version

ViewSonic 38 PJD6220/PJD6230/PJD6240 Firmware Version Command Send String BE, EF, 03, 06, 00, D5, D9, 70, 00, 00, 00, 00, 00 Response Version Comment System Status Command Send String BE, EF, 03, 06, 00, 04, D8, 71, 00, 00, 00, 00, 00 Response 03 :Projector ON (Normal Mode) Comment Volume Command Se...

Page 46 - Composite Video

ViewSonic 39 PJD6220/PJD6230/PJD6240 Change to S-Video Channel Command Send String BE, EF, 03, 19, 00, E8, 69, 01, 47, 02, CC, CC, 00 Response 06 Comment Change to Composite Video Channel Command Send String BE, EF, 03, 19, 00, 78, A8, 01, 47, 02, CC, CC, 00 Response 06 Comment Change to HDTV(Y-Pb-P...

Page 47 - Compatibility Modes

ViewSonic 40 PJD6220/PJD6230/PJD6240 Compatibility Modes Computer: Video: Compatibility Resolution H-Sync [KHz] V-Sync [Hz] VGA 640 x 480 31.5 59.9 37.9 72.8 37.5 75.0 43.3 85.0 SVGA 800 x 600 35.2 56.3 37.9 60.3 48.1 72.2 46.9 75.0 53.7 85.1 XGA 1024 x 768 48.4 60.0 56.5 70.1 60.0 75.0 68.7 85.0 SX...

Page 48 - Troubleshooting; Image problems; Remote control problems

ViewSonic 41 PJD6220/PJD6230/PJD6240 Troubleshooting Refer to the symptoms and measures listed below before sending the projectorforrepairs. If the problem persists, contact your local reseller or service center. Pleaserefer to "Indicator Messages" as well. Start-up problems If no lights tur...

Page 49 - Customer Support; You will need the product serial number.; Web Site

ViewSonic 42 PJD6220/PJD6230/PJD6240 Customer Support For technical support or product service, see the table below or contact your reseller. Note : You will need the product serial number. Country/Region Web Site T=TelephoneF=Fax E-mail Australia/New Zealand www.viewsonic.com.au AUS=1800 880 818NZ=...

Page 50 - Limited Warranty; VIEWSONIC; What the warranty covers:; North and South America:; Who the warranty protects:; This warranty is valid only for the first consumer purchaser.; What the warranty does not cover:; Use of supplies or parts not meeting ViewSonic’s specifications.

ViewSonic 43 PJD6220/PJD6230/PJD6240 Limited Warranty VIEWSONIC ® PROJECTOR What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship duri...

Page 51 - Limitation of implied warranties:; shall not be liable for:; Effect of state law:; Canada, contact ViewSonic or your local ViewSonic dealer.

ViewSonic 44 PJD6220/PJD6230/PJD6240 Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose. Exclusion of damages: ViewSonic’s liability...

Page 52 - Mexico Limited Warranty

ViewSonic 45 PJD6220/PJD6230/PJD6240 Mexico Limited Warranty VIEWSONIC ® PROJECTOR What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmansh...