VEVOR D2HP90GPM110V1ZFMV1 - Manuals

Page 2 - Instruction Manual

01 Have product questions? Need technical support? Please feel free to contact us: [email protected] NEED HELP? CONTACT US! IMPORTANT : Be sure to review the contents of this manual before attempting to operate the equipment. This manual should be located where it can be easily referenced by all use...

Page 3 - MAIN PARTS; PARTS; INSTALLATION; READ CAREFULLY AND SAVE THIS INSTRUCTION MANUAL; SAFETY PRECAUTIONS

02 MAIN PARTS PARTS 1.Lid & Clamp Ring 2.O-Ring 3.Strainer 4.Clip-Bayonet 5.Strainer body 6.Drain Plug 7.Diffuser O-Ring 8.Bolts 9.Diffuser 10.Pump Housing O-Ring 11.Impeller 12.Pump Housing 13.Motor 14.Shaft Seal INSTALLATION READ CAREFULLY AND SAVE THIS INSTRUCTION MANUAL ATTENTION INSTALLER –...

Page 4 - DA NG ER

03 The following information is very important for safety in handling this product. Be sure to observe it. DANGER Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury. WARNING Indicates a potentially hazardous situation that, if not avoided, could ...

Page 5 - C A U T I ON

04 WARNING: This product should be installed and serviced by a qualified pool professional. WARNING: Keep product away from c hildren. C A U T I ON All electrical wiring must be in conformance with applicable local codes, regulations, and the National Electric Code (NEC). It is strongly advised to p...

Page 7 - Pump discharge port can be turned to horizontal:

06 Pump discharge port can be turned to horizontal: • Remove pump lid and Strainer. • Remove clip-bayonet (part# 4 in the parts list). • Remove the pump strainer body from the pump housing. • Unscrew the 8 bolts. • Turn the discharge port to be horizontal. • Screw back the 8 bolts. • Re-install the ...

Page 8 - MOTOR WILL NOT START; PUMP WON’T PRIME

07 PRIMING Fill strainer housing with water to suction pipe level. If water leakage occurs anywhere on the pump or filter, DO NOT start the pump. If no leakage occurs, stand at least 10 feet from the pump and/or filter and proceed with starting the pump. TROUBLE SHOOTING MOTOR WILL NOT START • Impro...

Page 9 - LOW FLOW; NOISY PUMP

08 TROUBLE SHOOTING(CONTINUED) LOW FLOW • Clogged or restricted strainer or suction line; undersized pool piping. • Plugged or restricted discharge line or filter, valve partially closed (high gauge reading). How to correct: Backwash strainer as per manufacturer’s instructions; • Air leak in suction...

VEVOR D2HP90GPM110V1ZFMV1 - Manuals

Manuals:

User Manual VEVOR D2HP90GPM110V1ZFMV1

Summary