Page 2 - TABLE OF CONTENTS
2 TABLE OF CONTENTS SAFETY NOTICE 03 PRE INSTALLATION 06 NECESSARY TOOLS 08 PARTS INCLUDED 09 PARTS LIST 09 INSTALLATION PROCEDURE 10 OPERATING INSTRUCTIONS 15 TROUBLESHOOTING 15 MAINTENANCE 16 TECHNICAL SPECIFICATIONS 17 WIRING DIAGRAM 17 PARTS DIAGRAM AND LIST 18 WARRANTY 20 APPLIANCE INFORMATION ...
Page 3 - SAFETY NOTICES; Please read these instructions completely before starting.
3 SAFETY NOTICES Approved for residential type units for residential use only read these instructions and be safe. Please read these instructions completely before starting. The installation of the appliance must respect all codes. Important: Save these instruction so that you can provide the electr...
Page 6 - PRE INSTALLATION; CAUTION
6 PRE INSTALLATION CAUTION Due to the weight and size of these vent hoods and to reduce the risk of personal injury or damage to the product, TWO, TO THREE PEOPLE ARE REQUIRED FOR PROPER INSTALLATION. • Please read the instructions carefully. Unpack the range hood and check that all functions are wo...
Page 7 - MEASUREMENTS
7 PRE INSTALLATION 680 mm (26.75”) 723 mm (28.5”) 755 mm (29.75”) 750 mm (29.5”) 305 mm (12”) 558.8 mm (22”) 254.3 mm (10”) 750 mm (29.5”) 750 mm (29.5”) 723 mm (28.5”) 558.8 mm (22”) 558.8 mm (22”) 220 mm (8. 75”) 45.8 mm (1. 75”) 755 mm (29.75”) 755 mm (29.75”) 680 mm (26.75”) 254.3 mm (10”) 254.3...
Page 8 - DUCT PLANNING; WARNING; NECESSARY TOOLS
8 PRE INSTALLATION DUCT PLANNING • The ventilation hood is equipped for 8” round ducts. This hood can be ventilated vertically through the top cabinet or ceiling. A duct transition piece is provided for vertical exhaust. You can use elbows (sold separately) to ventilate horizontally through the rear...
Page 9 - (use only if not installing into the top cabinets); (Sold separately for rear wall installation)
9 PARTS INCLUDED PARTS LIST A) Metal anchors (concrete installations) - 4 pcsB) Damper Flap - 1 (could be attached to range hood) C) Plastic Anchors (drywall installations)- 10 pcsD) ST4*4 x 35 mm wood screws - 10 pcsE) ST4*4 x 12 mm metal screws - 4 pcs (use only if not installing into the top cabi...
Page 10 - INSTALLATION PROCEDURES; Caution: The range hood has sharp edges; Please wear protective work gloves to remove parts,
10 INSTALLATION PROCEDURES MIN. 24” MAX. 36” MIN. 24” MAX. 36” Caution: The range hood has sharp edges Please wear protective work gloves to remove parts, installation, cleaning and servicing. Step 1: • Connect the Duct into the Damper. • Secure the Duct around the Damper with the Duct Clamp. Import...
Page 11 - When installing the hood, the height should not be too
11 INSTALLATION PROCEDURES Step 2: Caution: When installing the hood, the height should not be too high or too low. Before the installation, please inspect the maximum height of your ceiling and bonnet. Too high, will affect the efficiency of the hood; too low, stove temperature will damage some par...
Page 12 - INSTALLATION PROCEDURE; Top and rear mount
12 INSTALLATION PROCEDURE Top and rear mount installation Due to the weight of the unit, it is recommended to mount the hood at the bottom of the upper cabinet and then fi x it to the wall to avoid gaps.1. Use the installation template cut-outs to mark the necessary holes on the back and top of the ...
Page 13 - THESE STEPS REQUIRE LIFTING AND HANGING AT THE SAME; lining up to holes with the protruding wall screws.
13 INSTALLATION PROCEDURE THESE STEPS REQUIRE LIFTING AND HANGING AT THE SAME TIME - USE TWO/THREE PEOPLE 6. Locate the top (cabinet) holes and line up hood holes, while also lining up to holes with the protruding wall screws. 7. Fasten the hood to the bottom of the cabinet by tightening screws with...
Page 14 - Metal Filter Installation
14 INSTALLATION PROCEDURE Metal Filter Installation 1. Install the Drip Tray inside the bottom rear of the range hood. (Fig 1)2. Install the filters by inserting at an angle towards the rear of the range hood. (Fig 2) 3. Push the filter up and insert front of filter into front recess. (Fig 3) 4. Sli...
Page 15 - OPERATING INSTRUCTIONS; Touch Controls; starts and F5 light automatically but does not blink.; TROUBLESHOOTING; PROBLEM
15 Function Buttons: OFF F1 OFF LOW SPEED F2 MEDIUM SPEED F3 HIGH SPEED F4 LED LIGHT F5 F1 F2 F3 F4 F5 OFF OPERATING INSTRUCTIONS Touch Controls Fan Buttons: Power on by pressing any button of F2/F3/F4, fan starts and F5 light automatically but does not blink. TROUBLESHOOTING PROBLEM CAUSE SOLUTION ...
Page 16 - MAINTENANCE; CAUTION: NEVER PUT YOUR HANDS INSIDE THE RANGE HOOD
16 MAINTENANCE CAUTION: NEVER PUT YOUR HANDS INSIDE THE RANGE HOOD WHILE IT IS IN OPERATION. CLEANING For best performance, clean the range hood regularly. 1. Use only mild soap or cleaning solutions to clean the exterior surface of the range hood. Use a soft cloth to dry the surface. 2. Stainless S...
Page 17 - speed power control
17 WIRING DIAGRAM TECHNICAL SPECIFICATIONS MODEL UGP-30 CR RH RATED POWER 240W RATED VOLTAGE 110~120V CONTROLS 3 speed power control NOISE LEVEL Below 65 dBA LIGHTS 1.5W LED Lamps x 2 CLEANING Dishwasher safe stainless steel baffle filters DIMENSIONS W 29.5” x H 10” x D 22” WEIGHT (UNBOXED) 53 lbs /...
Page 18 - PARTS DIAGRAM AND LIST
Page 22 - Please record the following information for future reference:; PRODUCT REGISTRATION; Please visit our website at
22 NOTES APPLIANCE INFORMATION (manual copy - keep with your records) Please record the following information for future reference: Model: Serial Number: Purchased From: Date Purchased: PRODUCT REGISTRATION Please visit our website at www.uniqueappliances.com/product-registration/ to register your p...
Page 23 - available during regular business hours,; Website; CONTACT US; or the purchase of your range hood, please contact our customer
23 Toll-free 1-877-427-2266 or 1-905-827-6154 available during regular business hours, 8:30 am to 4:30 pm, EST Website www.uniqueappliances.com Email [email protected] CONTACT US For general information or questions related to the operation, safety or the purchase of your range hood, please contact ...
