ViewSonic N4 - Manuals

ViewSonic N4 – Manual in PDF format online.

Manuals:

Manual

Manual ViewSonic N4

Summary

Page 2 - Contents; Getting Started

ViewSonic NextVision N4 i Contents Getting Started Package Contents .................................................................. 2Safety Precautions ................................................................. 3 The Remote Control Activate the Remote Control .................................

Page 5 - Package Contents

2 ViewSonic NextVision N4 Getting Started Congratulations on your purchase of a ViewSonic NextVision N4 Video Processor. Your N4 allows you to connect to a DVD, game console, VCR, Laser Disk player (LD), stereo system, and a cable or satellite antenna, with only one monitor or other display device. ...

Page 6 - Safety Precautions

ViewSonic NextVision N4 3 Safety Precautions Read all safety precautions for the N4 and your antenna before operating the product. Failure to abide by these precautions may void the warranty. Save the Quick Start Guide and the User Guide for future reference. • Use only the power adapter that came w...

Page 7 - The Remote Control; Activate the Remote Control; To change the battery

4 ViewSonic NextVision N4 The Remote Control Activate the Remote Control The first time you use the remote control, activate the remote control by pulling the plastic tab out of the remote control. CAUTIONS • An explosion may occur if you use the wrong battery! Use only the type of battery recommend...

Page 8 - Using the Remote Control

ViewSonic NextVision N4 5 Using the Remote Control Numeric 10-key pad DISPLAY TV channel(Input source) CH TV Channel up or down VOL Volume up or down CH Scan Press Channel Scan once. A screen appears asking you to press CH Scan again It then automatically scans TV or CATV channels and saves scanned ...

Page 9 - The Video Processor; Front View

6 ViewSonic NextVision N4 The Video Processor Front View Power indicator and IR (infrared) receiver. IMPORTANT: Point the remote control to this par t of the N4. Headphone jack INPUT Press INPUT to switch signals from PC, TV, AV, S-Video VOL+ Increases the volume VOL- Decreases the volume CH- Select...

Page 10 - Back View

ViewSonic NextVision N4 7 Back View AUDIO OUT Connect the AUDIO OUT to your PC speakers. RGB INPUT Using the 15-pin VGA cable provided, connect one side to the VGA output on your PC and the other side to the RGB INPUT of your N4. RGB OUTPUT Connect your 15-pin monitor connector to the RGB OUTPUT. S-...

Page 11 - Setup

8 ViewSonic NextVision N4 Setup Game console DVD/VCR/ LD/IRD Adapter *RCA A/V cable **S-VIDEO cable * For an Audio/Video connection, use the RCA audio (L + R) connectors. **For a video connection, use an RCA video connector or an S-Video connector. Cable or antenna N4 User Guide.book Page 8 Wednesda...

Page 12 - Main Menu

ViewSonic NextVision N4 9 Main Menu Press the MENU button on the remote control for the MAIN MENU shown below. Press the up or down arrow to highlight a menu option. Press ENTER. The selected sub-menu option appears. The command line at the bottom of each menu tells you what to do next. Example, to ...

Page 13 - Picture Menu

10 ViewSonic NextVision N4 Picture Menu Press the up or down arrow to scroll up or down the menu. With an option highlighted, press the ENTER button. To adjust the selected option, press the left or right button . To return to the MAIN MENU and save your adjustments, press MENU. Audio Menu(s) Press ...

Page 14 - Channel Menu

ViewSonic NextVision N4 11 Channel Menu Video Menu To select a resolution and refresh rate, do the following: 1 To scroll up or down the menu, press the up or down arrow on the remote control. 2 With an option highlighted, press the ENTER button. Select a RESOLUTION. 3 Then, select a REFRESH RATE an...

Page 15 - Setup Menu; Information Screen

12 ViewSonic NextVision N4 Setup Menu The N4 has several language options. Information Screen To reset the video/audio performance back to factory defaults, press ENTER on the remote control. Levels of transparency for the OSD menus. This means to “turn OFF” the N4. To clear the 30 minute setting, p...

Page 16 - Other Information; Troubleshooting

ViewSonic NextVision N4 13 Other Information Troubleshooting No picture • Make sure the power cord is connected and the power LED turns red (standby). Turn the video processor on. The LED turns green (on). • Make sure the monitor’s power is on. • Check the connection between the video processor and ...

Page 17 - Specifications

14 ViewSonic NextVision N4 Specifications Note: Product Specifications are subject to change without notice. Video Output type 24 Bit RGB 700 mV ±10% with 75 Ω load (excluding RGB pass-through) RF Frequency rangeNumber of channelsInput level 55.25 - 801.25 MHzOff air 2-69 0 ~ +15 dB mV Output Mode R...

Page 18 - Customer Support

ViewSonic NextVision N4 15 Customer Support For technical support or product service, see the table below or contact your reseller. You will need the product serial number. Country/Region Web site T = TelephoneF = FAX Email United States Canada viewsonic.com viewsonic.com/suppor t T: (800) 688-6688 ...

Page 19 - Cleaning and Maintenance; Compliance Information

16 ViewSonic NextVision N4 Cleaning and Maintenance • Make sure the product is turned off before cleaning. • Never spray or pour any liquid directly onto the product. Spray a clean cloth and wipe the product clean. • Never immerse the product in any liquid. DISCLAIMER ViewSonic ® does not recommend ...

Page 20 - Limited Warranty

ViewSonic NextVision N4 17 Limited Warranty ViewSonic NextVision Video Processor What the warranty covers: ViewSonic ® warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warra...