ViewSonic ND5000 - Manuals

ViewSonic ND4200/ND5000 2 Two Modes of Operation Standalone The setup allows the ND4200/ND5000 Network Display to act as an independentnetwork device controlled by one server. TAS Managed You can purchase Tivella Administration Server (TAS) separately through Tivella(www.tivella.com or a Tivella dea...

ViewSonic ND4200/ND5000 4 Front View VOLUME decrease VOLUME increase CHANNELUp / Down SELECT items on a menu Remote Control IR Sensor POWER LED POWER ON/OFFStandby/ON

ViewSonic ND4200/ND5000 7 SETTING UP THE NETWORK DISPLAY 1. Connect to a Switch or Router Connect an RJ-45 Ethernet cable from the Network Display to either a switch or a router. See your IT Administrator for a code to the switch or a router. The Router shown is a ViewSonic WMG100. Connect the AC po...

ViewSonic ND4200/ND5000 8 Connect Multiple Network Displays (optional) You can daisy chain several Network Displays together. The two built-in Ethernet ports make the ViewSonic Network Displays unique because you do not need separate network switches or PCs for each Network Display. Media content on...

ViewSonic ND4200/ND5000 9 2. Connect External Speakers (optional) 3. Turn Power On to the Network Display speaker Back of Network Display speaker Power button O (Off) I (On)

ViewSonic ND4200/ND5000 10 Put Batteries in Remote Control Remove the back cover from the remote control as shown below. Put two AA batteries in the remote control. Be sure to match the positive end of the battery with the positive end of the compartment. Put the cover back on the remote control. 4....

ViewSonic ND4200/ND5000 11 MANAGEMENT Startup URLs/Network Configuration The Network Configuration screen allows you to select the video that appears on-screen when you boot up the NMP-500. To go to the Network Configuration screen after logging into the NMP-500, select Management > Startup. The ...

ViewSonic ND4200/ND5000 12 3 In the DHCP field of the Network Configuration screen, tap the down arrow for the pull-down menu and select Enabled to dynamically get network parameters. Make sure there are values in the IP address, Mask, Gateway, and DNS fields although DHCP assigns values to these fi...

ViewSonic ND4200/ND5000 14 VNC client The VNC client configuration screen shown below on the Management menu lets you set the device to start as a VNC client and connect automatically to the VNC server specified. This auto-start feature works only if the VNC client under System services is set to YE...

ViewSonic ND4200/ND5000 15 Video/Audio Configuration This screen is used to adjust the display and audio parameters. Click Management > Video/Audio. The screen shown below appears. 1 In the TV Mode field, click the down arrow for the pull-down menu and select one of the options. 2 Move the Bright...

ViewSonic ND4200/ND5000 16 TAS Configuration This screen works in conjunction with TAS. (TAS software can be purchased through Tivella at www.tivella.com or through an authorized Tivella dealer/reseller.) Click Management > TAS. The screen shown below appears. 1 In the Timeout (sec) field, type t...

ViewSonic ND4200/ND5000 17 System Services Configuration Configure System Services in the MIB (Management Information Base) to manage the following groups: Network, Browser, Video/Audio, TAS, and System Services. Click Management > System services. The screen shown below appears. 1 In the Network...

ViewSonic ND4200/ND5000 18 FTP server FTP server is only for Network Displays with local storage. The FTP server allows you to use an FTP client for uploading files.

ViewSonic ND4200/ND5000 19 ACTIONS This section mainly concerns video related activities. Video can be streamed by UDP, RTP, IP/TV or HTTP stream and organized in Playlists. When you initiate a stream, you can see the video on your display. You can also change the Transparency of the OSD or go to a ...

ViewSonic ND4200/ND5000 20 Video HTTP To get to the browser setup screen, click Actions > Video HTTP. The screen shown below appears. 1 In the URL field, type the URL that corresponds to the HTTP stream that you want to appear on the display (for example: http:192.168.12.x/movie.mpg, or, http://&...

ViewSonic ND4200/ND5000 21 Playlist To stream existing video Playlists on an HTTP server, click Actions > Playlist. The screen shown below appears. 1 In the URL field, type the URL that corresponds to the Playlist to appear on the display (for example, http://192.168.12.x/playlist.txt or, type th...

ViewSonic ND4200/ND5000 23 Transparency To change the transparency of the browser on-screen in relation to the video image in the background, click Actions > Transparency. The screen shown below appears. 1 In the Transparency between OSD and video layer field, type a number between 0 to 255 for a...

ViewSonic ND4200/ND5000 24 Go to URL To go to a web page on the browser, click Actions > Go to URL. The screen shown below appears. 1 In the URL field, type the desired URL. 2 To redirect the browser to the URL that you entered, click Go. The web page appears on your display.

ViewSonic ND4200/ND5000 25 ADMINISTRATION Advanced Video Configuration To adjust the size and location of the video on the screen, click Administration > Advanced video. The screen shown below appears. 1 In the X of destination window, type the center point of the screen on the X axis. 2 In the Y...

ViewSonic ND4200/ND5000 26 Security To change the User name and Password of the NMP-500, click Administration > Security. Current settings automatically appear in each field as shown below: default User name/Password is admin/admin. 1 In the Password field, type a new password. 2 In the Repeat Pa...

ViewSonic ND4200/ND5000 29 HELP Status Status refers to the log where you can track activity on a specific NMP-500. To show the Status log, click Help > Status. The screen shown below is for information only (no inputs).

ViewSonic ND4200/ND5000 31 APPENDIX Screens Management

ViewSonic ND4200/ND5000 33 Help Customer Support You need the product serial number when you contact Customer Support. Country/Region Website(for email address also) T = TelephoneF = FAX United States www.viewsonic.com T: (800) 688-6688F: (909) 468-1202 Canada www.viewsonic.com T: (866) 463-4775F: (...

ViewSonic ND4200/ND5000 34 FCC Information This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) Rules. These limits are designed to provide reasonable protection against harmful interferenc...

ViewSonic ND4200/ND5000 35 Specifications Specifications are subject to change without notice. Corporate names and trademarks stated herein are the property of their respective companies. ND4200 ND5000 Default resolution 1024 x 768 @ 60 Hz 1366 x 768 @ 60 Hz Dimensions 1015mm (W) x 613mm (H) x 67.5m...

ViewSonic ND4200/ND5000 36 LIMITED WARRANTY ViewSonic ® Limited Warranty Terms and Conditions (Current Production Models. U.S.A. and Canada Only) How the Viewsonic Standard Limited Warranty works: ViewSonic Corporation (“ViewSonic”) warrants its products to be free from defects in material and workm...