Uniden UH770NB - Manuals

Uniden UH770NB – Manual in PDF format online.

Manuals:

Manual

Manual Uniden UH770NB

Summary

Page 2 - Contents

Introduction 3 Controls & Connectors 4 Indicators 6 Included with your UH7700NB Transceiver 7 Connecting the Microphone 8 Mounting the MIC Hanger 9 Operation 10 Turning on the Power 10 Setting the Squelch Level 10 Monitor 12 Selecting a Channel 12 Programming the Instant Priority Channel 12 Reca...

Page 3 - Features; Introduction

The Uniden UH7700NB is designed to provide you with years of trouble free service. Its rugged components and materials are capable of withstanding harsh environments. Please read this Operating Manual carefully to ensure you gain the optimum performance of the unit. NOTE The citizen band radio servi...

Page 4 - Controls & Connectors

4 Controls & Connectors 6 8 9 10 7 2 5 4 3 1 13 15 16 14 11 12 UNIDEN UH7700NB UHF CB Transceiver CALL INST UH7700 NB Series Standard Microphone

Page 5 - RJ45 type plug

1 Menu Button / Monitor function (press & hold) 2 PUSH control - Squelch Select (press) /Power On/Off (press & hold) ROTARY control - CHANNEL Selector 3 / - Volume Up/Down control 4 Channel Scan button / Scan Memory (press & hold) 5 Liquid Crystal Display (LCD) 6 MIC - Front Microphone J...

Page 6 - - Transmit Signal Power Level; Indicators

1 - Receive Signal Level (Channel Busy Indicator) - Transmit Signal Power Level 2 - Channel Number / Menu Item Setting 3 - CTCSS/DCS Code number / Menu Item 4 - Scan mode 5 - Channel in Memory 6 - Instant Channel 6 Indicators 2 3 4 1 6 5 UNIDEN UH7700NB UHF CB Transceiver

Page 7 - Optional Accessories:; • BTMIC kit; Included with your UH7700NB Transceiver

Optional Accessories: • BTMIC kit • UHF Antenna • External Speaker Visit the UH7700NB page on the website for more information on the availability of optional accessories; www.uniden.com.au for Australia www.uniden.co.nz for New Zealand Standard Microphone Owner’s Manual Microphone Hanger with screw...

Page 8 - MIC Jack; seal the MIC jack entry from dust.; Disconnecting the MIC from the MIC Jack; Pull back the rubber cover and move it down along the cord. Using the; Connecting the Microphone

MIC Jack Push the MIC plug at the end of the microphone into the MIC jack until the connection locks into place. Gently tug the MIC cord to test that the connection is locked. Use the rubber cover which is on the MIC cord to seal the MIC jack entry from dust. Disconnecting the MIC from the MIC Jack ...

Page 9 - onto the flat area of the MIC; Mounting the MIC Hanger

The Microphone Hanger comes in two parts. How and where you mount the MIC hanger will determine which parts to use. Conventional Mounting with Screws Use the front part of the MIC Hanger only. Locate a suitable mounting position and mark and drill two 3mm holes. Fix the MIC Hanger into place with sc...

Page 10 - Turning on the Power; Operation; dc HI; Setting the Squelch Level; SqL

10 UNIDEN UH7700NB UHF CB Transceiver Turning on the Power Press and hold the Power/Channel Selector. Operation NOTE Low-Voltage/High-Voltage Alert If the power supply voltage exceeds 18VDC, an alert tone sounds and dc HI flashes for 5 seconds. The power source must not exceed 25VDC otherwise perman...

Page 12 - Monitor; selection is printed on page 23. For Australia, Channels 05; Programming the Instant Priority Channel

12 UNIDEN UH7700NB UHF CB Transceiver Operation Monitor Press and hold to open the squelch and receive all weak signals. Press and hold again to cancel. Selecting a Channel Turn the Channel Selector to select the desired channel. NOTE For your reference a list of the available channels, correspondin...

Page 13 - Recalling the Instant Channel; Call Function; be transmitted. You may select from 5 types of tones (see p.18 for; Using Repeater Channels

13 Operation Recalling the Instant Channel Momentarily press [INST] on the microphone at any time to return to the Instant Channel. Press [INST] again to return to the previous channel. Transmitting The UHF CB Radio uses UHF-CB Channels. NOTE For your reference a list of the available channels, corr...

Page 14 - Standard Operation without the aid of a Repeater station.; If you transmit on CH01 Duplex mode, you are actually transmitting

14 UNIDEN UH7700NB UHF CB Transceiver Operation Standard Operation without the aid of a Repeater station. Operation with the aid of a Repeater Repeater Station (Duplex). The signal coming from your radio is received by the Repeater Station and the re-transmitted at the same time on another channel. ...

Page 15 - Operating the UHF CB Radio in Duplex Mode; For this example we are adopting CH01 as the channel being used in; Scanning; Group Scanning (GS), to give you flexibility and allow you to use the

15 Operation Operating the UHF CB Radio in Duplex Mode For this example we are adopting CH01 as the channel being used in your area for repeater use. 1. Press 2 times. The duplex setting flashes. 2. Turn the Channel Selector or press / to change the setting between simplex and duplex (“ r ” for repe...

Page 16 - Scn

16 UNIDEN UH7700NB UHF CB Transceiver Operation 2. To deactivate SCAN, press . Open Scan (OS) Mode Allows continuous scanning of all selected channels. If an active channel is found, scanning will stop on that channel. If the received signal ceases, the unit will wait 3 seconds for the signal to ret...

Page 17 - Scanning continues after 3 seconds. If scanning stops on a channel; Add/Remove Channels from SCAN Memory; oF

17 Operation If the Priority Channel becomes active the radio will stay on that channel for as long as the signal is present. If the received signal ceases, Priority Scanning continues after 3 seconds. If scanning stops on a channel which is not a Priority Channel, the radio will continue monitoring...

Page 18 - Busy Channel Lockout

18 UNIDEN UH7700NB UHF CB Transceiver Operation Busy Channel Lockout If the channel is already in use, you can prevent the UHF CB Radio from transmitting . This is particularly important when using CTCSS/DCS. 1. Press 4 times. The BCL setting flashes. 2. Turn the Channel Selector or press / to chang...

Page 19 - Roger Beep; times. The roger beep setting flashes.; Backlight Colours

19 Operation Roger Beep 1. Press 6 times. The roger beep setting flashes. 2. Turn the Channel Selector or press / to change the setting between ON or OFF. 3. Press to store the setting. 4. Press and hold to save & exit menu mode. Beep On/Off 1. Press 7 times. The Beep setting flashes. 2. Turn th...

Page 20 - Backlight Brightness; times. The Backlight Brightness setting flashes.; LCD Flip; Turn the Channel Selector or press

20 UNIDEN UH7700NB UHF CB Transceiver Operation Backlight Brightness 1. Press 9 times. The Backlight Brightness setting flashes. 2. Turn the Channel Selector or press / to change the setting between Off (oF), 1(Lo), 2(mid) and 3(Hi).3. Press to store the setting. 4. Press and hold to save & exit...

Page 21 - CTCSS codes table

21 CTCSS codes table UNIDEN UH7700NB UHF CB Transceiver Code No. Frequency (Hz) Code No. Frequency (Hz) “oF’ OFF 20 131.8 1 67.0 21 136.5 2 71.9 22 141.3 3 74.4 23 146.2 4 77.0 24 151.4 5 79.7 25 156.7 6 82.5 26 162.2 7 85.4 27 167.9 8 88.5 28 173.8 9 91.5 29 179.9 10 94.8 30 186.2 11 97.4 31 192.8 ...

Page 22 - DCS codes table

22 UNIDEN UH7700NB UHF CB Transceiver DCS codes table Code No. DCS Code (Octal) Code No. DCS Code (Octal) Code No. DCS Code (Octal) 1 023 36 223 71 445 2 025 37 225 72 446 3 026 38 226 73 452 4 031 39 243 74 454 5 032 40 244 75 455 6 036 41 245 76 462 7 043 42 246 77 464 8 047 43 251 78 465 9 051 44...

Page 23 - UHF CB Channel Guidelines

23 UHF CB Channel Guidelines NOTE Always listen on a channel (or observe the receive signal level meter) to ensure it is not already being used before transmitting. Channels 5 and 35 are used for emergency channels. CTCSS and DCS will not operate on these channels.Please follow these guidelines for ...

Page 24 - UHF CB Channels & Frequencies

24 UNIDEN UH7700NB UHF CB Transceiver UHF CB Channels & Frequencies CH No. Simplex Mode Transmit / Receive Frequency (MHz) Duplex Mode Transmit Frequency (MHz) CH No. Simplex Mode Transmit / Receive Frequency (MHz) 1 476.425 477.175 (CH31) 21 476.925 2 476.450 477.200 (CH32) 22 476.950 (RX only)...

Page 26 - Warranty; UNIDEN UH7700NB UHF CB Transceiver; for warranty service

26 Warranty UNIDEN UH7700NB UHF CB Transceiver UNIDEN UH7700NB UHF CB Transceiver IMPORTANT: Satisfactory evidence of the original purchase is required for warranty service Please refer to our Uniden website for any details or warranty durations offered in addition to those contained below. Warranto...

Page 27 - Statement of Remedy:; Procedure for obtaining warranty service:; UNIDEN NEW ZEALAND LTD

27 Warranty UNIDEN UH7700NB UHF CB Transceiver Statement of Remedy: If the Product is found not to conform to this warranty as stated above, the Warrantor, at its discretion, will either repair the defect or replace the Product without any charge for parts or service. This warranty does not include ...

Page 28 - THANK YOU FOR BUYING A UNIDEN PRODUCT.