Uniden EXP4241 - Manuals - manualsarea.com

Page 2 - Introduction

1 Uniden 2.4GHz cordless phones are designed and engineered to exacting standards for reliability, long life, and outstanding performance. NOTE : Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ from the actual unit. The color of your cordl...

Page 3 - Included with Your Phone; Terminology; Talk Mode; Standby Mode; Do the following steps:; A. Choose the best location; Installing the Phone

2 Included with Your Phone • Base Unit • Handset • AC Adapter • Rechargeable Battery •Telephone Cord • This owner’s manual Replacement adapters, batteries and other parts may be purchased by calling the Customer Hotline at 1-800-297-1023, Mon-Fri 7 am to 7 pm, Sat/Sun 9 am to 5 pm, CST. (Phone suppo...

Page 4 - B. Install the rechargeable battery pack into the handset; Talk and Standby Times; DC IN 9V

3 B. Install the rechargeable battery pack into the handset The handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is placed in the base unit. NOTE : If your home has specially wired alarm equipment connected to the telephone line, be sure that in...

Page 6 - Making and Receiving Calls; Making a call; Flash and Call Waiting; Adjusting the Ringer and Earpiece Volume; Ringer tone and volume; Selecting a Different Channel; Using Your Phone

5 Making and Receiving Calls Making a call 1) Remove the handset from the base.2) Press the talk key. The talk/batt low LED flashes and turns on. 3) Listen for the dial tone.4) Dial the number. Receiving a call If the handset is in the base, simply remove the handset from the base. AutoTalk will aut...

Page 7 - Find Handset; Low Battery Alert; Cleaning the battery charging contacts; To maintain a good charge, clean the charging contacts on the; Tone Dialing Switch-over; Using the Speed Dial Memory; Storing Numbers in Speed Dial Memory

6 Find Handset To locate the handset, press the find hs key on the base. The handset beeps for 60 seconds. The handset stops beeping when any key is pressed, when it is returned to the base, or when the find hs key is pressed. The handset also stops beeping when an incoming call is received. Low Bat...

Page 8 - Dialing a Stored Number; Changing the Digital Security Code; Operational Frequency; Frequency

7 3) If you need the phone to pause during the dialing sequence, press the redial/p key to insert a two-second delay between the numbers. You can enter multiple pauses to increase the delay. Each pause counts as a digit. 4) Press the memory key again. 5) To store this number as one of the ten speed ...

Page 9 - Troubleshooting; Liquid Damage; Symptom; Case

8 Troubleshooting If your cordless telephone is not performing to your expectations, please try these simple steps first. If these steps do not solve your problem, please call our Customer Hotline at 1- 800-297-1023. (Mon - Fri 7 am to 7 pm, Sat/Sun 9 am to 5 pm, CST. Phone support is closed on holi...

Page 11 - One Year Limited Warranty

10 accessories may not ensure compliance with FCC RF exposure guidelines and should be avoided. Radio Interference Radio interference may occasionally cause buzzing and humming in your cordless handset, or clicking noises in the base. This interference is caused by external sources such as TV, refri...