Uniden EXP 4240 - Manuals - manualsarea.com

Page 2 - AutoTalk; AutoStandby; UltraClear Plus

1 Uniden 2.4GHz cordless phones are designed and engineered to exacting standards for reliability, long life, and outstanding performance. NOTE : Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ from the actual unit. The color of your cordl...

Page 3 - Included with Your Phone; Terminology; Talk Mode; Standby Mode; talk; Do the following steps:; A. Choose the best location; Installing the Phone

2 Included with Your Phone • Base Unit • Handset • AC Adapter • Rechargeable Battery •Telephone Cord • This owner’s manual Replacement adapters, batteries and other parts may be purchased by calling the Customer Hotline at 1-800-297-1023, Mon-Fri 7 am to 7 pm, Sat/Sun 9 am to 5 pm, CST. (Phone suppo...

Page 4 - B. Install the rechargeable battery pack into the handset; NOTE; Talk and Standby Times; DC IN 9V; Use only the supplied AD-0001 AC

3 B. Install the rechargeable battery pack into the handset The handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is placed in the base unit. NOTE : If your home has specially wired alarm equipment connected to the telephone line, be sure that in...

Page 5 - flash

4 4) Charge your handset at least 15-20 hours before plugging the phone line . 5) Once the handset battery pack is fully charged, connect the telephone line cord to the TEL LINE jack and a telephone outlet. If your telephone outlet isn’t modular, contact your telephone company for assistance. D. Mou...

Page 6 - Making and Receiving Calls; Making a call; Flash and Call Waiting; You must subscribe to call waiting through your telephone; Adjusting the Ringer and Earpiece Volume; Ringer tone and volume; Selecting a Different Channel; Using Your Phone

5 Making and Receiving Calls Making a call 1) Remove the handset from the base.2) Press the talk key. The talk/batt low LED flashes and turns on. 3) Listen for the dial tone.4) Dial the number. Receiving a call If the handset is in the base, simply remove the handset from the base. AutoTalk will aut...

Page 7 - Find Handset; find hs; Low Battery Alert; unit after each telephone call.; Cleaning the battery charging contacts; To maintain a good charge, clean the charging contacts on the; Tone Dialing Switch-over; Using the Speed Dial Memory; Storing Numbers in Speed Dial Memory; memory

6 Find Handset To locate the handset, press the find hs key on the base. The handset beeps for 60 seconds. The handset stops beeping when any key is pressed, when it is returned to the base, or when the find hs key is pressed. The handset also stops beeping when an incoming call is received. Low Bat...

Page 8 - Dialing a Stored Number; Changing the Digital Security Code; automatically next time the battery pack is charged.; Operational Frequency; Frequency

7 3) If you need the phone to pause during the dialing sequence, press the redial/p key to insert a two-second delay between the numbers. You can enter multiple pauses to increase the delay. Each pause counts as a digit. 4) Press the memory key again. 5) To store this number as one of the ten speed ...

Page 9 - Troubleshooting; Liquid Damage; please follow these steps.; Symptom; Case; unplug the telephone line while recharging the

8 Troubleshooting If your cordless telephone is not performing to your expectations, please try these simple steps first. If these steps do not solve your problem, please call our Customer Hotline at 1- 800-297-1023. (Mon - Fri 7 am to 7 pm, Sat/Sun 9 am to 5 pm, CST. Phone support is closed on holi...

Page 10 - The FCC Wants You To Know

9 Precautions! Before you read anything else, please observe the following: Warning! Uniden America Corporation DOES NOT represent this unit to be waterproof. To reduce the risk of fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture. Rechargeable Nickel-Cadmium...

Page 11 - One Year Limited Warranty

10 accessories may not ensure compliance with FCC RF exposure guidelines and should be avoided. Radio Interference Radio interference may occasionally cause buzzing and humming in your cordless handset, or clicking noises in the base. This interference is caused by external sources such as TV, refri...