VEVOR ZCJRQFT12V8KWN9JQV9 - Manuals

Page 2 - DIESEL HEATER

- 2 - MODEL:XMZ-D1 MODEL:XMZ-D2 Have product questions? Need technical support? Please feel free tocontact us: [email protected] NEED HELP? CONTACT US! This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user ...

Page 3 - SAFETY INSTRUCTION

- 3 - Warning-To reduce the risk of injury, the user must read theinstructions manual carefully. This device complies with Part 15 of the FCC Rules. Operation issubject to the following two conditions:(1)This device may not causeharmful interference, and (2)this device must accept anyinterference re...

Page 4 - PRODUCT FUNCTION

- 4 - other flammable objects.4. Do not use cigarette lighter for startup.5. Do not use the heater in closed and/or unventilated places.6. The heaters shall be turned off when filling fuel.7. Do not cut off the electric power in operation.8. If the fuel leak or discharge from the fuel system of heat...

Page 5 - INTERNAL STRUCTURE

- 5 - installation.2.The heater get rid of damage to car caused by the sudden drop of temperature,improve the temperature inside the car, and preheat the engine coolant to avoidthe engine wear at low temperature. Conducive to car interior thawing, car start,and car glass defrost fog. INTERNAL STRUCT...

Page 6 - INSTALLATION POSITION

- 6 - INSTALLATION POSITION 1.On the co-driver's legroom.2.On the back wall of the cab.3.Driver's seat backrest.4.Within the tool box. 1. In front of the passenger seat.2. Between the driver seat and passenger seat.3. 3&4 under the container.4. In the trunk. The heater is mainly installed in the...

Page 9 - INSTALLATION DIAGRAM

- 9 - INSTALLATION DIAGRAM XMZ-D2 （ Split type ） During installation, the oil tank should be properly placed above the main engine tofacilitate the operation of the fuel pump.

Page 11 - Warning

- 11 - XMZ-D1 （ Vertical type ） Warning ： 1.The air inlet shall not be blocked, and keep the inlet open and clear.2.Keep the exhaust pipe clear.The exhaust pipe outlet shall be kept awayfrom anything flammable, and avoid heating and igniting the flammablegoods and loading cargo on the ground.3.To en...

Page 12 - REMOTE CONTROL OPERATION INSTRUCTIONS

- 12 - downward. REMOTE CONTROL OPERATION INSTRUCTIONS After starting the machine for 3-5 minutes, it will work normally and heat up.Please wait patiently. Key Description 【】On/Off key；【  】【  】：Gear/Temperature/Item adjustment key；【M】：Mode switching/Setup key;

Page 16 - BLUETOOTH OPERATION

- 16 - jammed.2.Check whether the fan plug is loose andfalsely connected.3.The fan is faulty; replace the fan.4.Check whether the wind wheel inductionmagnet is missing or hasthe wrong polarity.5.Check whether the main board wind speedsensor is normal.6.The main board is faulty; replace the mainboard...

Page 21 - Address; Shanghai; REP; Made In China

- 21 - Address ： Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: VEVOR STORE INC, 9448 RINCHMOND PL #E RANCHO CUCAMONGA, California, 91730 United States of America REP UK Pooledas Group LtdUnit 5...