ViewSonic CD5233 - Manuals

ViewSonic 3 CD5233 SAFETY INSTRUCTIONS WARNINGS AND PRECAUTIONS KNOW THESE SAFETY SYMBOLS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present insi...

ViewSonic 4 CD5233 REGULATORY INFORMATION CE DECLARATION OF CONFORMITY MMD declare under our responsibility that the product is in conformity with the following standards • EN60950-1:2006+A11:2009 (Safety requirement of Information Technology Equipment) • EN55022:2006+A1:2007 (Radio Disturbance requ...

ViewSonic 5 CD5233 POLISH CENTER FOR TESTING AND CERTIFICATION NOTICE The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source. The phas...

ViewSonic 6 CD5233 INFORMATION FOR UK ONLY WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse. 2. Fit new fuse which should be a BS 1362 5A,A.S.T.A....

ViewSonic 7 CD5233 中国电子信息产品污染控制标识要求 ( 中国 RoHS 法规标示要求 ) 产品中有毒有害物质或 元素的名称及含量 有毒有害物质或元素 部件名称 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr 6+) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 外壳 ○ ○ ○ ○ ○ ○ 液晶面板 × × ○ ○ ○ ○ 电路板组件 × ○ ○ ○ ○ ○ 附件 ( 遥控器、电源线、连接线 ) × ○ ○ ○ ○ ○ 遥控器电池 × ○ ○ ○ ○ ○ ○： 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求 ...

ViewSonic 8 CD5233 NORTH EUROPE (NORDIC COUNTRIES) INFORMATION Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILG...

ViewSonic 9 CD5233 Video Signal Cable (D-SUB to D-SUB Cable) Package Contents The LCD monitor pack* should include: • LCD monitor • Power cord (1.8 m) • VGA Signal Cable (1.8 m) • CD User Manual & QSG • Remote Control and AAA Batteries • Main switch cover • Screw for Main Switch cover x2 • Clamp...

ViewSonic 10 CD5233 Parts Name and Functions Control Panel POWER button ( ) : To switch the power on/off. MUTE button : To switch the audio mute ON/OFF. SOURCE button : To set the function while OSD menu is on or to activate input selection menu while OSD menu is off. PLUS (+) button : To increase t...

ViewSonic 11 CD5233 Terminal Panel EXTERNAL CONTROL (mini D-Sub 9 pin) This is for serial connection when multiple monitors are connected. To achieve remote management through RS232 commands (refer to the RS232 remote control user manual), connect the RS-232C OUT connector from a computer or from a ...

ViewSonic 12 CD5233 Remote Control POWER button To turn the power on/off. If LED Power Indicator on the monitor is not lightening, then the remote control will not work. PICTURE MODE button To select picture mode from [HIGHBRIGHT], [STANDARD], [sRGB], [CINEMA]. HIGHBRIGHT : for moving image such as ...

ViewSonic 13 CD5233 Operating Range for the Remote Control Point the top of the remote control towards the LCD monitor's remote sensor during button operation. Use the remote control within a distance of about 7 m/ 23 ft from the front of the LCD monitor's remote control sensor and within a horizont...

ViewSonic 14 CD5233 Setup Procedure 1. Install the system on the right location CAUTION: THE LCD MONITOR MUST BE MOVED OR INSTALLED BY TWO OR MORE PERSONS. Failure to follow this caution may result in injury and damage when the LCD monitor falls. CAUTION: DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY...

ViewSonic 15 CD5233 9. Adjust the image Make adjustments to brightness or contrast if required. 10. Recommended Adjustment To reduce the risk of “image persistence”, please adjust the following items based on the application being used. “POWER SAVE”, “PANEL SAVING”, “DATE AND TIME”. 11. To prevent t...

ViewSonic 16 CD5233 How to Mount and Attach Feet to the LCD Monitor You can install the LCD monitor in one of the following two ways: Method 1: Attach and remove the optional stands How to install stands 1. Please turn the monitor off. 2. After inserting stand in guide block, fasten the thumbscrews ...

ViewSonic 17 CD5233 To avoid monitor from falling Take measures to prevent the monitor from falling over in case of an earthquake or other disaster might occur to lessen the probability of injury and damage. As shown in the figure below, secure the monitor to a solid wall or pillar using rope (comme...

ViewSonic 18 CD5233 Ventilation Requirements for enclosure locating To allow heat to disperse, leave space between surrounding objects as shown in the diagram below.

ViewSonic 19 CD5233 Connectivity Before making connections: * First turn off the power of all the attached equipments before make connections. * Refer to the user manual included in each separate piece of equipment. Connectivity Diagram

ViewSonic 20 CD5233 Connecting to a Personal Computer As you finish the connection between the computer and the LCD monitor, you could play the contents in the computer and display them on the LCD monitor. Connecting the LCD Monitor to a Personal Computer • To achieve this, apply the supplied VGA si...

ViewSonic 21 CD5233 Connecting to a Digital Interface Equipment Connections can be made between the LCD monitor and other digital equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) standard. Connect the LCD Monitor to a Computer with a Digital Outpu...

ViewSonic 22 CD5233 Connecting to a DVD Player As you finish the connection between the DVD player and the LCD monitor, you could display the contents from the played DVD on the LCD monitor. You might like to refer to your DVD player’s manual for further information. Connect the LCD Monitor to a DVD...

ViewSonic 23 CD5233 Connecting to a Stereo Amplifier You can connect your stereo amplifier to your LCD monitor. Refer to your amplifier's manual for further information. Connect the LCD Monitor to a Stereo Amplifier • Turn on the LCD monitor and the amplifier only after all connections have been fin...

ViewSonic 24 CD5233 Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red while powered off. The monitor can be powered on or off using the following three options: 1. Pressing the Main Power Switch. NOTE: When the Main Power Switch...

ViewSonic 25 CD5233 Power Indicator Status Power ON Green Power Standby Red Power OFF LED Off Diagnosis (Detecting failure) Red Blinking * See troubleshooting Using Power Management Please turn off the LCD monitor when it will not be used for long time. This could potentially increase the life and d...

ViewSonic 26 CD5233 Smart Picture Mode HDMI, VGA HIGHBRIGTH STANDARD sRGB COMPONENT, VIDEO HIGHBRIGTH STANDARD CINEMA Audio Source Switching You can select the audio source using the AUDIO SOURCE button on the remote control. HDMI HDMI AUDIO1 AUDIO2 AUDIO3 Control Lock Mode This function disables th...

ViewSonic 27 CD5233 OSD (On-Screen-Display) Controls Remote Control Control Panel Press MENU button to open Main menu. Press UP or DOWN button to select sub-menu. Press EXIT button to open Main menu. Press UP or DOWN button to select. Press ENTER button to enable setting. Press SOURCE button to enab...

ViewSonic 28 CD5233 Main-Menu PICTURE BRIGHTNESS Adjusts the overall image and background screen brightness. Press ▶ button to increase brightness. Press ◀ button to decrease brightness. CONTRAST Adjusts the image brightness for the input signal. Press ▶ button to increase contrast. Press ◀ button t...

ViewSonic 29 CD5233 COLOR * : INPUT HDMI , DVI-D(INPUT MODE-HD), COMPONENT, S-VIDEO, VIDEO only Adjusts the color of the screen. Press + button to increase color depth. Press - button to decrease color depth. COLOR TEMPERATURE Is used to adjust the color temperature. The image becomes reddish as the...

ViewSonic 30 CD5233 Main-Menu SCREEN H POSITION Controls Horizontal Image position within the display area of the LCD. Press ▶ button to move screen to right. Press ◀ button to move screen to left. V POSITION Controls Vertical Image position within the display area of the LCD. Press ▶ button to move...

ViewSonic 31 CD5233 CUSTOM ZOOM “CUSTOM ZOOM” will be selected when you select “CUSTOM” on the screen “ZOOM” mode. ZOOM: expands the horizontal and the vertical size simultaneously. HZOOM: expands the horizontal size only. VZOOM: expands the vertical size only. H POSITION: moves to the right with + ...

ViewSonic 32 CD5233 Main-Menu AUDIO BALANCE Adjusts the balance of L/R volume. Press ▶ button to move the stereo sound image to right. Sound of the left side will be small. Press ◀ button to move the stereo sound image to left. TREBLE This feature helps you to accentuate or reduce the high frequency...

ViewSonic 33 CD5233 Main-Menu PIP (PICTURE IN PICTURE) Note: The “PIP” and “POP” modes do not function when the screen size is “CUSTOM” or “REAL”. PIP SIZE Selecting the size of picture inserted at the “Picture-in-Picture” (PIP) mode. “Large”, “Middle” and “Small” are available. PIP AUDIO Selecting ...

ViewSonic 34 CD5233 Main-Menu CONFIGURATION 1 AUTO ADJUST * : INPUT VGA only Press "ENTER" button to automatically adjust screen size, horizontal position, vertical position, clock, clock phase, white level and black level. Press " EXIT " button to cancel execution AUTO ADJUST and th...

ViewSonic 35 CD5233 FACTORY RESET Selecting "YES" allows you to reset PICTURE, SCREEN, AUDIO, CONFIGURATION1,2 and ADVANCED OPTION will be back to factory settings (except LANGUAGE, DATE AND TIME and SCHEDULE). Select "YES" and press "ENTER" button to restore the factory pres...

ViewSonic 36 CD5233 Main-Menu CONFIGURATION 2 OSD TURN OFF The OSD control menu will stay on as long as it is used. In the OSD Turn Off submenu, you can select how long the monitor waits after the last touch of a button to shut off the OSD control menu. The preset choices are 5 -120 seconds. INFORMA...

ViewSonic 37 CD5233 Main-Menu ADVANCED OPTION INPUT RESOLUTION * : INPUT VGA only This feature makes the display controlling the source in order to match display capabilities by choice or automatically. You can select one of the following timings: (1)1024x768, 1280x768, 1360x768 and 1366x768. (2) 64...

ViewSonic 38 CD5233 FILM MODE * : INPUT HDMI, DVI-D(MODE-HD), S-VIDEO, VIDEO only Selects Film mode function. AUTO: Enable the Film mode function. This mode is better suited for movies, which is converted 24 Frames/sec source to DVD Video. We recommend to select “PROGRESSIVE” in “SCAN CONVERSION”. O...

ViewSonic 39 CD5233 SCHEDULE Programs the monitor's working schedule. Schedules the power on and power off by using hour and a day of the week. Also sets the input port. This OSD can't be removed except EXIT. MONITOR ID ID numbers for remote control are assigned to monitors that are multi-connected ...

ViewSonic 40 CD5233 NOTE NOTE 1: IMAGE PERSISTENCE Please be aware that LCD Technology may experience a phenomena known as Image Persistence. Image Persistence occurs when residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistenc...

ViewSonic 41 CD5233 NOTE 3: “PIP”, “POP” and “SIDE BY SIDE” The following table shows the combination of signal inputs under which the “PIP” and “POP” modes function. These modes do not function, however, when the screen size is “CUSTOM” or “REAL”. SUB HDMI DVI-D VGA COMPONENT S-VIDEO VIDEO HDMI  ...

ViewSonic 42 CD5233 Features Full HD LCD display 1920x1080p This display has a resolution that is referred to as Full HD. The state-of-the-art LCD screen technology has the full high-definition widescreen resolution of 1080 progressive lines, each with 1920 pixels. This allows the best possible pict...

ViewSonic 43 CD5233 Troubleshooting No picture • The signal cable should be completely connected to the graphics card/computer. • Front Power Switch and computer power switch should be in the ON position. • Check to make sure that a supported mode has been selected on the graphics card or system bei...

ViewSonic 44 CD5233 No Sound • Check to see if speaker cable is properly connected. • Check to see if mute is activated. • Check to see if volume is set at minimum. Remote Control does not work • Check the Remote Control’s batteries status. • Check if batteries are inserted correctly. • Check if the...

LCD Module Diagonal: Pixel Pitch: Resolution: Color: Brightness: Contrast Ratio: Response time: View Angle: 52" / 132.0 cm0.60 mm 1920 x 1080 dots 1.07 billion colors (depending on video card used) 700 cd/m2 (typ.) 4000:1 (typ.) 8 ms (typ. G to G) Up and Down 178°, Left and Right 178° (typ.) @CR...

/LPLWHG:DUUDQW\ 9,(:621,&/&'&RPPHUFLDO'LVSOD\ :KDWWKHZDUUDQW\FRYHUV 9LHZ6RQLF ZDUUDQWV LWV SURGXFWV WR EH IUHH IURP GHIHFWV LQ PDWHULDO DQG ZRUNPDQVKLS XQGHU QRUPDO XVH GXULQJ WKHZDUUDQW\ SHULRG ,I D SURGXFW SURYHV WR EH GHIHFWLYH LQ PDWHULDO RU ZRUNPDQVKLS GXULQJ WKH ZDUUDQW\ SHULRG 9LH...