ViewSonic PJ650 - Manuals

3 ViewSonic PJ650 Component Names Projector MENU button RESET button KEYSTONE button INPUT button STANDBY/ON button Zoom knob Focus ring Air filter Elevator button Remote sensor Lens cap AUDIO IN R and L ports VIDEO IN port S-VIDEO IN port RGB IN 1 and 2 ports AC power inlet Elevator button Power sw...

ViewSonic PJ650 4 Remote Control REMOTE CONTROL DEVICE SEARCH button STANDBY/ON button AUTO button BLANK button VOLUME button MUTE button KEYSTONE button MENU button RESET button ENTER button ESC button , , , Cursor buttons POSITION button KEYBOARD buttons FREEZE button MAGNIFY buttons ASPECT button...

5 ViewSonic PJ650 Using the remote control Putting batteries into the remote control unit CAUTION Precautions to observe in regards to the batteries Always handle the batteries with care and use them only as directed. Improper use may result in battery cracking or leakage, which could result in fire...

ViewSonic PJ650 6 Setting up the projector CAUTION • Install the projector in a suitable environment according to instructions of the accompanying manual “PJ650 Quick START GUIDE” and this manual. • If you press the elevator buttons without holding the projector, the projector might crash down, over...

7 ViewSonic PJ650 Adjusting the Screen Size and Projection Distance Refer to the illustrations and tables below to determine the screen size and projection distance.The values shown in the table are calculated for a full size screen (1024x768 pixels). a: Distance from the projector to the screen (±1...

ViewSonic PJ650 8 Ports and Cables Refer to this table to determine which projector port and cable to use for connecting to a given device. Use this table for determining which cables to prepare. NOTE: About Plug-and-Play Capability• This projector is compatible with VESA DDC 1/2B. Plug-and-Play can...

9 ViewSonic PJ650 SetUp Reminders WARNING: Precautions to observe in regards to the power cord: Please use extra caution when connecting the projector's power cord as incorrect or faulty connections may result in FIRE AND/OR ELECTRICAL SHOCK. Please adhere to the following safety guidelines to insur...

ViewSonic PJ650 10 Connecting your devices Devices You Can Connect to the Projector (Refer to this section for planning your device configuration to use for your presentation.) CAUTION • Incorrect connecting could result in fire or electrical shock. Please read this manual and the separate “PJ650 Qu...

11 ViewSonic PJ650 Connecting to a Computer ATTENTION: Whenever attempting to connect a laptop computer to the projector, be sure to activate the laptop's RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer t...

ViewSonic PJ650 12 Connecting to a DVD Player or VCR

13 ViewSonic PJ650 Connecting to a Display Monitor RGB OUT RGB cable Display monitor RGB IN

ViewSonic PJ650 14 Turning On The Power Precautions Connect all devices to be used to the projector prior to turning on the power. WARNING: When the power is ON, a strong light is emitted. Do not look into the lens. 1 Make sure that the power cord is firmly and correctly connected to the projector a...

15 ViewSonic PJ650 Turning Off The Power 1 Press the STANDBY/ON button (control panel or remote control) The message "Power off?" will appear on the screen for approximately 5 seconds. 2 Press the STANDBY/ON button again(control panel or remote control) Press the STANDBY/ON button again whil...

ViewSonic PJ650 16 Selecting an Input Signal Using the remote controlIf selecting RGB input Press the RGB button Press this button to toggle between the devices connected to RGB IN 1 and 2. As illustrated below, each time you press the RGB button, the projector switches between RGB IN 1 and 2.Select...

17 ViewSonic PJ650 Adjusting the Volume 1 Press the VOLUME button As illustrated on the right, a dialog box will appear on the screen to aid you in adjusting the volume. 2 Press the , buttons to adjust the volume Press the VOLUME button again to close the dialog box and complete this operation. (Eve...

ViewSonic PJ650 18 Adjusting the Image Position 1 Press the POSITION button As illustrated on the right, a dialog box will appear on the screen to aid you in adjusting the position. 2 Use the , , , buttons to adjust the position When you want to initialize the position, press the RESET button during...

19 ViewSonic PJ650 Using the Automatic Adjustment Feature 1 Press the AUTO button 2 Automatic Adjustment for RGB Input Horizontal position (H. POSIT), vertical position (V. POSIT), clock phase (H. PHASE) and horizontal size (H. SIZE) are automatically adjusted.Make sure that the application window i...

ViewSonic PJ650 20 Correcting Keystrone Distortions 1 Press the KEYSTONE button As illustrated on the right, a dialog box will appear on the screen to aid you in correcting the distortion. 2 Use the , buttons to select the direction of distortion to correct ( ) 3 Use the , buttons to correct the dis...

ViewSonic PJ650 22 Signal Searching 1 Press the SEARCH button When you press the SEARCH button, the projector begins searching for input signals. If it detects an input signal, the search will cease and the projector will project the detected signal. If the projector is unable to find an input signa...

23 ViewSonic PJ650 Using the Menu Functions 1 Press the MENU button The menu display appears on the screen. The projector has the following menus: MAIN, PICTURE 1, PICTURE 2, INPUT, SCREEN, and OPTION.Select a menu using the / buttons. The current settings of the items that can be manipulated via th...

ViewSonic PJ650 24 Operating the PC Screen You can use the remote control as a simplified mouse or keyboard. CAUTION: Mistaken use of the mouse/keyboard control could damage your equipment. • Only connect to a PC.• Before connecting, read the manuals of the device you will connect.• Do not unplug th...

25 ViewSonic PJ650 OSD Menu Function Description This device has 6 separate menus: MAIN, PICTURE 1, PICTURE 2, INPUT, SCREEN and OPTION. Each of these menus is operated using the same methods.The basic operations of these menus are as follows. Main Menu With the MAIN menu, the seven items shown in t...

27 ViewSonic PJ650 Input Menu With the INPUT menu, the four items shown in the Table below can be performed. With inputting of RGB IN 1 and RGB IN 2 signals, the horizontal and vertical frequencies of the signals will be displayed on the initial screen of the INPUT menu.Perform each operation in acc...

ViewSonic PJ650 28 Screen Menu With the SCREEN menu, the five items shown in the Table below can be performed.Please perform each operation in accordance with the instructions in the Table. Item Description BLANK Selection of BLANK Screen: MyScreen ORIGINAL , , , , , The BLANK Screen may be voluntar...

ViewSonic PJ650 30 Option Menu With the OPTION menu, the five items shown in the Table below can be performed.Please perform each operation in accordance with the instructions in the Table. Item Description VOLUME Adjust Volume: High Low AUTO OFF Adjust AUTO OFF Time: Long (MAX. 99 min.) Short (Min....

31 ViewSonic PJ650 Maintenance Lamp To order a new lamp unit (Lamp Part # RLU-150-001), contact ViewSonic or your dealer. For the lamp part number, see the Optional Parts in the Specifications in this guide. For contact information, see the Customer Support table in this guide. Before replacing the ...

33 ViewSonic PJ650 ATTENTION: • Make sure that the screws are screwed in firmly. Loose screws could result in damage or injury.• Do not use with lamp cover removed.• Do not reset the lamp timer without replacing the lamp. NOTE: The LAMP indicator is also red when the lamp unit reaches high temperatu...

35 ViewSonic PJ650 Troubleshooting On-screen Messages When the unit's power is ON, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below. Message Description TO MAXIMIZE PERFORMANCE, LAMP REPLACEMENT IS RECOM- MENDED....

ViewSonic PJ650 36 Panel Lamp Indicators Lighting and flashing of the POWER indicator, the LAMP indicator, and the TEMP indicator have the meanings as described in the Table below.Please respond in accordance with the instructions within the Table. NOTE: When the interior portion has become overheat...

37 ViewSonic PJ650 Problem Diagnostics Before requesting repair, please check the following chart. If the situation cannot be corrected, then contact your dealer. NOTE: When the interior becomes overheated, power to the unit automatically shuts down. Press the main switch on the side of the unit to ...

ViewSonic PJ650 38 Specifications This specifications are subject to change without notice. Outline Dimension Item Specification Product name PJ650 Liquid crys-tal projector Panel size 1.8 cm (0.7 type) Drive system TFT active matrix Pixels 786,432 pixels (1024 horizontal x 768 vertical) Lens Zoom l...

39 ViewSonic PJ650 Customer Support For technical support or product service, see the table below or contact your reseller. When calling ViewSonic Customer Support please have the product's model name and serial number on hand. Country/Region Web site T = TelephoneF = FAX Email United States viewson...

ViewSonic PJ650 40 LIMITED WARRANTY VIEWSONIC PROJECTOR What the warranty covers: ViewSonic ® warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic wil...

41 ViewSonic PJ650 Appendix Power Cord Safety Guidelines Caution: Use a power cable that is properly grounded. Always use an AC power cord that meets your country’s safety standard. AC PLUG CORD PRECAUTIONS FOR THE UNITED KINGDOM FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.IF THE FITTED...

ViewSonic PJ650 42 Compliance Information for U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential install...