Uniden UH075 - Manuals - manualsarea.com

Page 2 - This is NOT a rating that allows for the unit to be submersed.; LITHIUM ION BATTERY PACK WARNING; This equipment contains a Lithium Ion Battery Pack.

WATERPROOF: JIS4 Uniden's UH075 radio is designed to meet the water proofing standard of JIS4. This Means: "...the unit is able to withstand a steady stream of water from a hose for 5minutes without leakage..." The UH075 will only meet this rating if fully assembled and all rubber sealsand b...

Page 3 - CONTENTS

CONTENTS Introduction Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Included in your Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Getting Started Mounting the Drop-in Charger . . . . . . . . . ....

Page 4 - FEATURES; INTRODUCTION

2 The UH075 is a JIS4 Waterproof, portable two-way UHF-CB radio. It is compact,rugged and fits easily in your hand. This hand held UHF radio will give youconsistent, outstanding performance in virtually all conditions and situations. Toensure that you get the most from the UH075 features, please rea...

Page 5 - INCLUDED IN YOUR PACKAGE

3 INCLUDED IN YOUR PACKAGE Drop-in Charger (DT075) Beltclip Wrist Strap Lithium Battery (BP075) AC Adapter (AAD-075S) UH075 Antenna Reference Guide/ Printed Material Mounting Screws If any of these items are missing from the box, contact your Uniden Dealer, immediately. UT01913ZZ_1 11/21/03 5:50 PM ...

Page 6 - GETTING STARTED; Mounting the Drop-in Charger; Plug one end of the AC adapter into the wall outlet; Attaching the Antenna

4 GETTING STARTED Mounting the Drop-in Charger 1. Mount the drop-in charger to either a table or wall. Table:Attach the drop-in charger using the mountingscrews and washers. Wall:Insert the two mounting screws into the wallkeeping the same space as the holes on thecharger. Place the charger with the...

Page 7 - Attaching the Battery Pack; Place the battery pack onto the back of the; Attaching the Beltclip; Apply it to the hanger piece on the back of; F) may cause the battery to

5 Attaching the Battery Pack 1. Place the battery pack onto the back of the radio. It will only fit in one way. 2. Snap the battery release clip until it clicks. Be sure the battery pack fits tightly againstthe UH075 body. Attaching the Beltclip 1. Hold the beltclip in the direction. 2. Apply it to ...

Page 8 - Charging the Battery Pack; The red LED illuminates and stays ON, until fully; Do not transmit when the UH075 is in the drop-in charger!; To take the beltclip off the radio, turn it

6 Charging the Battery Pack Your radio is powered by a specially designed Lithium Ion battery pack. • Before operating the UH075, charge the Lithium Ion battery pack for 5hours without interruption in the drop-in charger. 1. Place the UH075 in the drop-in charger. 2. The red LED illuminates and stay...

Page 9 - Battery Level Display; When; Receive

7 Battery Level Display The BATTERY icon in the top right hand corner of the screen indicates the UH075 current battery voltage level at all times. The battery level is displayed in 4 levels. LEVEL 4Battery 100% full LEVEL 3Battery approx. 40% capacity LEVEL 2Low Battery LEVEL 1 (flashing)Empty Batt...

Page 10 - OPERATION; ADJUSTING THE KEY BEEPS; To turn; To turn; ON; VOLUME

8 OPERATION POWER ON/OFF To turn the unit ON , rotate the [ON/OFF VOL] clockwise. A channel number and battery levelshould appear on the display. To turn the unit OFF , rotate the [ON/OFF VOL] knob counter-clockwise. The display will disappear. ADJUSTING THE KEY BEEPS Your radio emits a beep each ti...

Page 11 - ROGER BEEP; SELECTING CHANNEL; If you press and hold the

9 ROGER BEEP Roger Beep is a BEEP that is sent to notify the end of transmission (both PTTand VOX transmission.) Roger Beep can be heard through the speaker whenKey Beep is on. Roger Beep is transmitted even if key beep is turned off.However Roger Beep will not be heard from the speaker. To turn OFF...

Page 12 - SQUELCH; clockwise

10 SQUELCH The squelch is used to eliminate any annoying background noise when thereare no signals present. Think of squelch as a gate. Turn [SQ] fully clockwise. This raises the "Squelch Gate" so highthat only the very strong signals can get through. Turn [SQ] fully counter clockwise until ...

Page 13 - TO TRANSMIT AND RECEIVE; LOW; When you have finished speaking, release the; TX

11 TO TRANSMIT AND RECEIVE The UH075 uses the 40 UHF-CB Channels. For your reference a list of the available channels and corresponding frequencies is printed at the end of thismanual. 1. The maximum RF transmit power of UH075 is 5 watts. To switch to low power, press . LOW appears on the LCD. To sw...

Page 14 - USING A REPEATER CHANNEL; Standard Operation without the aid of a Repeater Station

12 USING A REPEATER CHANNEL UHF CB Repeaters are used to retransmit or relay your signal. Repeaters willextend the range of your radio and overcome the shielding effect caused bysolid obstructions. In normal Simplex operation, your radio transmits on one particular frequencyand receives on that same...

Page 15 - TO OPERATE UH075 IN DUPLEX MODE; DUP; SCANNING; Example: CH40 becomes active; Check with your local retailer for available repeaters.

13 TO OPERATE UH075 IN DUPLEX MODE Eg. CH01 is being used in your area for repeater use. Press momentarily. The DUP icon appears. Press again to deactivate the duplex operation. UH075 will return to simplex operation. dup dup SCANNING The UH075 has two types of scanning; Open Scanning (OS) and Group...

Page 16 - GS

14 Group Scan (GS) Mode Allows you to monitor a Priority Channel while scanning. To use GS Mode Scanning, press the key. GS icon appears on the display. GS Scanning checks the Priority channel activity regularly. os/gs If SCAN is deactivated while in an active channel, the UH075 willstay on that act...

Page 17 - Programming Scan Channels; OS is indicated by the absence of the GS icon.; MEM; PRIORITY CHANNEL; Choosing a Priority Channel

15 Programming Scan Channels 1. Select which Scanning Mode you wish to use OS or GS Mode. OS is indicated by the absence of the GS icon. 2. Select the channel you want to store by pressing or . 3. Press and hold for 1.5 secs. to store. MEM icon appears and two short tone beeps are heard. 4. To remov...

Page 18 - Programming CTCSS Code; ADVANCED FEATURES; CTCSS

16 Programming CTCSS Code 1. Select a desired channel to be used with CTCSS . 2. Press and hold for 1.5 secs. CTCSS icon blinks. 3. Press or to select the desired CTCSS code. 4. Press to save the selected code. CTCSS icon stops blinking. UH075 will return to standby mode after 10 secs. of no activit...

Page 19 - will cause the unit to transmit briefly.; To activate VOX; or; VOX

17 VOX feature will not work without the Vox Headset Microphone.The built in mic of UH075 is temporarily disabled, howeveraccidental pressing of will cause the unit to transmit briefly. PTT Changing the VOX sensitivity setting to "oF" without removing themicrophone will cause the unit to tra...

Page 21 - MONITOR

19 ➤ BUSY CHANNEL LOCK-OUT (BCL) This feature prevents accidental transmission on a busy channel. This is recommended on channels where CTCSS is being used. If the channel is"active" and the signal is coming from a non or different CTCSS code user theBCL feature will prevent you from transmi...

Page 22 - UHF CHANNEL & FREQUENCIES; Simplex Mode

20 UHF CHANNEL & FREQUENCIES Simplex Mode Duplex Mode CH No. Transmit / Receive Transmit Frequency (MHz) Frequency (MHz) 1 476.425 477.175 CH31 2 476.450 477.200 CH32 3 476.475 477.225 CH33 4 476.500 477.250 CH34 5 476.525 477.275 CH35 6 476.550 477.300 CH36 7 476.575 477.325 CH37 8 476.600 477....

Page 23 - VOX Headset

21 CTCSS CODES & FREQUENCIES OPTIONAL ACCESSORIES • VOX Headset • Speaker Microphone Code No. Freq. (Hz) Code No. Freq. (Hz) Code No. Freq. (Hz) 00("oF") OFF 13 103.5 26 162.2 01 67.0 14 107.2 27 167.9 02 71.9 15 110.9 28 173.8 03 74.4 16 114.8 29 179.9 04 77.0 17 118.8 30 186.2 05 79.7 ...

Page 24 - SPECIFICATIONS; General

22 SPECIFICATIONS General Channels Transmit 40 (with Duplex Channel Support)Receive 40 Oper. Temp. 0 ° C - +55 ° C Antenna Flexible Whip Microphone Built-in Electorate type Display Liquid Crystal Display Speaker 8 Ohm 1 Watt Power Source BP-075Rechargeable Lithium Ion Battery Pack850 mAh, 7.4 V Size...

Page 25 - Charger; Output

23 Audio Output Drain 0.6 W (10% THD) Current Drain Squelched 40 mA Max. Audio 170 mA Charger Std. Power Supply AAD-075SInput 230 – 240 V AC, 50 Hz Output 9 V, 210 mA Approval No. V/00031 Specifications shown are typical and subject to change without notice. UT01913ZZ_1 11/21/03 5:50 PM Page 23

Page 26 - WARRANTY; UNIDEN UH075 UHF CB RADIO; One Year Warranty

24 WARRANTY UNIDEN UH075 UHF CB RADIO One Year Warranty Note:Please keep your sales docket as it provides evidence of warranty. Warrantor: Uniden Australia Pty Limited / Uniden (NZ) Ltd. Elements of Warranty: Uniden warrants to the original retail owner for the duration of this warranty, its UH075 U...

Page 27 - CONTROLS & INDICATORS; 3 LCD Display

25 CONTROLS & INDICATORS 11 12 1314 10 15161718 19 6 8 7 9 1 2 3 4 5 1 Antenna 2 Belt Clip 3 Battery 4 Battery Release Clip 5 PTT (Push to Talk) Key 6 Memory Key (mem) 7 Scan Button (scan)/Busy Channel Lock-Out Mode (bcl) 8 TX Power/Lock Button (1/5w/lock) 9 Microphone 10 Speaker MIC (Optional) ...

Page 28 - LCD Display; Roger Beep

26 G I K L M N O P B CD A E F J H LCD Display A TransmitB 1W Power C Duplex Transmit D ScanningE MonitorF PriorityG Busy Channel Lock OutH Group Scanning I Channel Numbers J CTCSSK VOXL Roger Beep M Battery Level IndicatorN Key Lock O Memory P Receive UT01913ZZ_1 11/21/03 5:50 PM Page 26