Uniden uh064sx-2 - Manuals - manualsarea.com

Page 2 - TORS; INCLUDED IN YOUR PACKAGE:; OPTIONAL ACCESSORIES

15 14 13 21 22 17 16 18 19 24 28 20 23 25 26 27 TORS 1 Antenna 16 DCS ON Indicator 2 PTT(Push-To-Talk) Key 17 Scan Indicator 3 Monitor Key 18 Memory Indicator 4 Keylock/Call Key 19 Priority Channel Indicator 5 Memory/Scan Key 20 CTCSS ON Indicator 6 Channel/ Transmit Power Key 21 Battery Level Indic...

Page 3 - GETTING STARTED; BATTERY INSTALLATION; To avoid damage to the unit do not mix old and new batteries.; To install the batteries:; Insert NiMH battery pack according to the; OR; Align the battery cover tabs with the uh064sx tab

GETTING STARTED Uniden does not represent this product to be waterproof. Do not expose this product to Rain or Moisture. BATTERY INSTALLATION Your uh064sx unit uses the included NiMH battery pack for power. The unit can be powered with optional 4 AAA ALKALINE batteries. If you don't use the uh064sx ...

Page 4 - INSTALLING THE CHARGE CRADLE; Plug the AC adaptor into the rear of the charge cradle and into the; USER LICENCE INFORMATION; The citizen band radio service is licenced in Australia by

INSTALLING THE CHARGE CRADLE 1. Plug the AC adaptor into the rear of the charge cradle and into the mains power. 2. Place the uh064sx into the charge cradle. The charge light will come on to indicate the unit is charging. 3. Before operating the uh064sx, charge the battery pack for 16 hours. Do not ...

Page 5 - BELT CLIP; To attach the belt clip:; Slide the belt clip until it snaps into place.; To remove the belt clip:; LOW BATTERY ALERT

BELT CLIP To attach the belt clip: Slide the belt clip until it snaps into place. To remove the belt clip: To remove the belt clip, press and hold belt clip locker, slide the belt clip at the same time until released. LOW BATTERY ALERT If the battery level becomes low, the battery indicator icon on ...

Page 6 - OPERATION; VOLUME

OPERATION POWER ON/OFF 1. Press and hold select/ key to turn the radio on. A channel number will appear on the display. 2. Press and hold select/ key to turn the radio off. VOLUME 1. Press or key to increase or decrease the volume level. ‘VOL’ icon appears on the display while volume is being adjust...

Page 7 - SELECTING A CHANNEL

(6) SELECTING A CHANNEL 1. Press ch/txp key momentarily to activate channel select mode. The displayed channel will flash. 2. Press or key to select the desired channel. For your reference a list of the available channels, corresponding frequencies and guidelines for their use is printed on page 12....

Page 8 - ‘RX’; ‘RX’; mon; ‘RX’; SCANNING; To initiate scanning; key momentarily to begin scanning.; ‘SCAN’; select

AUTOMATIC SQUELCH FEATURE The uh064sx is equipped with an Automatic Squelch System which shuts off weak transmissions and unwanted noise. MONITOR This feature enables users to listen for weak signals on the current channel at the press of a key. To use monitor: 1. Press mon key. The ‘RX’ icon will f...

Page 9 - REPLY DELAY; Operation with the aid of a Repeater; appears on the display.

(8) REPLY DELAY While scanning, the uh064sx stops at a busy channel and receives a transmission. When the received signal is over, the unit will wait for 2 seconds for the return of the signal, otherwise, the radio resumes scanning. TO OPERATE IN DUPLEX MODE (REPEATERS) The Duplex function enables y...

Page 10 - CTCSS; DCS

CTCSS & DCS (Continuous Tone Coded Squelch System) & (Digital Coded Squelch) CTCSS is a feature that allows a group to talk to each other without hearing other users on the same channel. 1. Press select/ key momentarily to enter CTCSS mode. The current selected CTCSS tone flashes. 2. Press k...

Page 11 - VOX; key momentarily twice while in; ‘oF’; TRANSMITTING A CALL TONE; To select a call tone:

(10) VOX VOX is the automatic transmitting function by inputting voice intothe VOX headset mic without pressing the PTT key. 1. Press select/ key momentarily twice while in standby mode to enter VOX Sensitivity mode. The current selected VOX setting will flash on the display. 2. Press or key to adju...

Page 13 - UHF CB CHANNELS & FREQUENCIES; Simplex Mode

UHF CB CHANNELS & FREQUENCIES Simplex Mode Duplex Mode Simplex Mode CH No. Transmit / Receive Transmit CH No. Transmit/Receive Frequency (MHz) Frequency (MHz) Frequency (Mhz) 1 476.425 477.175 CH31 21 476.925 2 476.450 477.200 CH32 22 476.950 (RX only) 3 476.475 477.225 CH33 23 476.975 (RX only)...

Page 14 - CTCSS & DCS Code List

(13) CTCSS & DCS Code List (o0) (o1) (o3) (o4) (o2)

Page 15 - WARRANTY; UNIDEN UH064SX-2 UHF CB TRANSCEIVER RADIO

WARRANTY UNIDEN UH064SX-2 UHF CB TRANSCEIVER RADIO Limited One Year Warranty Please keep your sales docket as it provides evidence of warranty. Warrantor: Uniden Australia Pty Limited ABN58 001 865 498 Uniden New Zealand Limited. Warranty only available in original country of purchase.Elements of Wa...