Uniden UDWC23 - Manuals - manualsarea.com

Page 2 - Important Safety Instructions!; Warnings to Parents and Other Users

Important Safety Instructions! This manual contains important information about this product’s operation. If you are installing this product for others, you must leave this manual or a copy with the end user. When using your equipment, always follow basic safety precautions to reduce the risk of fir...

Page 3 - Contents; SAVE THESE INSTRUCTIONS!

Contents Important Safety Instructions! ..................... 2 Warnings to Parents and Other Users .......................2 For best results: ....................3 Getting Started ................... 4 Connecting the Power..............4 Charging the Batteries .......4 Learning the Buttons and Ligh...

Page 4 - Getting Started; Connecting the Power; Power status; Charging the Batteries

4 Getting Started Connecting the Power Connect one end of the AC adapter to the camera’s power connector and the other end to a standard 120 volt AC outlet. Press the POWER button on the camera; the Power status light should turn on. If it doesn’t, try reconnecting the AC adapter, and make sure the ...

Page 5 - Learning the Buttons and Lights; Button; Light; Power Status; Using the Camera Mount

5 Learning the Buttons and Lights Button What it does POWER Turn the camera on. Press and hold to turn it off. LINk Enter pairing mode. Light State What it means Power Status light On The camera is on. Off The camera is off. Link Status light Flashing The camera is in pairing mode. Orange The camera...

Page 7 - Pairing the Camera; to put the camera into pairing mode.; No Signal

Pairing the Camera Before you can use the camera, you’ll need to “introduce” or pair it to the receiver so they can communicate. You might also perform the pairing procedure if you are having trouble with the camera. Make sure the camera is powered on.On the receiver, select the channel you want to ...

Page 8 - Additional Information; Product Specifications; Radio Frequency Transceiver

8 Additional Information Product Specifications Radio Frequency Transceiver RF Frequency 2402 Mhz ~ 2483.5 Mhz Modulation GFSK Spread spectrum Frequency Hopping Anti Interference Clean Channel Dynamic Select Data rate 2 Mbps Channel bandwidth 2 MHz Transmitting range 200 meters/600 feet in an open a...

Page 9 - Camera Specifications; Low light solution; Polymer-Lithium Battery Warning; Rechargeable Batteries Must Be Recycled or Disposed of Properly.; Recycling and Disposal Information

Camera Specifications Low light solution 11 IR LEDs, 1 Low light sensor Low light sensitivity 1-8 lux Picture sensor OV7725 1/4’ Color CMOS Lens F3.6mm H:53 V:40 Polymer-Lithium Battery Warning CAUTION! Risk of explosion if battery is replaced by an incorrect type! This equipment contains a recharge...

Page 10 - FCC Compliance Information; Part 15 Compliance Statement; RF Exposure Information

10 FCC Compliance Information Part 15 Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference...

Page 11 - IC Compliance Information; Radio Equipment Notice; CE Compliance Information

11 IC Compliance Information Radio Equipment Notice The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must a...