ViewSonic CDP5560-L - Manuals

ViewSonic CDP5560-L – Manual in PDF format online.

Manuals:

Manual

Manual ViewSonic CDP5560-L

Summary

Page 2 - Compliance Information; FCC Statement; Reorient or relocate the receiving antenna.; For Canada

i Compliance Information NOTE: This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on unit. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is su...

Page 3 - ii; CE Conformity for European Countries; Following information is only for EU-member states:; Industry Canada Notice

ii CE Conformity for European Countries The device complies with the EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC. Following information is only for EU-member states: The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/E...

Page 4 - iii; Declaration of RoHS2 Compliance; Substance; Hexavalent Chromium (Cr

iii Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to c...

Page 5 - iv; Safety Precautions; USING THE LCD COLOR MONITOR:

iv Safety Precautions FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOR MONITOR: • DO NOT REMOVE MONITOR BACK COVER. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all ...

Page 6 - personnel under the following conditions:; Recommended Use; eye fatigue due to insufficient contrast.

v CAUTION: Immediately unplug your monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions: • When the power supply cord or plug is damaged. • If liquid has been spilled, or objects have fallen into the monitor. • If the monitor has been exposed...

Page 7 - Table Of Contents; using the display’s control; Technical Specifications; a Daisy-chain Configuration

vi Table Of Contents 4. OSD Menu ............................................ 15 4.1. Navigating the OSD Menu .......... 15 4.1.1. Navigating the OSD menu using the remote control .... 15 4.1.2. Navigating the OSD menu using the display’s control buttons ............................... 15 4.2. OSD M...

Page 8 - vii; Copyright Information; Product disposal at end of product life

vii Copyright Information Copyright © ViewSonic ® Corporation, 2014. All rights reserved. ViewSonic © , the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation.ENERGY STAR ® is a registered trademark of the U.S. Environmental Protection Agency (EPA)....

Page 9 - Unpacking and Installation

1 1. Unpacking and Installation 1.1. Unpacking • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • Due to the size and weight of this display it is recommended for two people to move it. • After opening the carto...

Page 10 - To install table stands:; To remove table stands:; Spread a protective sheet on a flat surface.

2 1.4. Installing and Removing Table Stands (optional) To install table stands: 1. Ensure your display is powered off.2. Spread a protective sheet on a flat surface. 3. Grab the carrying handles and place the display face-down on the protective sheet. 4. After inserting the stand in the guide block,...

Page 11 - Enclosure Ventilation Requirements

3 Protective Sheet VESA Grid For Tabletop stand Table 1. Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface so as not to scratch the screen face. 2. Ensure you have all accessories for mounting this display (wall mount, ceiling mo...

Page 12 - Parts and Functions

4 2. Parts and Functions 2.1. Control Panel CDP4260-L/CDP4262-L/CDP5560-L/CDP5562-L: 1 2 3 4 5 6 7 8 MUTE INPUT MENU 9 CDX4652-L: 1 2 3 4 5 6 7 8 MUTE INPUT MENU 9

Page 16 - confirm and exit the selection.

8 2.3. Remote Control 2.3.1. General functions POWER SMART VIDEO SOURCE PIP INPUT ON/OFF CHANGE BRIGHTNESS CONTRAST DISPLAY AUTO ADJUST VOL UP VOL DOWN EXIT MENU SET AUDIO SOURCE OPTION 1 10 11 12 131415 16 1718 23 19 20 2 3 4 5 6 78 9 21 22 1 [POWER] button Press to switch on the display from stand...

Page 17 - control

9 2.3.2. Inserting the batteries in the remote control The remote control is powered by two 1.5V AAA batteries.To install or replace batteries: 1. Press and then slide the cover to open it. 2. Align the batteries according to the (+) and (–) indications inside the battery compartment. 3. Replace the...

Page 18 - Connecting External Equipment

10 3. Connecting External Equipment 3.1. Connecting External Equipment (DVD/VCR/VCD) 3.1.1. Using COMPONENT video input DVD / VCR / VCD [AUDIO IN] [COMPONENT IN] (Pr/Pb/Y) COMPONENT Out (YPbPr) Audio Out [R] [L] 3.1.2. Using HDMI video input DVD / VCR / VCD HDMI Out [HDMI IN]

Page 21 - Connecting Multiple Displays in a Daisy-chain Configuration

13 3.4. Connecting Multiple Displays in a Daisy-chain Configuration You can interconnect multiple displays to create a daisy-chain configuration for applications such as a video wall. NOTE: Maximum 25 displays (5x5) can be used in a daisy-chain configuration. 3.4.1. Display control connection Connec...

Page 22 - NOTE; : This display’s remote control sensor will stop working if the [; IR IN

14 3.4.4. IR connection (optional) DISPLAY 1 DISPLAY 2 [IR IN] [IR OUT] [IR IN] External IR Receiver [IR OUT] POWER SMART VIDEO SOURCE PIP INPUT ON/OFF CHANGE BRIGHTNESS CONTRAST DISPLAY AUTO ADJUST VOL UP VOL DOWN EXIT MENU SET AUDIO SOURCE OPTION NOTE : This display’s remote control sensor will st...

Page 23 - PIP; button and the flesh tone color turns slightly green.

15 4. OSD Menu An overall view of the On-Screen Display (OSD) structure is shown below. You can use it as a reference for further adjusting your display. 4.1. Navigating the OSD Menu 4.1.1. Navigating the OSD menu using the remote control EXIT MENU SET 1. Press [ MENU ] button on the remote control ...

Page 26 - configured as follows:; within an amount of time specified.

18 4.2.4. PIP menu PIP 123 SET EXIT MENU PIP :SEL :NEXT PIP MODE PIP SIZE PIP AUDIO PIP H POSITION PIP V POSITION SUB INPUT PIP RESET PIP :RETURN :EXIT MENU SMALL MAIN AUDIO 100 0 VIDEO OFF PIP MODE Select the PIP (Picture-in-Picture) mode.The options are: { OFF } / { PIP } / { POP } / { SBS ASPECT ...

Page 28 - TILING

20 4.2.6. CONFIGURATION2 menu PIP 12 3 SET EXIT MENU 2 :SEL :NEXT LANGUAGE OSD TURN OFF OSD H POSITION OSD V POSITION MONITOR ID IR CONTROL TILING POWER ON DELAY CLOSED CAPTION CONFIGURATION2 RESET INFORMATION OSD MONITOR INFORMATION CONFIGURATION2 :RETURN :EXIT MENU OFF OFF 50 50 3 SEC. 1 45 LANGUA...

Page 29 - POWER SAVE; HEAT STATUS

21 • POSITION - Select the position of this display in the screen matrix. • FRAME COMP. - Choose to turn the frame compensation function on or off. If turned on, the display will adjust the image to compensate for the width of the display bezels in order to accurately display the image. • ENABLE : C...

Page 30 - SCREEN SAVER

22 SCREEN SAVER Choose to enable the panel saving functions to reduce the risk of the “ image persistence ”. EXIT MENU :SEL +-:ADJ :RETURN :EXIT MENU SCREEN SAVER COOLING FAN BRIGHTNESSMOTION AUTO OFFOFF • { COOLING FAN } - Select { ON } to turn on the cooling fan all the time. Select { AUTO } to tu...

Page 31 - ADVANCED OPTION RESET

23 SCAN CONVERSION Choose to enable or disable the IP (Interlace to Progressive) conversion function. • { PROGRESSIVE } - Enable the IP conversion function (recommended). Once enabled, the interlace input signal will be converted to progressive format for better display quality. • { INTERLACE } - Di...

Page 33 - Cleaning and Troubleshooting; When Using the Display; may damage the cables and thus cause fire or electric shock.; Front Panel Cleaning Instructions; If the cabinet becomes dirty, wipe the cabinet with a soft, dry cloth.

25 6. Cleaning and Troubleshooting 6.1. Cleaning When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. Burns ...

Page 34 - Display image doesn’t fill up; to fine tune display geometry and

26 6.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 2. The main power switch on the back of the display is not switched on. 3. The selected input has no connection. 4. The display is in standby mode. 1. Plug in the power cord. 2. Make sure...

Page 35 - Item

27 7. Technical Specifications 7.1. CDP4260-L / CDP4262-L Display: Item Specifications Screen Size (Active Area) 42” LCD Aspect Ratio 16:9 Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.4845 (H) x 0.4845 (V) [mm] Displayable colors 1.06 Billion colors Brightness (typical) 700 cd/m2 (CDP4262-L)45...

Page 41 - You will need the product serial number.; Website

33 8. Other Information Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/Region Website T = Telephone F = FAX Email Australia New Zealand www.viewsonic.com.au AUS= 1800 880 818 NZ= 0800 008...

Page 42 - Limited Warranty; ViewSonic; What the warranty covers:; This warranty is valid only for the first consumer purchaser.; What the warranty does not cover:; b. Any damage of the product due to shipment.

34 Limited Warranty ViewSonic ® LCD Commercial Display What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the war- ranty per...

Page 43 - Any claim against the customer by any other party.

35 Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose. Exclusion of damages: ViewSonic’s liability is limited to the cost of repair ...

Page 44 - Mexico Limited Warranty; manufactured or refurbished parts or components.; Who the warranty protects:; purchase to support your warranty claim.; Limitation of implied warranties:

36 Mexico Limited Warranty ViewSonic ® LCD Commercial Display What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warrant...