VDO Z3 PC - Manuals

Picturebook P06 UNLOCK LOCK 1.LOCK 2.CLICK 2.UNLOCK

Picturebook P08 ONLY FOR MODELS Z2/Z2 PC-LINKZ3/Z3 PC-LINK

5 INSTRUCTION MANUAL TABLE OF CONTENT 1.1. GENERAL 1.2. IMPORTANT INSTRUCTIONS FOR THE DIGITAL WIRELESS SYSTEM 1.3. Control system - operation 1.3.1. Operating mode 1.3.2. Setting mode 1.4. The display 1.5. Extension options & accessories 2. INSTALLATION 2.1. Battery installation 2.1.1. Battery ...

7 INSTRUCTION MANUAL 18. GUARANTEE CONDITIONS 19. TECHNICAL SPECIFICATIONS 1.1. GENERAL 1.2 IMPORTANT INSTRUCTIONS FOR THE DIGITAL WIRELESS SYSTEM Your VDO series Z works entirely without cable; it works with triple digital wireless transmission based on well-established ANT+Sport® wireless protocol...

8 EN K 1.3.1. OPERATION MODE - use this mode to display all informationButton assignment is shown on the housing. OPERATION MODE Z3 PC-LINK ALTI UP DIST UP TRIP MAX AVG CLIMB MAX CLIMB TOTAL UP (1 or 2) ALTI MAX (1 or 2) ALTI DOWN DIST DOWN AVG DOWN MAX DOWN TOTAL DOWN (1/2) TRIP DIST RIDE TIME AVG ...

9 INSTRUCTION MANUAL 1.3.2. SETTING MODE - use this mode to make all settings. The assignment of buttons is on the buttons To go to setting mode: Press button ç for 3 seconds SETTING MODE Z3 PC-LINK or Chap. 8.1.Chap. 8.2.Chap. 8.3.Chap. 8.4.Chap. 6.1.Chap. 10.Chap. 5.4.Chap. 7.5.Chap. 3.3.Chap. 15....

15 INSTRUCTION MANUAL In this case your VDO computer will show dashes for the respective function in the display. To re-open all receive channels press the ç and ¥ buttons at the same time: Now your VDO computer will again receive all previously paired transmitters that are in range. 4. GENERAL SETT...

19 INSTRUCTION MANUAL 7.PULSE FUNCTION SETTINGS The pulse functions of your VDO computer are based on the speci fi ca- tion of three training programs each with 3 training ranges.Limit 1 = program 1: for recovery training (high 70%, low 50% of max. pulse)Limit 2 = program 2: program for endurance tr...

21 INSTRUCTION MANUAL Power is calculated in WATT via a mathematical algorithm. Deviations from a real WATT measurement system are possible, particularly if there is a strong headwind or tailwind. The more precise the setting of the bicycle used, (its weight as well as your seat position), the more ...

23 INSTRUCTION MANUAL ∂ ƒ ALTI DOWN SET ‚ ALTI DOWN 1 SET (for bike 2 or walking ƒ ALTI DOWN 2 SET / WALK DOWN SET) ‚ ALTI DOWN 1 NEXT DIGIT / ALTI DOWN 2 NEXT DIGIT / WALK DOWN NEXT DIGIT ∂ ƒ Set last digit (keep button depressed for fast run-through) ‚ ... repeat for all digits from back to front ...

25 INSTRUCTION MANUAL 11. OPERATION MODE 11.1. An overview of mode functions is provided in section 1.3.1.11.2 FAST PAIRING after transmission interruptionIf no signal is received from one of your already paired transmitters for more than 15 minutes (e.g. cycling without pulse-chest belt, magnet mov...

27 INSTRUCTION MANUAL 11.3.10. ¬ AVG DOWN = average downhill slope in percentDisplay ¥ „Dschn down“ Reset: 3 sec. √ TRIP DATA ?RESET? ‚ TRIP DATA ?RESET? <<?RESET? >> fl ashing ‚ TRIP DATA RESET DONE This resets all data of the functions marked by L Automatic return to operation mode for...

28 EN 11.3.16. ¬ MAX SPEED = maximum speed of the actual tripDisplay ç MAX SPEED Reset: 3 sec. √ TRIP DATA ?RESET? ‚ TRIP DATA ?RESET? <<?RESET? >> fl ashing ‚ TRIP DATA RESET DONE L Automatic return to operation mode for TRIP DISTMaximum value 120 km/h or mph. Accuracy 2 decimal places....

29 INSTRUCTION MANUAL 11.3.20. ¬ ODO BIKE 2 = total distance bike 2Shows the total of all distances ridden with bike 2 in km or mi (auto-matic conversion of all values when switching to mi)Display √ ODO BIKE 2 Maximum value: 99,999 km or mi 11.3.21. ¬ ODOTOTAL = total distance bike 1 and bike 2 Show...

31 INSTRUCTION MANUAL 11.3.33. ¬ £ RECOV TIME or RECOV PULSE = recovery time and recovery pulse measurementPrerequisite: Only if recovery time/recovery pulse is de fi ned, chapter 7.2Starting the measurement ç + √ press simultaneously Displaying the information ≈ RECOV TIME or RECOV PULSE Reset: ∫ P...

35 INSTRUCTION MANUAL 14. TRAINING CONTROL WITH THE PULSE FUNCTIONS See chapter 13 for information on making the settings. For focused training control it is necessary to keep the pulse in certain ranges through speci fi c stress, see chapter 7.2. The different training programs are de fi ned by a l...

38 EN Press concurrently: ¥ + ≈ End lap 1 and start lap 2 concurrently Start next lap: ¥ + ≈ End lap 2 and start lap 3 concurrently... Interrupt: ∫ Interrupt lap measuring (e.g. for recovery lap or break) You can interrupt each lap as often as desired, or end the lap and record up to 50 individual l...

45 INSTRUCTION MANUAL 19. TECHNICAL SPECIFICATIONS Computer: Approximately 49.6 x 46.6 x 16.5 mm, weight: Approximately 45 gHandlebar holder: Weight approximately 15 gSpeed transmitter: Weight approximately 20 gPulse transmitter: Weight approximately 80 gBattery: 3V, type 2032 (computer); type 2032 ...

66023 66023 ADDENDUM TO USER MANUAL USA CDN NOTICE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential install...

F O R R U N N I N G / H I K I N G V D O S E R I E S - Z w w w . v d o c y c l e c o m p u t i n g . c o m C Y C LE C OMPUTING