Page 2 - Important Safety Instructions!; SAVE THESE INSTRUCTIONS!; Using the MULTIRANGE; Registering the; Placing the MULTIRANGE; Wall Mounting the
Important Safety Instructions! When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sin...
Page 3 - Setting Up Your Handset; Install the Battery
3 Setting Up Your Handset Install the Battery 1. Unpack the handset, battery pack, and battery cover. If the battery cover is already on the handset, press in on the notch and slide the cover down and off. 2. Line up the battery pack connector with the jack inside the handset. (The battery connector...
Page 4 - Registering the Handset; Compatible Bases; Handset Registering
4 3. Place the handset in the charger with the display facing forward. The CHARGE light should turn on. If... Try... the CHARGE light does not turn on - reseating the handset. - checking the AC adapter connection. - seeing if the outlet is controlled by a wall switch. Charge the handset completely (...
Page 5 - After about 30 seconds, the handset display; Registration Complete; Talk; you don't hear a dial tone; Attaching the Belt Clip
5 2. On the handset, press and hold Pound (#) until the display says Handset Registering (about 2 seconds). After about 30 seconds, the handset display should say Registration Complete . Test the connection Pick up the handset and press Talk . Make sure you get a dial tone. (Press End to hang up.) I...
Page 6 - Charger; How It Works
6 Using the MULTIRANGE TM Charger How It Works The DRX402 MULTIRANGE TM charger extends the range of your base in all directions, including up and down. Each handset will automatically connect to the charger or the base, depending on which signal is stronger. (The handset operates exactly the same w...
Page 7 - Registering the MULTIRANGE; charger is a separate; Register Handset; LINk
7 Each of these bases can support up to two DRX402 MULTIRANGE TM chargers, including any that were supplied with your phone. Usually, you can't tell when a handset switches between the base and the charger in the middle of a call, but sometimes, you might notice a brief pause in your conversatio...
Page 8 - at least 35 feet; Picking the best spot
8 If you want to use the MULTIRANGE TM charger with a different base, just register the charger to the new base. The charger automatically erases the link to the old base when it registers to the new one. Only register the charger to one base at a time. If more than one base is in registration m...
Page 9 - Testing the location; Wall Mounting the MULTIRANGE; wall
9 3. Watch the signal strength icon on the handset. Make a note where the icon drops from 4 bars to 3 bars. 4. Continue walking away from the base. Make a note where the signal strength icon drops from 3 bars to 2 or if you start to hear noise on the line (which indicates the signal is getting weake...
Page 10 - DESk
10 3. Align the stand with the notches on the charger. 4. Slide the stand onto the notches until it clicks into place. 5. Insert two #10 screws into the wall, 30 mm apart. (For best results, use a level to ensure the screws are even.) Remember to use appropriate anchors for the wall material. 6. Kee...
Page 11 - Important Information; Specifications
11 Important Information Specifications AC Adapter Part number PS-0033 Input voltage 120V AC, 60 Hz Output voltage 6.5V AC @ 350mA Battery pack Part number BT-1018 Capacity 500mAh, 2.4V DC Use only the supplied AC adapter. Be sure to use the proper adapter for the base and any chargers. Do not...
Page 13 - Compliance Information; authority to operate this product.; FCC Part 15 information; communications may not be ensured when using this phone.; RF exposure information; following conditions:
13 Compliance Information Any changes or modifications to this product not expressly approved by the manufacturer or other party responsible for compliance could void your authority to operate this product. FCC Part 15 information This device complies with part 15 of the FCC rules. Operation is subj...
Page 15 - One-year Limited Warranty
15 One-year Limited Warranty Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials...
Page 16 - Uniden America Service; Uniden
16 allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you.LEGAL REMEDIES: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This warranty is void outside the U...