Page 2 - DIESEL HEATER
- 2 - MODEL:XMZ-D1 MODEL:XMZ-D2 DIESEL HEATER Have product questions? Need technical support? Please feel free to contact us: [email protected] NEED HELP? CONTACT US! This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretati...
Page 3 - SAFETY INSTRUCTION
- 3 - Warning-To reduce the risk of injury, the user must read the instructions manual carefully. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2)this device must accept any interferenc...
Page 4 - PRODUCT FUNCTION
- 4 - other flammable objects. 4. Do not use cigarette lighter for startup. 5. Do not use the heater in closed and/or unv entilated places. 6. The heaters shall be turned off when filling fuel. 7. Do not cut off the electric power in operation. 8. If the fuel leak or discharge from the fuel system o...
Page 5 - and car glass defrost fog.; INTERNAL STRUCTURE
- 5 - installation. 2. The heater get rid of damage to car caused by the sudden drop of temperature, improve the temperature inside the car, and preheat the engine coolant to av oid the engine wear at low temperature. Conducive to car interior thawing, car start, and car glass defrost fog. INTERNAL ...
Page 6 - INSTALLATION POSITION
- 6 - 1. On the co-driver's legroom. 2.On the back wall of the cab. 3.Driver's seat backrest. 4.Within the tool box. 1. In front of the passenger seat. 2. Between the driver seat and passenger seat. 3. 3&4 under the container. 4. In the trunk. The heater is mainly installed in the passenger room...
Page 9 - Split type; facilitate the operation of the fuel pump.; INSTALLATION DIAGRAM
- 9 - XMZ-D2 ( Split type ) During installation, the oil tank should be properly placed abov e the main engine to facilitate the operation of the fuel pump. INSTALLATION DIAGRAM
Page 10 - Horizontal type
Page 11 - Vertical type; Warning; The air inlet shall not be blocked, and keep the inlet open and clear.
- 11 - XMZ-D1 ( Vertical type ) Warning : 1. The air inlet shall not be blocked, and keep the inlet open and clear. 2. Keep the exhaust pipe clear.The exhaust pipe outlet shall be kept away from anything flammable, and avoid heating and igniting the flammable goods and loading cargo on the ground. 3...
Page 12 - Please wait patiently.; Key Description; REMOTE CONTROL OPERATION INSTRUCTIONS
- 12 - downward. After starting the machine for 3-5 minutes, it will work normally and heat up. Please wait patiently. Key Description 【 】On/Off key; 【 ▲ 】【 ▼ 】:Gear/Temperature/Item adjustment key; 【M】:Mode switching/Setup key; REMOTE CONTROL OPERATION INSTRUCTIONS
Page 16 - BLUETOOTH OPERATION
- 16 - jammed. 2. Check whether the fan plug is loose and falsely connected. 3. The fan is faulty; replace the fan. 4. Check whether the wind wheel induction magnet is missing or has the wrong polarity. 5. Check whether the main board wind speed sensor is normal. 6. The main board is faulty; replace...
Page 19 - Long press the
- 19 - 4. Long press the 【 】 to turn on/turn off the heater. 5. Click "mode" button to switch the gear mode or temperature control mode, then Click "up +" /"down - ” button to increase + or decrease- the level (level 1- 10)/temperature(8°C~36°C).
Page 20 - table mentioned earlier for the type of fault.
- 20 - 6. Fault display: when the heater fails, it will display the fault code E-xx, see the table mentioned earlier for the type of fault.
Page 21 - Address; Shanghai; Pooledas Group Ltd; Made In China; UK REP
- 21 - Address : Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: VEVOR STORE INC, 9448 RINCHMOND PL #E RANCHO CUCAMONGA, California, 91730 United States of America Pooledas Group Ltd Unit 5 Alber...
Page 22 - Technical Support and E-Warranty Certificate
Technical Support and E-Warranty Certificate www.vevor.com/support