Page 2 - Belt Clip x 4
CONTROL & INDICATORS 1 Antenna2 PTT (Push-To-Talk) Button3 Channel/scan up Key4 Channel/scan down Key5 Duplex Key6 Speaker7 Power On/Off Key8 Volume up/mon (monitor) Key 9 Volume down/mon (monitor) Key10 Microphone11 Battery Compartment Door12 Channel Indicator13 Receive Indicator14 Battery Low ...
Page 3 - GETTING STARTED; Insert 3 AAA ALKALINE batteries; BATTERY WARNING
GETTING STARTED To avoid damage to the unit do not mix old and new batteries. 1. Make sure your radio is off. 2. Remove the battery cover. 3. Insert 3 AAA ALKALINE batteries according to the polarity symbols inside the battery compartment. 4. Replace the battery cover. 2 BATTERY WARNING To retain th...
Page 4 - LOW BATTERY ALERT; To attach the belt clip:; BELT CLIP; WATER WARNING
If the Battery level becomes low, the battery indicator icon will appear on the LCD and begin flashing. LOW BATTERY ALERT The unit will go into a Battery Low Mode. The Transmit Mode is disabled. Replace the batteries immediately to continue using the radio. 3 To attach the belt clip: Slide the belt ...
Page 5 - . The channel number; OPERATION; ADJUSTING THE KEY BEEPS; Press and hold the Key while; To turn; Turn the Radio; VOLUME; The key beeps cannot permanently be disabled.
POWER ON/OFF Press and hold to turn the Radio ON . The channel number will appear on the display.Press and hold to turn the Radio OFF . OPERATION 4 ADJUSTING THE KEY BEEPS Your radio emits a beep each time one of the keys (except for the PTT button and the Key) are pressed. To turn OFF this beep: Pr...
Page 6 - activity on the selected channel.
SELECTING CHANNEL Press channel or to select the desired channel. TO TRANSMIT AND RECEIVE The UH036SX uses the 40 UHF-CB Channels. For your reference a list of the available channels and corresponding frequencies is printed on page 10.1. The transmit power of the UH036SX is 500mW which willprovide a...
Page 7 - avoid touching the antenna; RANGE
For maximum range and extended the life ofthe batteries, with your hand when transmitting. avoid touching the antenna RANGE 6
Page 8 - AUTOMATIC SQUELCH FEATURE; The; MONITOR; Press and hold Volume or for 2 seconds. The
7 AUTOMATIC SQUELCH FEATURE The UH036SX is equipped with an Automatic Squelch system which shuts off weak transmissions and unwanted noise. MONITOR This feature enables users to listen in for weak signals on the current channel at the press of a button. RX To use monitor, ! Press and hold Volume or ...
Page 9 - Operation with the aid of a Repeater; SX
8 Eg. CH1 is being used in your area for repeater use.Press momentarily. The icon appears.Press again to deactivate the duplex operation. UH036SX will return to normal operation. dup dup Operation with the aid of a Repeater POWER SAVE Your UH036SX has a unique circuit designed to dramatically extend...
Page 10 - stops at a busy channel and; User License Information; Press and hold Channel or
DROP-OUT DELAY While scanning, the UH036SX stops at a busy channel and receives a transmission. When the received signal is over, the unit will wait for 2 seconds for the return of the signal, otherwise, the radio resumes scanning. User License Information The citizen band radio service is licenced ...
Page 11 - UHF CHANNELS & FREQUENCIES
UHF CHANNELS & FREQUENCIES 10 Simplex Mode Duplex Mode Simplex Mode CH No. Transmit / Receive Transmit CH No. Transmit/Receive Frequency (MHz) Frequency (MHz) Frequency (Mhz) 1 476.425 477.175 CH31 21 476.925 2 476.450 477.200 CH32 22 476.950 3 476.475 477.225 CH33 23 476.975 4 476.500 477.250 C...
Page 12 - UNIDEN UH036SX-4 UHF CB TRANSCEIVER RADIO; WARRANTY
UNIDEN UH036SX-4 UHF CB TRANSCEIVER RADIO Limited One Year Warranty Note: Please keep your sales docket as it provides evidence of warranty. Warrantor: Uniden Australia Pty Limited ABN 58 001 865 498 Uniden New Zealand Limited Warranty only available in original country of purchase Elements of Warra...