Verilux VF01 - Manuals - manualsarea.com

Page 3 - SAVE THESE INSTRUCTIONS; IMPORTANT SAFETY INSTRUCTIONS

3 SAVE THESE INSTRUCTIONS Thank you for purchasing the Original Natural Spectrum ® Deluxe Floor Lamp. Please read the following safety information before using. To reduce the risk of fi re, electrical shock, or injury to persons: • Do NOT dismantle. • Do NOT alter power cord. • Turn off/unplug and a...

Page 4 - GETTING STARTED; Main Parts & Controls; DO

4 GETTING STARTED Main Parts & Controls A. Lamp Head B. Gooseneck C. Shaft D. Lamp Base E. Power Cord F. Polarized Plug G. Parabolic Grid Diffuser H. Bulb I. High/Off/Low Switch A F C E D B H Close-up of Lamp Head I G Attention! DO lift your lamp by the shaft. DO NOT lift the lamp by the goosene...

Page 5 - UNPACKING YOUR LAMP; Remove red plastic protective pieces prior to assembly.

5 1. Remove all pieces from box. Locate 2 screws and tightening tool. 2. Detach red plastic pieces and store them in the event you need to return the lamp. 3. Important: To avoid scratching the metal shaft, do not use a sharp object to cut the plastic covering. The clear plastic covering on the shaf...

Page 6 - ASSEMBLY INSTRUCTIONS; Read Instructions Carefully Before Assembly:

6 ASSEMBLY INSTRUCTIONS Read Instructions Carefully Before Assembly: 1. Remove lamp from box and packaging. Remove red plastic protective pieces from lamp shaft. NOTE: Please save original packaging for repacking should you need to return the product. 2. Set lamp base on the fl oor and insert the la...

Page 7 - ASSEMBLY INSTRUCTIONS cont.; Attaching the Parabolic Grid Diffuser

7 ASSEMBLY INSTRUCTIONS cont. 4. Attaching the Parabolic Grid Diffuser • Remove grid diffuser from protective plastic bag • Insert plastic pegs at bottom of grid diffuser into openings near bulb socket • Snap tab into place 5. Plug lamp into outlet and turn on; if bulb does not illuminate instantly,...

Page 8 - BULB REPLACEMENT INSTRUCTIONS; Removal

8 BULB REPLACEMENT INSTRUCTIONS Removal 1. Unplug lamp from power source. 2. To access to the bulb, remove grid diffuser by depressing the tab and lifting it out. (See page 7) 3. Firmly hold bulb base (B) and pull bulb (C) from the socket (A) in an outward motion. Installation 1. Unplug lamp from po...

Page 9 - TROUBLESHOOTING; Before Requesting Service on Your Verilux; • Make sure all power connectors, cords, and plugs are inserted fully

9 TROUBLESHOOTING Before Requesting Service on Your Verilux ® Lamp, Please Read the Following: • Make sure all power connectors, cords, and plugs are inserted fully and securely. • Be sure the bulb is securely seated into the socket. (See page 8) • Make sure there is power to the wall outlet or try ...

Page 10 - All moisture should be properly wiped away and dried prior to

10 CARE & CLEANING Your lamp is made from high quality materials that will last for many years with minimum care. You may want to periodically clean the lamp, using a mild non-abrasive cleaner and soft cloth. When cleaning, make sure you have turned off and unplugged the unit, and allowed suffi ...

Page 11 - WARRANTY; Three-Year Limited Warranty

11 WARRANTY Three-Year Limited Warranty ATTENTION! ONCE OPENED, PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE WHERE IT WAS PURCHASED FOR REPAIR OR REPLACEMENT! Many questions may be answered by visiting www.Verilux.com, or you may call our customer service department at 1-888-544-4865. This limited...