ViewSonic N2060W - Manuals

ViewSonic N2060W – Manual in PDF format online.

Manuals:

Manual

Manual ViewSonic N2060W

Summary

Page 2 - CONTENTS; Cleaning the; CONNECT PERIPHERAL EQUIPMENT

CONTENTS Important Safety Instructions -------------------------------------------------- 1Copyright Information ------------------------------------------------------------ 2Antenna Installation Instructions---------------------------------------------- 3 Cleaning the LCD TV -----------------------...

Page 3 - Important Safety Instructions; ViewSonic 1 N2060w

Important Safety Instructions 1. Read these instructions completely before using the equipment.2. Keep these instructions in a safe place.3. Heed all warnings.4. Follow all instructions.5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this...

Page 4 - Copyright Information; Product Registration; ViewSonic 2 N2060w

Copyright Information Copyright © ViewSonic ® Corporation, 2006. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation.Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissio...

Page 5 - Antenna Installation Instructions; Cleaning the LCD TV; Disclaimer; ViewSonic 3 N2060w

Antenna Installation Instructions 1. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges, Article 810 of the National Electrical...

Page 6 - FRONT PANEL CONTROL KNOBS; 信号源; Volume; (电源); Power Lock; 频道; ViewSonic 4 N2060w; 菜单

FRONT PANEL CONTROL KNOBS CONNECT PERIPHERAL EQUIPMENT Source( 信号源 ) ① : Press to select your input source. Volume （音量） ②③ : Press to confirm your function selection (when the OSD main menu displayed) or adjust volume (without OSD main menu) Channel （） ④⑤ : Select the intended function by pressing...

Page 7 - PREPARATION; Lay the LCD TV with the screen down on a table, as it will be easier; ViewSonic 5 N2060w

There is a wide range of video and audio equipment that can be connected to your TV. The following connection diagrams show you how to connect them. PREPARATION Lay the LCD TV with the screen down on a table, as it will be easier to connect your peripheral equipment. Please take precaution on page8 ...

Page 8 - OPERATING INSTRUCTIONS; ViewSonic 6 N2060w

USE OF THE REMOTE CONTROL POWER ( 电源 ) Press to turn on/off the TV. The TV is never completely powered off unless it is physically unplugged. Channel ( 频道 ) Press or to browse through the TV channels 。 Volume ( 音量 ) Press + or – to adjust the volume. 0~9/100 Digit buttons To select a TV channel. Mut...

Page 9 - CAUTION; in cracking or leakage, which may pose a fire risk or

3. Remote control: Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AAA 1.5V). CAUTION Only use the speciﬁed AAA batteries.Do not mix new and old batteries. This may result in cracking or leakage, which may pose a ﬁre risk or lead to personal injury.Insert batteries...

Page 11 - ViewSonic 9 N2060w

Place the TV on a solid surface. Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. Avoid heat, direc...

Page 12 - TO USE THE MENUS; Press the MENU button to display or close main menu.; button to exit the menu.; MAIN MENU; Press the; MENU; Setup and TV setup can be selected, shown in the figure below:; ViewSonic 10 N2060w

TO USE THE MENUS 1. Press the MENU button to display or close main menu. 2. Use the cursor up/down to select a menu item. 3. Use the cursor left/right to enter a submenu or enable/disable the function. 4. Press the MENU button to exit the menu. MAIN MENU Press the MENU button to enter the main OSD (...

Page 13 - ViewSonic 11 N2060w

Sound Setup (Same for all modes) 1. The range of adjusting volume, bass and treble is from 0~100. 2. Select “ON” or “OFF” in Audio selection to control the sound output. 3. The range of adjusting Balance is -50~+50; when adjusting from 0 to -50, the sound from the right track fades until silence; wh...

Page 14 - Picture Setup; When the input source is in PC mode, shown in the figure below:; ViewSonic 12 N2060w

6 Picture Setup When the input source is in PC mode, shown in the figure below: 1. Brightness and Contrast: The range can be adjusted from 0~100. 2 . Position: There are two options, Horizontal and Vertical, which can be adjusted from -50 to +50. 3. Video noise: There are two options, Phase and Cloc...

Page 15 - ViewSonic 13 N2060w

When the input source is TV, YPbPr, AV or S-VIDEO mode, shown in the figure below: 1. Brightness and Contrast: The range can be adjusted from 0~100; use Brightness and Contrast options to adjust the brightness of picture. 2. Color: The range can be adjusted from 0~100; use this option to adjust the ...

Page 16 - time out; ViewSonic 14 N2060w

Function Setup, shown in the figure below: 1. OSD time out : could set OSD display time from 10 seconds to 60 2. Language: could set OSD language to English, simplfied Chinese or traditional Chinese 3. Sleep timer: set the time after which the product will enter standby status automatically 4. Reset...

Page 17 - TV setup; ViewSonic 15 N2060w

TV setup The following menu appears only in the TV mode. 1. Program no. : Shows the current channel number 2. Color system: shows the current picture input system （ shows auto after auto search ） 3. Sound system: shows the current sound input system （ shows auto after auto search ） 4. Auto search: U...

Page 18 - HEADPHONE; The headphone jack is located at the r; TIPS; Care of the screen; damage the screen permanently.; Mobile telephone warning; damage to the TV, keep away your mobile telephone from the TV.; End of life directives; materials to be disposed of.; ViewSonic 16 N2060w

HEADPHONE 1. The headphone jack is located at the r ight side of the TV. 2. The MUTE key on the remote control works on both internal speaker and the headphone. 3. Use volume key to adjust the volume. TIPS Care of the screen Do not rub or strike the screen with anything hard as this may scratch, mar...

Page 19 - ViewSonic 17 N2060w

Appendix Specifications Panel Type 20” TFT-LCD Active Matrix wide-XGA, 1360x 768 Color Anti-glare coating Viewing angles 160° H/ 160° V Input signal Video Fh: 32-48KHz, Fv: 50-60Hz VGA input*1 TV system antenna Composite Video input*1 S-Video*1 Component video*1 (YPbPr / YCbCr) Audio Audio input*1 R...

Page 20 - ViewSonic 18 N2060w

Storage Temperature -25 ℃ to 60℃ conditions Humidity 10% to 85%(no condensation) Dimension Physical 521.84mm(W) x 419.52mm(H) x 180.83mm(D) 20.55”(W) x 16.52”(H) x 7.12”(D) Package 595mm(W) x 512mm(H) x 226mm(D) 23.4”(W) x 20.2”(H) x 8.9”(D) Weight Net 6.9Kg (15.2 Ib.) Gross 9 Kg (19.9 Ib.) Regulati...

Page 21 - Troubleshooting; ViewSonic 19 N2060w

Troubleshooting No power • Make sure the LCD TV is properly connected. • Make sure the AC power cord is properly connected. • Make sure the AC power is ON, DC power button is ON (Green LED). • Plug another electrical device (like a radio) to the power outlet to verify that the outlet is supplying th...

Page 22 - Cusomer Support; Region; ViewSonic 20 N2060w

For technical support or product service, see the table below or contact your reseller. Note: You will need the product serial number. Cusomer Support Country/ Region Web Site Telephone Email China www.viewsonic.com.cn 800 820 3870 [email protected] ViewSonic 20 N2060w

Page 23 - Limited Warranty; ViewSonic 21 N2060w

Limited Warranty VIEWSONIC ® LCD TV What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will a...