VEVOR DDD2500G3750WZAJKV1 - Manuals

Page 2 - GRINDER

- 1 - SX-2A SX-4A SX-6B SX-8B SX-10B <Picture Only For Reference > Have product questions? Need technical support? Please feel free tocontact us: [email protected] NEED HELP? CONTACT US! This is the original instruction, please read all manual instructions carefully before operating. VEVOR res...

Page 3 - Warnings

- 2 - Note: Before beginning assembly of product, make sure all parts are present. Compare parts with package content list and hardware contents. Do not attempt to assemble the unitif any parts are missing or damaged.Contact customer service for replacement parts. Warnings When using electrical appl...

Page 5 - TECHNICAL PARAMETER

- 4 - 23.Type X attachment: If the supply cord is damaged, it must be replaced by a special cordor assembly available from the manufacturer or its service agent.24.Do not fill the grinding tank to full otherwise it will cause overload. The material yougonna to grind one time must cover the long blad...

Page 6 - PRODUCT STRUCTURE

Page 7 - OPERATING INSTRUCTION

- 6 - OPERATING INSTRUCTION 1. Operations Guide: 1)Open the upper cover and put the dried material inside;2)Close the upper cover tightly; (Please make sure the lid is rotated to the end and lockedtightly on the top.)3)Plug in and turn on the timer switch, then turn on the switch for grinding(Rollin...

Page 9 - INSTRUCTIONS OF AIR OVERLOAD PROTECTOR

- 8 - damage to the motor. 3) Put too much materials into the grinding bin one time. The material you gonna to grind one time must cover the long blade in the middle and nomore than 2/3 of the tank. Because this machine needs a space to complete the cycle ofthe blades and the material to be grind. I...

Page 11 - OPERATING PROCEDURES OF REPLACING BLADES

Page 12 - HOW TO REPLACE CARBON BRUSHES

- 11 - HOW TO REPLACE CARBON BRUSHES • The upright type grinder: • The swing type grinder:

Page 13 - TROUBLE SHOOTING

- 12 - TROUBLE SHOOTING Trouble Cause Elimination method (*Please cut offthe power when doing following) The machine does notoperate after power on. Poor contact betweenthe plug and socket. Please plug in the power cord andcheck whether the power indicatorlights is on.If the indicator does not light...

Page 14 - ENVIRONMENTAL PROTECTION

- 13 - Motor run slowly,or notruns, evenvibrates,making noise. Stuck inside of crushcabin by material, orforeign subject. Remove the stuck stuff. Low power voltage. Insert the plug directly wall socketinstead of the terminal block. Thentry another place to see if themachine can be turned on. Motor c...

Page 15 - REP

- 14 - Importer: WAITCHX Address: 250 bis boulevard Saint-Germain 75007 Paris Importer: FREE MOOD LTD Address: 2 Holywell Lane, London, England, EC2A 3ET Manufacturer: Anhui Xuzhong Intelligent Technology Co., Ltd. Address: No.23, Lantian Road, Economic Decelopment Zone, Wangjiang County, Anqing Cit...

VEVOR DDD2500G3750WZAJKV1 - Manuals

Manuals:

User Manual VEVOR DDD2500G3750WZAJKV1

Summary

VEVOR Coffee Grinders Manuals