Velodyne WiConnect - Manuals

www.velodyne.com WiConnect User’s Manual - 1 SET UP Place Subwoofer

www.velodyne.com 2 - WiConnect User’s Manual 1. Review the Placement Guidelines section below.2. Review the Placement Cautions section below.3. Select a subwoofer placement location based on the placement cautions and guidelines.4. Before you remove the subwoofer from the box, place the box near whe...

www.velodyne.com WiConnect User’s Manual - 3 Box Contents now that you’ve unpacked the subwoofer, make sure you have the components and Velodyne supplied accessories shown below. Also, acquire the necessary user supplied accessories. If any components or Velodyne supplied accessories are missing or ...

www.velodyne.com 4 - WiConnect User’s Manual A. cHAnnel: Select broadcast frequency. This cHAnnel selection must match cHAnnel selection on the transmitter. B. LFE INPUT: Optional wired connection to receiver, if not using the wireless connection.c. PHASE: Invert the phase of the subwoofer, if it bl...

www.velodyne.com WiConnect User’s Manual - 5 Connect Wireless Transmitter to Receiver Use one of the following two setups to connect the wireless transmitter to receiver: SETUP #1: MOST COMMON (RECEIVER LFE/SUB OUTPUT) This setup requires one RCA cable SETUP #2: LESS COMMON (NO RECEIVER LFE/SUB OUTP...

www.velodyne.com 6 - WiConnect User’s Manual SETUP #2: LESS COMMON (RECEIVER HAS NO LFE/SUB OUTPUT) 1. Use the two RcA cables supplied by you to connect the wireless transmitter’s R and l inputs to your receiver’s R and l outputs. 2. Plug the wireless transmitter’s 5V dc power adaptor into the back ...

www.velodyne.com WiConnect User’s Manual - 7 Select Receiver Options Optimal Subwoofer Performance It is important that the audio system’s existing receiver is set up correctly to work in concert with the subwoofer. To set up the receiver refer to its instruction manual and use one of the following ...

www.velodyne.com 8 - WiConnect User’s Manual Connect Subwoofer 1. Use the included power cord to connect the subwoofer to a power outlet.2. Turn the POWeR switch to the On position. The AcTIVe light should be yellow. NOTE: After 12 minutes without receiving a signal, the AcTIVe light turns red to in...

www.velodyne.com WiConnect User’s Manual - 9 Adjust Subwoofer Controls for Listening Preferences now it’s time to adjust the subwoofer controls to match your listening environment and preferences. 1. Play some music through your receiver.2. Turn the subwoofer’s VOlUme to a level that balances with t...

www.velodyne.com 10 - WiConnect User’s Manual Move Test In this test, you stay in one listening spot and you move the subwoofer around the room. To do the “move Test”: 1. Place the subwoofer in a new location in the room.2. Sit in the seating location you use most often.3. Play some music on the aud...

www.velodyne.com WiConnect User’s Manual - 11 Use the Subwoofer’s LFE Input (Optional) In case you misplace the wireless transmitter or the wireless transmitter malfunctions, you can also connect the subwoofer to your receiver with an RcA cable. 1. Use the RcA cable, supplied by you, to connect one ...

www.velodyne.com 12 - WiConnect User’s Manual Mount Wireless Transmitter on Wall (Optional) Optionally, you can mount the wireless transmitter on the wall or place in a location that better organizes your audio components. The transmitter doesn’t have to be visually in view in the room to function p...

www.velodyne.com WiConnect User’s Manual - 13 MAINTAIN Protect Subwoofer from Damage dO nOT PUT HeAVy OBJecTS On TOP of the subwoofer cabinet or wireless transmitter that could scratch or dent the cabinet or case. dO nOT AllOW OBJecTS TO FAll InTO OR lIQUIdS TO SPIll On THe SUBWOOFeR enclOSURe. dO n...

www.velodyne.com 14 - WiConnect User’s Manual Troubleshoot IF THe SUBWOOFeR’S AcTIVe lIGHT ISn’T yellOW OR Red: 1. Verify that the subwoofer is plugged into a live power outlet.2. Verify that the subwoofer’s POWeR switch is in the On position.3. Verify that the power cord is not damaged. If damaged,...

www.velodyne.com WiConnect User’s Manual - 15 RESOURCES Specifications Model WiC-10 Woofer 10” downward firing (7.65” piston diameter) Amplifier: Class D 200 Watts Dynamic, 125 Watts RMS Power Magnet Structure 2 lbs. (0.9 Kg) Frequency Response 33 Hz – 140 Hz (+/- 3 dB) Voice Coil: 1.6” copper wound...

www.velodyne.com 16 - WiConnect User’s Manual REGULATORy INFORMATIONFCC Compliance Statement This device complies with part 15 of the Fcc Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and2. This device must accept any interference rec...

www.velodyne.com WiConnect User’s Manual - 17 FOR YOUR RECORDS DATE/PLACE OF PURCHASE: PROdUcT mOdel: PROdUcT SeRIAl nUmBeR: NOTE: If you need to file a warranty claim for your product, you will still need to submit to Velodyne the original sales invoice or other proof of ownership and date of purch...