Uniden G955 - Manuals

6 WHat’s InCLuDeD You should have the following items: G955 Monitor Camera (2) Stand (2) AC Adapter (3) Antenna (2) Not Shown: Mounting screws, Ethernet cable, 2 extension cords, and microSD™ card and adapter. If any items are missing or damaged, contact our Customer Care Line immediately. Never use...

7 GettInG to KnoW tHe G955 sYstem G955 monitor 3 9 7 5 4 6 8 2 1 No. What it is 1 Monitor Antenna: sends & receives signals to or from the camera. 2 Power: Turns the monitor on and off. 3 microSD Card Slot: Insert microsD card to record video. 4 Reset button: If the monitor screen freezes, use a...

8 G955 Camera (GC45) Front view Back view Power status Link status Light sensor Antenna connector Power pigtail Pair button Microphone Power jack Ethernet Connector What the lights mean Light State What it means Power status On (Red) The camera is on. Off The camera is off. Link status Flashing The ...

9 settInG uP tHe eQuIPment set up the monitor 1. Flip out the stand on the back of the monitor, and extend the antenna. Connect an AC adapter to the power input on the side of the monitor. Connect the other end of the adapter to a 120 volt AC (standard indoor) power outlet. 2. Press and hold the PoW...

10 • Optimized motion detection range is 6 - 18 feet for the GC45 camera. The farther away an object is, the less accurate the motion detection. • Avoid having a direct light source in the view of the camera, including street lights, ceiling or floor lamps, spotlights in the driveway, etc. • Rainfal...

11 2. Tighten the camera brace up against the camera to secure it into place.3. Unlock the mounting post by turning the wingnut to the left a few turns.4. set the mounting post to the correct angle, then tighten the wingnut until the post is locked into place. 5. Attach the antenna to the rear of th...

12 • screen Auto Lock (“screen Auto Lock” on page 35) • Time (“Time” on page 36) • security code (“security Code” on page 31) • Language (default language is english; “Language” on page 40) recording settings • motion Detection (“motion Detection” on page 25) • schedule Recordings (“schedule Record”...

13 unIDen GuarDIan soFtWare oPeratIon oVerVIeW Your monitor’s Uniden Guardian software operates through a series of screens that let you choose groups of operations. For example, when you tap on the camera icon in the Pop-up menus, you can set how you want the main viewing screen - called the Live s...

14 What the Icons mean Icon What it does CamERa mOdE Select how you want the Live screen to display camera input:• Scan between cameras (5 seconds) • Quad view (all paired cameras display) • Full view (1 camera displays on full screen) VOLumE Adjust the volume level. uNIdEN GuaRdIaN SySTEm SETTINGS ...

16 Icon What it does NO mICROSd CaRd INdICaTOR Displays red when the microSD card is not present or is damaged. Changing How the Live screen Displays The Live screen displays in 2 views - Quad view or Full view. Quad view divides the screen’s image area into 4 quadrants and displays camera video in ...

17 usInG Your sYstem recording Live Video 1. On the Live screen, tap for the camera to begin recording. The icon blinks while recording. 2. Tap it again to stop recording. The icon stops blinking. You can record from all cameras at the same time. Playing Back recorded Video From the pop-up menu, tap...

18 If you tap on a day that is not highlighted, a folder displays with no recordings listed. 2. Tap on the recording you want to view. It begins playing. Control icons display across the bottom of the screen. 3. Tap on any area of the screen that does not have control icons to bring up the playback ...

19 2. Tap the X on the right-hand side of the entry. If you are deleting a folder, a confirmation screen displays. If you are deleting a single recorded file, that file deletes without a confirmation required. adding new Cameras Your monitor supports a total of four active cameras at a time. When yo...

20 Troubleshooting Camera Pairing Consult the following table for camera pairing troubleshooting suggestions: If... Try... the camera’s signal status icon shows no bars • making sure the camera is plugged in and the red LED is on. • making sure that the camera’s antenna is attached and the monitor’s...

21 unIDen GuarDIan sCreen DesCrIPtIons oVerVIeW This section describes the Uniden Guardian screens in detail. It provides a path to the screen being viewed. unIDen GuarDIan settInGs sCreen From the pop-up menu, tap the following icons as they appear on the screens: This screen should display:   Th...

23 Camera setuP sCreen Pairing Your cameras are paired to the monitor at the factory to channels 1 and 2. When you add a new camera to your system, you have to “introduce” the camera and monitor to each other so they can communicate. Some things to know about pairing cameras: • If a camera is alread...

24 Camera on When you add a camera to your system, pair up the camera with the monitor and the system will automatically turn it on. An X indicates a camera that is turned off; a check mark indicates the camera is turned on. From the pop-up menu, tap the following icons as they appear on the screens...

25 Brightness From the pop-up menu, tap the following icons as they appear on the screens: This screen should display:     Tap the camera whose brightness level you want to change. The default brightness is 0, and the range is from -2 through 2. Tap on the camera to cycle through a range of sett...

26 1. each camera’s motion detection sensitivity can be set independently. You can set the motion detection level to Off, Low, or High. Tap on the camera to cycle through these choices. 2. Tap to return to the main Recorder Setup screen. The Motion Detection default setting for the cameras included ...

27 From the pop-up menu, tap the following icons as they appear on the screens: This screen should display:     1. Tap enaBLe to activate email Alert or DIsaBLe to deactivate it. 2. Tap on the SMTP Server field. A gmail notice displays with the port information; tap oK . A keyboard screen displa...

28 5. Repeat step 3 for the Email To field. Only one incoming email account will be accepted by the Uniden Guardian system. The incoming email account can be different from the outgoing email account. 6. Tap oK to save the settings, then tap to return to the previous screen. If you are using Gmail a...

29 From the pop-up menu, tap the following icons as they appear on the screens: This screen should display:     1. Tap the camera number you want to record (1 - 4). You can select up to all 4 cameras to record.2. set the recording start time. Tap the hour and number boxes separately and use the ...

30 netWorK setuP sCreen The Network Setup screen allows you to select your internet connection type and security code. You can also display the system default configuration. From the pop-up menu, tap the following icons as they appear on the screens: This screen should display:    Internet setup ...

31 DCHP is the most common connection. Your router will automatically assign an IP address to your Uniden Guardian system. Static IP is for those that have the ability to specify an IP address for the Uniden Guardian system. security Code set up your security code to limit who can have access to the...

32 4. enter your security code. You can switch the keyboard from alphabetical characters to numbers/symbols and back by tapping the field to the left of the space bar. Tap enter . The Security Code screen displays again. You must enter a security code to monitor your video from a PC or other device....

33 aLarm setuP sCreen From the Alarm Setup screen, you can: • set the length of time the alarm sounds. • select a melody for the alarm. Period This selection allows you to select the length of time the alarm will sound for the alarm clock. 1. Tap Period . The Change Siren Duration screen displays. 2...

34 melody This selection allows you to select a melody for the siren. 1. Tap Melody . The Change Siren Melody screen displays. 2. A check mark appears on the melody you tap and the monitor briefly plays a sample of the selected melody. 3. Tap to return to the previous screen. sYstem setuP sCreen Pow...

35 1. Tap Power Saving , then Enable to activate Power saving mode (Default = Disable). 2. A check mark appears on your selection.3. Tap to return to the previous screen. screen auto Lock When you turn on Auto Lock mode, the monitor automatically enters screen lock mode after being idle for 2 minute...

36 time The Time screen lets you set up clock alarms, set the system time, and set your local time zone. From the pop-up menu, tap the following icons as they appear on the screens: The following screen displays:     Clock Alarm This feature operates as an independent alarm clock. It does not af...

37 4. Tap on the minute block. The uP/DoWn arrows move to the minute block. set the minute. 5. Tap on am/Pm to toggle between the two. 6. Tap saVe when you are finished. Time Setting This screen contains fields to set the month, Day, Year, Hour, minute, and Am/Pm. 1. Tap to display the Time Setting ...

38 1. Tap to display the Time Zone screen. 2. scroll through the time zone lists to find your time zone. Tap on that time zone when you find it. 3. Tap saVe when you are finished. The Time Zone screen displays. storage management storage management lets you reformat your microsD card (erasing all re...

39 1. Tap Storage Management on the System Setup screen. The Storage Management screen displays. 2. You can tap either Format or Overwite from this screen. Format Formatting the microsD card erases all data. If there are files you need to keep, transfer those files from the microsD card to your comp...

40 From the pop-up menu, tap the following icons as they appear on the screens: This screen should display:     1. Remove the microsD card.2. Insert it into your computer. Use the adapter if needed.3. Go to www.unidenvideo.com or www.uniden.com. Locate the download information for your G955 firm...

41 From the pop up menu, tap the following icons as they appear on the screens: This screen should display:     1. select a language to change to that language. The Restore Default Settings screen displays. 2. Tap oK to continue with the language reset. The system will reboot in about 5 seconds....

42 remote aCCess oVerVIeW Uniden Guardian lets you view live video from your Windows® PC, an iPhone®, iPad®, or Android Tm smartphone or tablet. Free apps are available through the Apple App store or the Android market. This system uses P2P remote access technology and does not require configuring y...

43 3. Place the monitor the maximum distance away from your router.4. Turn on the monitor. A screen asks if you want to connect to the internet.5. Tap Connect . The Internet Connection status Indicator appears on the upper left of the LIVe screen indicating that the system is connected to the intern...

45 11. Provide a Device Nickname (1). 12. select your retailer from the list (2). enter the DID Code After selecting your Uniden Guardian system, you must enter the DID code. This DID code can be found on the back of your monitor. It is the characters underneath the barcode. You also can find the DI...

46 1. enter your own unique security code (1). 2. Click start (2). The security code you enter on the Uniden Video Portal and the app must match the security code you entered on the device. Any time you change the security code on the device, you must make the corresponding change on the Portal or a...

47 usInG tHe GuarDIan 2 aPP android Tm Establishing Your G955 System on the App. You can use a Google® Android Tm smart phone or tablet with your Uniden Guardian system to remotely connect to and view live camera video. Follow these steps to establish your G955 system on the app. 1. From your Androi...

48 If only one system is connected, the app will display the globe screen momentarily and then display the last image from that system. 5. Tap on the globe to view live video from that system. App Operation When you open the app on your Android smartphone or tablet, the Globe screen displays. It als...

49 • : Delete system. Tap this icon to delete the Uniden Guardian system. • : View Recorded Files. Tap this icon to display a list of recorded files. (see “To View Recorded Files from your mobile Device,” below.) Information Options These options display when you tap the icon. • : set up PIN Lock. A...

50 1. Launch the Uniden Guardian 2 app and select your G955 system. The main screen displays. 2. Tap the icon. The edit system, Delete system, and View Recorded Files icons display. 3. Tap VIeW reCorDeD FILes . A list of recorded files (event List) displays. You also have the following options avail...

51 Snapshot icon. Tap to take a picture. Pictures are saved to your phone. Record icon. Tap to begin recording. A red circle displays in the upper right-hand corner of the screen. The app records for 2 minutes, and stores the record-ed file on the monitor’s microSD card.Return icon. Tap to return to...

55 4. Tap on a file to play it. Two icons display on the screen: Pause icon. Tap to pause playback. Tap again to resume playback. Return icon. Tap to return to the previous screen. to DeLete FILes 1. Tap the DeLete aLL or DeLete one button on the bottom of the list of files. 2. If you tap DeLete aLL...

56 To Take Snapshots and Record from Live View From the Live view, three icons display on this screen - snapshot, Record, and Return. Snapshot icon. Tap to take a picture. The picture is saved to your phone. Record icon. Tap to begin recording. A red circle displays in the upper right-hand corner of...

57 maIntaInInG Your sYstem uPGraDInG Your unIDen GuarDIan FIrmWare Check your system firmware version on the Network Information screen. Go to www.unidenvideo.com to check the current firmware level. Compare it to your system firmware level. If you need to update your Uniden Guardian firmware, downl...

58 Copying Files from the microsD Card to the Computer 1. Remove the microsD card from the monitor.2. Insert it into your computer’s sD card slot. Use an adapter if necessary.3. Navigate to the microsD card and locate your files.4. Copy them to the computer. These files can now be deleted from the m...

59 soLVInG ProBLems If you have any trouble with your system, try these simple steps. If you are still having a problem with your camera, check the manual that came with your camera. If you still have a question, call our Customer Care Line; see “Customer Care” on page 2. If… Try.. The motion sensor...

61 sPeCIFICatIons Radio Frequency Transceiver RF Frequency 2.4 GHz Modulation GFSK Spread spectrum Frequency Hopping Anti Interference Clean Channel Dynamic Select Selectable camera channel 4 Data rate 2 Mbps Transmitting range 500 feet (152 meters) in an open area (line of sight) Image Specificatio...

63 ImPortant InFormatIon LItHIum-PoLYmer BatterY WarnInG • This equipment contains a rechargeable lithium-polymer battery. • Do not charge the battery in temperatures below 32 ° F (0 ° C) or higher than 113 ° F (45 ° C). • Do not open or mutilate the battery. • The rechargeable batteries contained i...

64 radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or te...

65 one-Year LImIteD WarrantY Important: evidence of original purchase is required for warranty service. WARRANTOR: Uniden America Corporation (“Uniden”) eLemeNTs OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials & c...