Page 2 - Let’s talk safety
Basic safety precautions Don’ts Let’s talk safety This steam mop is intended for household use only and NOT for commercial or industrial use. • Only use the steam mop indoors away from rain and moisture and keep the area you’re cleaning well lit • Turn OFF the on/off switch on the steam mop controls...
Page 3 - Thank you for buying this Steam Fresh Combi; We’re here if you need us; For troubleshooting simply visit or call:; Do’s
Thank you for buying this Steam Fresh Combi Taking care of your sealed hard floors and surfaces The Steam Fresh is designed to make steam cleaning your sealed hard floors regularly, as effective and efficient as possible, and this user guide will help you get the most out of your machine.Maintaining...
Page 5 - Technical Specification
Contents Getting to know your machine Handle release button Detergent trigger (hidden) Handle Steam ready indicator On/Off switch Handheld steam trigger Name Stream Fresh Combi Voltage 220-240V Wattage 1600W Cord length 8m Weight 3.7kg Technical Specification Subject to technical change without noti...
Page 6 - Assembling your steam mop; Getting started
Push the main body down into the floor head until it clicks into place Push the handle into main body until it clicks into place To stand the steam mop upright push handle until clicks into place Assembling your steam mop Getting started Using your machine PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGI...
Page 7 - Filling water tank
Getting started Using your machine Press the water tank release buttons and pull the water tank to remove Slide the water tank back into the machine until it clicks into place Pull the tab on the water tank cap to open Fill the water tank with 260ml of water, replace the cap and push firmly to close...
Page 8 - Using the steam mop
Using your machine Using your machine • The steam mop and accessories get very hot during use, always allow them to cool down before handling. • Always unplug and switch off the steam mop when assembling and filling water & solution tank.• Always switch off the steam mop before emptying the wate...
Page 9 - Refreshing carpets
Using your machine Using your machine To produce steam squeeze the trigger. To prevent overly wetting the carpet, avoid holding the trigger continuously Move the steam mop slowly backwards and forwards across the carpet paying particular attention to high traffic areas* To release the carpet glider,...
Page 10 - Using the handheld steamer
Using your machine Using your machine WARNING: Always switch off the handheld steamer before attaching the concentration nozzle and accessories. Remove water tank and refill before use When using the handheld always attach the concentration nozzle or hose. Push the concentration nozzle/hose onto the...
Page 11 - Using the tools
Using your machine Using your machine IMPORTANT: Taps should be turned off when steaming around them. Don’t steam clean ovens, oven surfaces or grills when hot. Allow to cool to room temperature. Ideal for any surface from tiles, sinks, toilets and oven tops Use to remove soap scum in baths and show...
Page 12 - Emptying the water tank; Taking care of your machine; Emptying the detergent tank
Taking care of your machine Press the water tank release button and lift the water tank by the handle Emptying the water tank Pull the tab on the water tank to open Hold corner of pad down with foot and lift steam mop to peel away All cleaning pads are machine washable (Max 40’C) allow to fully dry ...
Page 13 - Replacing the hard water filter; Removing blockages
Taking care of your machine Replacing the hard water filter Pull to remove the hard water filter New filter (beige/cream colour) Hard water filter should be replaced every 3 to 6 months or if discoloured Remove the water tank to access the hard water filter Taking care of your machine 3-6 Months IMP...
Page 14 - Solution; What to do if it goes wrong
• Check the ‘This pack contains’ panel on the box to make sure the part is included with your machine. • Check the On/Off switch is in the On position. • The cleaning pad may already be saturated or dirty, wash the cleaning pad. Go to the ‘Taking care of your machine’ pages. • There may be no water ...
Page 15 - Getting in touch
• There may be no water in water tank, check the water tank has water. * Calls are charged at the standard local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling. Getting in touch