Page 2 - WARNINGS & NOTIFICATIONS
i WARNINGS & NOTIFICATIONS When using the GPS105 in a motor vehicle it is the user's responsibility to ensure operating the GPS105 does not detract from the safe operation of the vehicle. For safety reasons it is not recommended that a driver change any settings while in motion. Please come to a...
Page 3 - INSTALLING YOUR GPS105; Guide; Quick Start
The Quick Start Guide pages are designed to allow you to install and operate your GPS105 as quickly as possible, however it does not attempt to explain any of the advanced features of the GPS105 unit. The GPS105 is designed to fit into a standard car stereo (DIN) fitting. You may also use the suppli...
Page 4 - BACK PANEL; CONNECTING YOUR GPS105
BACK PANEL vii. Connect microphone plug to microphone socket. An optional External Speaker may be connected via the External Speaker Jack. When the external speaker is connected the internal speaker is automatically disconnected. The connecting wire must use a 3.5mm miniature plug. i. Remove fuse fr...
Page 5 - TEST FOR A GPS SIGNAL; SEARCHING FOR
i. Turn the GPS105 ON. ii. The Welcome display will appear. iii. After 3 seconds the initial display will switch to the UHF-CB display. iv. At the top of the display the unit will indicate it is searching for satellite information. In this case an external GPS Antenna may be used in place of the int...
Page 6 - SETTING USER NAME
SETTING USER NAME You may personalize your GPS105 by setting a User name which will appear at the top of the display. The User name also forms part of your call ID when communicating to radios using similar technology (GPS105 or GPS205) on channel 22 or 23.To set your Username: i. Press & hold t...
Page 7 - SEND POSITION ON; End of
SEND POSITION ON 5 The SEND POSITION function enables the GPS105 to transmit your User name and position on channels 22 and 23.The factory setting for this feature is OFF. To turn SEND POSITION ON: i. Press & hold to bring up the menu list. ii. Scroll to highlight SENDPOSITION. iii. Press . iv. ...
Page 8 - CONTENTS
1 CONTENTS Warnings & Notifications...................................................................................................................................................i Quick Start Guide..................................................................................................
Page 10 - GPS FUNCTIONS; INTRODUCTION
The Uniden GPS105 is designed to provide you with years of trouble free service. It's rugged components and materials are capable of withstanding harsh environments. We are certain that you will enjoy your GPS105. Please read this operating Manual carefully to ensure you gain the optimum performance...
Page 11 - CONTROLS
CONTROLS 1. LCD Display 2. /MEM - Scan Key/Memory Key 3. - Navigation Key 4. VOL/SQ - Centre Knob (Power-VOLUME): Turns the Power ON/OFF and adjusts the Volume. Outer Ring (SQUELCH): Adjusts the Squelch 5. PTT - Push to Talk(PTT) switch 6. Channel Instant - Instant Channel switch 7. Speaker 8. MENU/...
Page 12 - INDICATORS
INDICATORS 5 UHF-CB Display 11 GPS - GPS status icon12 USER NAME - An example (MICHAEL) is shown13 BUSY - Receive icon14 INSTANT - Channel Instant icon15 DUPLEX icon 16 MEMORY icon17 CTCSS icon18 SCAN icon19 CTCSS Channel indicator20 Channel indicator 11 20 19 18 17 12 13 16 15 14
Page 13 - INCLUDED WITH YOUR GPS105
INCLUDED WITH YOUR GPS105 6 Mounting Bracket, Knobs, Rubber washer, Washer Stars and Screws. GPS105 Owners Manual Microphone Microphone Hanger Screws and washers DC Power Cord with fuse GPS Internal Antenna If any of these items are missing from the box, contact your dealer immediately. Operating Ma...
Page 14 - SETTING THE SQUELCH
2. Think of the Squelch control as a gate. If you turn SQUELCH fully clockwise it raises the "Squelch Gate" so that no signals get through. 3. If you turn the SQUELCH fully counter clockwise, it lowers the "Squelch Gate" so that everything gets through - noise, weak signals and stron...
Page 16 - Operation with the aid of a Repeater
9 If DUPLEX is selected from the MENU options when the channel is not from CH01 - CH08, an error tone sounds. TO OPERATE IN DUPLEX MODE (REPEATERS) Operation with the aid of a Repeater The Duplex function enables you to access local repeater stations. You can only activate Duplex from CH01-CH08.UHF ...
Page 17 - REPLY DELAY
10 UHF CB - OPERATION SCANNING with PRIORITY CHANNEL SCANNING - SCAN MEMORY The scan function scans channels that are in the scan memory and stops at an active channel. Whichever channel you have selected when SCAN begins becomes the Priority Channel. SCAN will check the priority channel every 1.5 s...
Page 19 - ROGER BEEP
KEY BEEP ON/OFF ROGER BEEP Your radio emits a beep each time one of the keys (except for the PTT button) is pressed. To turn Key Beep ON/OFF: 1. Press & hold . 2. Scroll to highlight KEY BEEP. 3. Press . 4. Press or to select ON or OFF. 5. Press to confirm. Roger Beep is a BEEP that is sent to n...
Page 20 - GPS OPERATION; OPERATION FLOW; SPEED WARNING
13 GPS OPERATION The GPS antenna must have an unobstructed view of the sky for the GPS105 to retrieve satellite data which is used for the GPS features described on pages 13 to 25. Current regulations permit the SEND POSITION to operate on Channels 22 and 23 only. To comply with current regulations,...
Page 21 - EARLY WARNING SAFETY ALERTS; WARNING VOLUME
14 To set the volume for the safety alerts (FIXED CAMERA, RED CAMERA, BLACK SPOT & SPEED WARNING) with this function: 1. Press & hold to bring up menu list. 2. Scroll to highlight WARNING VOL. 3. Press . 4. Press to adjust volume setting (8 levels:0-7, 0 is OFF). 5. Press to confirm. EARLY W...
Page 22 - CALLER DISPLAY; CALLER ID Memories; GPS
15 CALLER DISPLAY The caller display information received from another radio using similar technology on channels 22 and 23 will POP UP at the end of a received transmission. The information includes : Callers USER NAME. Distance to where call was transmitted from. Estimated time of arrival from you...
Page 23 - MARK LOCATION; QUICK ACCESS LOCATIONS
16 MARK LOCATION Mark Location is used to store in memory a location, which may be used in future as a point to navigate back to, or safety alert location. The quick access locations are to mark your HOME, OFFICE, HOTEL, AIRPORT or BOATRAMP locations. You may mark the location with the current GPS c...
Page 24 - MY POI LOCATIONS; CAMP
You may mark up to 500 locations into MY POI (My Point Of Interest). Each location may be personalised with a name. 1. Move the GPS105 to the location you wish to mark as MY POI, or have the desired coordinates at hand. 2. Press and hold to bring up the mark location list. 3. Scroll to highlight MY ...
Page 26 - ADD or DELETE SAFETY ALERT
19 ADD or DELETE SAFETY ALERT You can store into memory new safety alert (Fixed Speed Camera, Red Light Camera or Black Spot) locations. If the GPS105 is within 400m of a stored Safety Alert or OPTION location then you can delete this from memory. 1. Move the GPS105 to an alert location you wish to ...
Page 27 - NAVIGATION; EE
20 NAVIGATION SUZAN GPS TIME TO GO 16 22 hr min EE NNWW SS SUZAN GPS DISTANCE 14.7 km EE NNWW SS The navigation feature allows you to select a desired stored location point to navigate to. The location point can be a pre-installed state, city or suburb, quick access location, MY POI or CALLER from t...
Page 28 - Navigate to Quick Access; Navigate to CALLER
21 OPERATION FLOW OPERATION FLOW 1. Press . 2. Scroll to highlight desired Quick Access Name. 3. Press . NAVI display appears. Press to switch between UHF-CB, NAVI & TRIP COMPUTER displays. To Cancel Navigation press then press . 1. Press . 2. Scroll to highlight CALLER. 3. Press . 4. Scroll to ...
Page 29 - Navigate to MY POI
22 OPERATION FLOW 1. Press . 2. Scroll to highlight MY POI. 3. Press . 4. Scroll to find a desired name. To shortcut to the capital letter of the name: Press to highlight the capital letter on the right of the display. Scroll to the desired letter. Press to move back to the name list. 5. Press . NAV...
Page 30 - Navigate to STATE/CITY
23 OPERATION FLOW Press to switch between UHF-CB, NAVI & TRIP COMPUTER displays. To Cancel Navigation press then press . 1. Press . 2. Scroll to highlight STATE/CITY. 3. Press . The list of Australian States and NZ appears. 4. Scroll to desired state. 5. Press . The City/Suburb list appears. 6. ...
Page 31 - TRIP COMPUTER; TO RESET TRIP COMPUTER
24 TRIP COMPUTER The GPS105 can indicate COMPASS heading and the present speed, average speed, maximum speed and the distance travelled through the TRIP COMPUTER. Press to switch between UHF-CB, NAVI (if navigating) & TRIP COMPUTER displays. The TRIP displays alternate automatically as follows: ...
Page 32 - LCD CONTRAST
Press & hold LCD CONTRAST MENU OPERATION FLOW Your current GPS coordinates can be viewed with this selection. 1. Press & hold to bring up the menu list. MY POSITION appears as the first highlighted selection. 2. Press to confirm selection. My Position display appears with your current GPS co...
Page 33 - UHF CHANNELS & FREQUENCIES; CTCSS TONE LIST
UHF CHANNELS & FREQUENCIES Channels 05 and 35 are Emergency Channels and Channel 11 is a Calling Channel. Channels 22 and 23 are used for telemetry and telecommand applications, voice communications are not permitted on these channels. CTCSS TONE LIST UHF CHANNELS & FREQUENCIES 476.425 476.4...
Page 34 - TROUBLESHOOTING
If your GPS105 does not perform to your expectations, try the suggestions listed below. Unit does not operate. No GPS Detection. Cannot send or receive Caller ID. Does not operate in Duplex mode. ! ! !! !! Check the 2 Amp fuse in the power lead. Make sure the GPS antenna has an unobstructed view of ...
Page 35 - UNIDEN GPS105 UHF CB RADIO WITH GPS; WARRANTY
UNIDEN GPS105 UHF CB RADIO WITH GPS Limited One Year Warranty Please keep your sales docket as it provides evidence of warranty. Warrantor: Elements of Warranty: Warranty Duration: Parts Covered: Statement of Remedy: Procedure for Obtaining Performance or Warranty: UNIDEN AUSTRALIA PTY Uniden Austra...
Page 36 - THANK; FOR
© 2004 Uniden Australia Pty Limited Uniden New Zealand Limited Printed in China UTZZ01926ZZ THANK YOU FOR PURCHASING A UNIDEN PRODUCT