Uniden EXP 971 Series - Manuals

Page 2 - Introduction; Features; Controls and Functions

1 Introduction The Uniden 900MHz cordless phones are designed and engineered to exacting standardsfor reliability, long life, and outstanding performance. NOTE: Some illustrations in this manual may differ from the actual unit for explanationpurposes. The color of your cordless phone may vary. ▼ Fea...

Page 3 - Do the following steps:; Choose the best location; Included with Your Phone

2 Do the following steps: A. Choose the best location C. Connect the base unit B. Install the rechargeable battery pack into the handset D. Choose the dialing mode A. Choose the best location Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONSincluded in the PRECAUTIO...

Page 4 - Low Battery Alert; C. Connect the base unit; DC IN 9V; NOTICE; before plugging into the phone line

3 4) Place the handset in the base with the keypad facing forward. NOTE: For optimum performance use only the Uniden Battery (BT-904) supplied with your phone. Replacement batteries are also available through the Uniden Parts Department at(800) 554-3988, Monday through Friday from 8:00 a.m. to5:00 p...

Page 5 - Making and Receiving Calls; TEL LINE; TIP; D. Choose the dialing mode; Handset On Base; Using Your Phone; Handset Off Base

Making and Receiving Calls 4) Once the handset battery pack is fully charged, connect the telephone line cord to the TEL LINE jack and a telephone outlet. TIP : If your telephone outlet isn’tmodular, contact your telephonecompany for assistance. D. Choose the dialing mode Most phone systems use tone...

Page 6 - Terminology; Talk Mode; Standby Mode; talk; Adjusting the Ringer and Earpiece Volume; Ringer tone; end; Redial; NOTE; Selecting a Different Channel; channel

5 Terminology Throughout this manual, terms such as Standby and Talk Mode are used. Below is theterminology explanation. • Talk Mode - The handset is off the base and the talk key has been pressed, enabling a dial tone. • Standby Mode - The handset may be sitting in or off the base, but is NOT in us...

Page 7 - Using the memory location features

6 Find Handset To locate the handset (while it’s off the base), press the find hs key on the base. The handset beeps for 60 seconds. Paging is canceled when pressing any handset key, the find hs key on the base or the handset is returned to the base. NOTE : Paging is also canceled when the phone rec...

Page 9 - Troubleshooting; Symptom; Liquid Damage; Case

8 Troubleshooting If your cordless telephone is not performing to your expectations, please try these simplesteps. NOTE : Do not attempt to service this unit yourself. Servicing must be performed by qualified personnel. Symptom The charge/in use LED won’t illuminate when the handset is placed in the...

Page 10 - Important Safety Instructions; Additional Battery Safety Precautions; Important Electrical Considerations; The FCC Wants You To Know

9 Precautions! Before you read anything else, please observe the following: Warning! Uniden America Corporation DOES NOT represent this unit to bewaterproof. To reduce the risk of fire, electrical shock, or damageto the unit, DO NOT expose this unit to rain or moisture. Rechargeable Nickel-Cadmium B...

Page 11 - Installation Considerations; Modular Jack

10 operate at a maximum distance with the qualification that therange depends upon the environment in which the telephone isused. Many factors limit range, and it would be impossible toinclude all the variables in our rating. The Maximum Range ratingof this phone is meant to be used as a means of co...

Page 12 - One Year Limited Warranty

One Year Limited Warranty Important : Evidence of original purchase is required for warrantyservice. WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one year, to theoriginal retail owner, this Uniden Product to be free from defects inmaterials and craftsma...