Uniden UDS655 - Manuals

5 What’s InCLuDeD CH - CH + VOL+ M VOL- ESC REC/DEL ZOOM ALARM 7” LCD Digital Wireless Monitor (1) Digital Wireless Camera (2) Camera Antenna (2) Camera Stand (2) 5V/1A Power Adaptor for Monitor / Camera (1) Uniden Media Player and Remote System software CD (1) A/V Cable Extension Cable for Camera A...

6 settInG uP the equIPment set up the Camera General Placement Guidelines The Uniden UDSC15 cameras included with your monitor are weatherproof and have an IP66 weather rating. Water can be sprayed on them and they will still work; however, the cameras cannot be submerged underwater. Although the ca...

7 • Avoid pointing the camera directly at any bushes, tree branches, or moving objects that might naturally move due to winds. Otherwise, the motion detection feature may record unnecessarily. You can mount the camera with the stand on the bottom (on a flat surface such as a table-top), on the side ...

8 Attach the camera 1. For each camera, attach the camera bracket to the mounting screw. You can attach the stand to the top or the bottom of the camera as needed.Tighten it a few turns, then turn the camera to face the direction you want. 2. Tighten the camera brace up against the camera to secure ...

9 4. Connect the other end of the adapter to a 120 volt AC (standard indoor) power outlet. 5. Press and hold the PoWer button on the top of the monitor for 1 - 2 seconds to power it up. If... Try this... there is no camera picture Verify that the power supply adapter for the camera(s) is plugged in....

10 BasIC oPeratIon GettInG to KnoW Your monItor 1 2 1 2 34 5 67 8 9 10 11 12 Your monitor operates in three modes: M, Playback, and Record. The monitor's keys may operate differently based on what mode it is in. Key M (MENU) Playback REC Mode Other 1 Link LED (Green) 2 Power/Charge LED (Red) 3 Chann...

13 GettInG to KnoW Your Camera 11 10 1 8 9 2 3 4 5 6 1. Antenna 5. Link LED (Green) 9. Power Jack 2. Light Level Sensor 6. IR LED (25) 10. Microphone 3. Power LED (Red) 7. Camera Stand 11. Power Adaptor 4. Camera Lens 8. Pairing Key BasIC oPeratIon ruLes • The Pairing LED on the camera will blink on...

14 • The UDS655 can record in QUAD mode (all 4 channels recorded simultaneously), with each channel in 320 x 240 resolution. If only one camera is turned on (Camera Setup), then the UDS655 records that camera in full screen (640 x 480). • Press and hold PoWer for 1 second to turn on the system. • Pr...

15 To... Do This Playing back a recording Select the record to play back ( event LiSt , page 27) and press m. Cancel watching a recorded video Press esC . The event LiSt screen with video files for a selected date and time displays. Watching recorded video on PC or television To view on PC: Either p...

16 uDs655 sCreen DesCrIPtIons uDs655 maIn menu sCreen The UDS655 main menu lets you select from 8 screens to set your system preferences, from camera brightness to setting up and viewing recordings. This section describes the screens in detail. It provides a path to the screen being viewed and opera...

18 Screen Sub Screens What it Does ALARm BuZZeR nA You can set the alarm buzzer to sound when movement triggers a motion sensitive recording. Set it to ON or OFF. The SD card must be inserted and have sufficient space for the alarm buzzer to operate. pAn tiLt Zoom nA Zooms in and adjusts the viewing...

20 3. Quickly (within 30 seconds) press the PaIrInG key on the camera cable. The green Pair LED on the selected camera blinks once, pauses, and then stays on to indicate that data transmission is in progress. PAired displays on the screen if pairing is successful or PAirinG FAil if it isn’t. If Pair...

21 activate or DeactivateThis feature "turns off" the camera so it won't be viewed on the monitor. The camera is still powered on, just not visible to the monitor. This feature is useful for viewing a single camera in full screen mode constantly and to record that camera in full screen (640 ...

22 From this selection on the main menu - This screen should display: The reCorder SetuP screen has five options: • Record Schedule • Motion Detection Sensitivity • Format Storage • Setup Masking Area • Motion Record Time record schedule reCord SChedule lets you schedule recordings in 1 hour blocks....

27 1. From the reCorder SetuP screen, use VoL+ and VoL- to select reCord tiMe ; press m to select. The SetuP detAil oPtionS screen displays. 2. Use Ch+ and Ch- to select either 2, 5, or 10 minutes as the recording time. Press m to confirm selection. 3. Press esC to return to the previous screen. eVe...

28 From this selection on the main menu - This screen should display: Play Back recorded File 1. Use Ch+ , Ch-, VoL+ , and VoL- to select the dAte and HouR folders containing recorded file(s). Press m to confirm and enter each file. 2. Use Ch+ , Ch-, VoL+ , and VoL- to select the recorded file. Each...

29 • To play back a single camera on the screen, press m once after playback begins to pause playback. Use Ch+ and Ch- to select the channel for full screen playblack. A boxed number icon indicates which camera is in full screen playback mode. Delete recorded FilesYou can delete files from Date or H...

30 Date and time 1. From the SySteM SetuP screen, use Ch+ and Ch- to select yeAR , montH , dAte , HouR , and minute . 2. Use VoL+ and VoL- to scroll through the options for that selection, then Ch+ and Ch- to make another selection. Press m to save the settings when you are finished. tV output 1. Fr...

33 2. Use Ch+ and Ch- to choose between English, French (Français), or Spanish (Espanol). Press m to confirm and back out. The deFAult screen will also alert you when it detects a new firmware upgrade on the SD card. Go to page 52 for details. aLarm BuZZer You can set the alarm buzzer to go off when...

35 sCan aCtIVateD Cameras 1. From the the main menu, press Ch+ , Ch- , VoL+ , and VoL- to select ScAn ActivAted cAmeRAS and press m to enter Scanning mode. 2. The screen scans between the cameras according to the scan time set up in the Multi ChAnnelS idle diSPlAy screen (refer to page 31). If a rec...

37 sPeCIaL Features This section provides Remote Access requirements and software installation, setup, and usage procedures for accessing your live feeds from a number of wired and wireless devices. It also provides information on other special features such as: • Recording video and taking pictures...

38 • iPhone® or • iPad® or • Android TM smartphone or tablet Install uniden remote service software 1. Insert the UDS655 Remote Software CD in your PC's CD ROM. 2. Select Uniden Remote Service and double-click to install. 3. The WelCoMe window appears. Click next to select an installation folder. 4....

41 10. Select or enter the following: • Display language (Default = English). • USB 2.0 Camera (from USB Video Device dropdown list)• DID Code (located on the back of the monitor)• Security Code (The default security code is 12345.) You can set up a different security code at this time, but be sure ...

44 using remote access If you want to view your video remotely, you must do the following: 1. Verify that your PC is connected to the internet and that Uniden Remote Service software is installed. 2. Use the USB cable to connect the monitor and the PC. 3. Launch the Uniden Remote Service software.4....

45 taKe a snaPshot throuGh the PortaL The Portal lets you take snapshots of video and save to your PC.Click SnAPShot . You specify the save location for all video and snapshots. Select Save and then browse to the location where you want to save them. PLaY BaCK reCorDeD FILes on Your PC The files tha...

47 DoWnLoaDInG anD usInG the aPPs anDroID TM DownloadYou can use a Google® Android TM smart phone or tablet with your Uniden Guardian 2 System to remotely connect to and view live camera video. Follow these steps to download, add, and use the app. 1. From your Android TM smart phone or tablet device...

48 The Uniden Guardian 2 app has a Search feature which will automatically find your UDS655 system on your "intranet." If the phone is connected via WiFi to the same router/ network that the PC is on, selecting the Search button in the app will automatically find your system and enter the DI...

49 4. Tap return to stop the video and enter the system page. You can take snapshots from the video by using the Snapshot and Return icons. Snapshot icon. Tap to take a picture. Return icon. Tap to return to the Main screen IPhone® In a similar fashion to the Android smart phone, you can use the App...

50 The Uniden Guardian 2 app has a Search feature which will automatically find your UDS655 system on your "intranet." If the phone is connected via WiFi to the same router/network that the PC is on, selecting the Search button in the app will automatically find your system and enter the DID...

51 Snapshot icon. Tap to take a picture. Return icon. Tap to return to the Main screen.

52 maIntaInInG Your sYstem uPGraDInG Your unIDen uDs655 FIrmWare Check your system firmware version by selecting your language again on the deFAult screen. Both the cameras and monitor firmware display.Go to www.unidenvideo.com to check the current firmware level. Compare it to your system firmware ...

53 soLVInG ProBLems If you have any trouble with your system, try these simple steps. If you are still having a problem with your camera, check the manual that came with your camera. If… Try.. Motion detection won’t respond to movement. • Increasing the motion sensitivity (see page 24). • Checking t...

55 sPeCIFICatIons Camera Monitor Maximum Channels 4 Communication Range 500 ft in open space Monitor Resolution 800 x 480 Camera Resolution 640 x 480 Operating Temperature -10°C ~ +50°C Operating voltage DC 5V / 1A Current consumption 550mA (max) 860mA (max) Night Vision 40 ft Dimension 123L x 65h x...

56 radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or te...

57 one-year Limited Warranty Important: evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials & c...