Uniden uh012sx - Manuals

TX A S C Technology Advanced Signal Clarity uh012sx 1 2 3 4 2 3 1 4 UNIDEN Model uh012sx UHF CB Radio Indicators Indicators LED It is turned on when transmitting condition. LED It is turned on when receiving a signal or decoding a CTCSS code. It blinks while receiving a signal in scan mode. LED It i...

UNIDEN Model uh012sx UHF CB Radio Included with your uh012sx Uniden Mod el uh012sx CB Radio uh012sx Owners Manual Microphone Mounting Bracket, Knobs Rubber Washer, Washer Stars And Screws Microphone Hanger, Screws and Washers 5 Optional Accessories DIN Mounting Kit (DMK8990) External Speaker (MS100)...

UNIDEN Model uh012sx UHF CB Radio Operation TX BUSY CTCSS A S C Technology Advanced Signal Clarity uh012sx CTCSS Setting the FM Squelch Turn the Unit ON by rotating the volume control clockwise. Turn the outer ring of the control to adjust the Squelch. You must select a channel which is not in use b...

UNIDEN Model uh012sx UHF CB Radio Operation Selecting a Channel Turn the Rotary Channel Selector to select the desired channel. For your reference a list of the available channels, corresponding frequencies and guidelines for their use is printed on page 10. For Australia, Channels 05 and 35 are res...

UNIDEN Model uh012sx UHF CB Radio Operation TX BUSY A S C Technolog Advanced Signal Clari CTCSS TX A S C Technolog Advanced Signal Clar CTCSS BUSY 8 Operating the uh012sx in Duplex Mode For this example we are adopting CH01 as the channel being used in your area for repeater use. Press to switch Dup...

TX A S C Technology Advanced Signal Clarity uh012sx UNIDEN Model uh012sx UHF CB Radio Operation Programming the Instant Priority Channe Recalling the Instant Channel l Turn the Rotary Channel Selector to select the Priority Channel you prefer. Press and hold for 1.5 seconds to store the new setting....

UNIDEN Model uh012sx UHF CB Radio UHF CB CHANNELS & FREQUENCIES Simplex Mode Duplex Mode Simplex Mode CH No. Transmit / Receive Transmit CH No. Transmit/Receive Frequency (MHz) Frequency (MHz) Frequency (Mhz) 1 476.425 477.175 CH31 21 476.925 2 476.450 477.200 CH32 22 476.950 (RX only) 3 476.475...

© 2005 Uniden Australia Pty Limited/Uniden New Zealand Limited Printed in China UTZZ01932ZB(0) UNIDEN uh012sx UHF CB Radio Two Year Limited Warranty Note:Warrantor: Warranty only available in original country of purchase Elements of Warranty: Warranty Duration: Parts Covered:Accessories:Statement of...

UH047SX-2 Operating Guide To bring outstanding wireless Communication products to people's lives throughout the world.

15 14 13 21 22 17 16 18 19 24 28 20 23 25 26 27 TORS 1 Antenna 2 PTT(Push-To-Talk) Key 3 Monitor Key 4 Keylock/Call Key 5 Memory/Scan Key 6 Channel/Power Hi-Lo Key 7 Speaker 8 Headset Jack 9 Select/Power On-Off Key 10 Volume/Select Up Key 11 Volume/Select Down Key 12 Microphone 13 Receive Indicator ...

GETTING STARTED Uniden does not represent this product to be waterproof. Do not expose this product to Rain or Moisture. If you don't use the UH047SX for long periods, Uniden recommend removing the batteries. The UH047SX is designed to retain the previous user settings. This feature will continue to...

INSTALLING THE CHARGE CRADLE 1. Plug the AC adaptor into the rear of the charge cradle and into the mains power. UH047SX 2. Place the UH047SX into the charge cradle. The charge light will come on to indicate the unit is charging. 3. Before operating the , charge the battery pack for 16 hours. Do not...

BELT CLIP LOW BATTERY ALERT To attach the belt clip: To remove the belt clip: Slide the belt clip until it snaps into place. To remove the belt clip, press and hold belt clip locker, slide the belt clip at the same time until released. If the battery level becomes low, the battery indicator icon on ...

OPERATION POWER ON/OFF VOLUME ADJUSTING THE KEY BEEPS ROGER BEEP 1. Press and hold key to turn the radio on. A channel number will appear on the display. 2. Press and hold key to turn the radio off. 1. Press or key to increase or decrease the volume level. ‘VOL’ icon appears on the display while vol...

(6) SELECTING A CHANNEL 1. Press key momentarily to activate channel select mode. The displayed channel will flash. 2. Press or key to select the desired channel. 3. Press key momentarily to exit channel select mode. If no button is pressed within 5 sec the UH047SX will exit from the channel select ...

AUTOMATIC SQUELCH FEATURE MONITOR The UH047SX is equipped with an Automatic Squelch System which shuts off weak transmissions and unwanted noise. This feature enables users to listen for weak signals on the current channel at the press of a button. 1. Press button. The icon will flash. 2. Release wi...

(8) REPLY DELAY While scanning, the UH047SX stops at a busy channel and receives a transmission. When the received signal is over, the unit will wait for 2 seconds for the return of the signal, otherwise, the radio resumes scanning. 1. Press key six times. appears on the display. 2. Press or to chan...

CTCSS & DCS (Continuous Tone Coded Squelch System) (Digital Coded Squelch) & CTCSS DCS is a digital extension of CTCSS. It provides 104 extra, digitally coded, squelch codes that follow after the 38 CTCSS codes. CTCSS 1- 38, followed by DCS 1-99 plus DCS 100-104 (represented by o0-o4 on the ...

(10) VOX VOX is the automatic transmitting function by inputting voice into the VOX headset mic without pressing the PTT button. 1. Press key momentarily twice while in standby mode to enter VOX Sensitivity mode. select/ The current selected VOX setting will flash on the display. 2. Press or key to ...

WARRANTY UNIDEN UH047SX UHF CB RADIO Limited One Year Warranty Please keep your sales docket as it provides evidence of warranty. Warrantor: Warranty only available in original country of purchase. Elements of Warranty: Warranty Duration: Parts Covered: Accessories: Procedure for Obtaining Performan...