Verilux PL04 - Manuals - manualsarea.com

Page 3 - SAVE THESE INSTRUCTIONS; IMPORTANT SAFETY INSTRUCTIONS

3 SAVE THESE INSTRUCTIONS Thank you for purchasing the Planet Light ® Energy Saving Natural Spectrum ® Floor Lamp. Please read the following safety information before using. To reduce the risk of ﬁ re, electrical shock or injury to persons: • Do NOT dismantle. • Do NOT alter power cord. • Turn off/u...

Page 4 - GETTING STARTED; Main Parts & Controls

4 GETTING STARTED Main Parts & Controls A. Lamp Head B. Gooseneck C. Shaft D. Lamp Base E. Power Cord F. Polarized Plug G. Bulb H. On/Off Switch A F C E D B G Close-up of Lamp Head H CAUTION: DO NOT LIFT THE LAMP BY THE GOOSENECK. THE LAMP SHOULD BE LIFTED BY THE SHAFT.

Page 5 - UNPACKING YOUR LAMP; Remove red plastic protective pieces prior to assembly.

5 1. Remove all pieces from box. Locate 2 Phillips head screws. 2. Detach red plastic pieces and store them in the event you need to return the lamp. 3. Important: To avoid scratching the metal shaft, do not use a sharp object to cut the plastic covering. The clear plastic covering on the shaft is s...

Page 6 - ASSEMBLY INSTRUCTIONS

6 ASSEMBLY INSTRUCTIONS Read Instructions Carefully Before Assembly: 1. Connect the two ends of the Power Cord (between the Base and the Shaft) using the lock connectors. 2. Carefully tuck excess Power Cord into the Shaft . DO NOT CUT OR SHORTEN THE POWER CORD. 3. Insert the Flex Pole and the Shaft ...

Page 7 - ASSEMBLY INSTRUCTIONS cont.; Plug lamp into outlet and turn on. If bulb does not illuminate

7 ASSEMBLY INSTRUCTIONS cont. 5. To prevent damage during shipping, the Verilux bulb is surrounded by protective padding. Carefully remove and dispose of the protective padding. Check to ensure that the bulb is fully seated and has not come loose from the socket during shipping. There should be no g...

Page 8 - BULB REPLACEMENT INSTRUCTIONS; Removal

8 BULB REPLACEMENT INSTRUCTIONS Removal 1. Unplug lamp from power source. 2. Firmly hold bulb base (B) and pull bulb (C) from the socket (A) in an outward motion. Installation 1. Unplug lamp from power source. 2. Firmly hold base (B) and push bulb (C) into the socket (A). 3. Be sure bulb is ﬁ rmly s...

Page 9 - TROUBLESHOOTING; Before requesting service on your Planet Light; • Make sure all power connectors, cords and plugs are inserted fully

9 TROUBLESHOOTING Before requesting service on your Planet Light ® lamp, please read the following: • Make sure all power connectors, cords and plugs are inserted fully and securely. • Be sure the bulb is securely seated into the socket. (See page 8) • Make sure there is power to the wall outlet or ...

Page 11 - One Year Limited Warranty

11 One Year Limited Warranty ATTENTION! ONCE OPENED, PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE WHERE IT WAS PURCHASED FOR REPAIR OR REPLACEMENT! Many questions may be answered by visiting www.verilux.com, or you may call our Customer Service Department at 802-496-3101 during normal business hou...