Uniden DSS3450 - Manuals

[8] Parts of the Base 24. Base charging contacts25. Base Speaker26. key 27. Charge LED28. in use LED29. Base Antenna30. keys (Volume Up/Down) 31. key 32. key 33. key (intercom/transfer) 34. key and LED (do not disturb) 35. key 36. key 37. Base Microphone38. key and speaker LED (speaker) 39. key 40. ...

[9] B P Handset Icons ICON STATUS DESCRIPTION Standby/Talk Standby Talk Talk Talk Talk The icon indicates the handset battery status: full, medium, low, and empty. The icon indicates that the ringer is turned off. The icon appears when you mute the handset. The icon appears when the Clarity Boost fe...

The Standby Screen When the phone is in standby, the handset display shows the following items: [10]

[11] Using the Interface Using the Handset Menus Using the Four-way Function Key [menu/clear] [select/ ] [ ] Your handset has a four-way function key that allows you to move the cursor on the display and access the most commonly used features at the touch of a button. By moving this key to the left,...

[12] Entering Text from Your Handset You can use the number keypad on your phone to enter text by referring to the letters printed on each number key. When you press the number key in a text entry field, the phone displays the first letter printed on the number key. Press the number key twice to dis...

Installing the Phone Choosing the Best Location When choosing a location for your new phone, here are some important guidelines you should consider: • The location should be close to both a phone jack and a power outlet that is not controlled by a wall switch. • The base and handset should be kept a...

[14] Wall Mounting the Base This phone can be mounted on any standard wall plate. 1. Snap the wall mount adapter into the notches on the base top. 2. Plug the AC adapter into the jack. 3. Route the AC adapter cord through the molded wiring channel as shown. 4. Plug the AC adapter into a standard 240...

[15] Direct wall mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. Try ...

[16] Installing the Rechargeable Battery Use only the Uniden BT-909 rechargeable battery pack supplied with your cordless telephone. Follow the steps below to install a battery. 1. Press in on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to...

[17] Connecting to the Phone Line High Speed Internet Once the handset battery pack is fully charged, connect the telephone line cord to the TEL LINE jack and to a standard telephone wall outlet. If your phone line also has High Speed Internet please ensure you are using an approved line filter befo...

[19] Basic Setup Setting the Day and Time Note: If you don't press any keys for two minutes when setting the day and time, the phone exits the menu. [menu/clear] [select/ ] [select/ ] [select/ ] [select/ ] To change the day and time shown in the display, follow the steps below. 1. Press . Select the...

Activating Caller ID on Call Waiting Activating Distinctive Ring Your phone supports Caller ID on Call Waiting (CIDCW), so you see the name and number of someone who calls when you're already on the line. You need to subscribe to these features with your phone company before you can use them. The Ca...

number into your phone, you can simply press to access your voice mail. When you subscribe to the service, your voice mail provider provides you with the access number and the required voice mail signaling tone. [select/ ] Notes: Voice Mail Access Numbers : Australia - Message Bank : 125101, Home Me...

[22] Activating Name Tag (POP ID) Activating the Insert 0 The Name Tag feature works with the Caller Display number from Caller ID. A subscription to the Caller ID service is required from your network provider. There is usually a fee for this service. When the phone rings the received Caller Displa...

[23] Adding Extra Handsets Your phone supports up to four handsets, including any handsets supplied with your phone. Accessory handsets do not need to be connected to a phone jack. You can now place a fully-featured cordless handset anywhere AC power is available to connect the handset charger. The ...

[24] Registering Accessory Handsets If you purchase an accessory handset, you need to register the handset before use. Only one handset can be registered at a time. Handsets supplied with the phone are registered to the base by the factory. When charged, pre-registered handsets display a handset ID ...

[25] Resetting Handsets Creating Phonebook Entries If you want to register the handset to a different base or replace a handset with another one, you must first clear the registration information from the base and the handset. 1. Press and hold and for at least 5 seconds, until the SYSTEM RESET menu...

[26] keypad to enter a name for this entry; the name can contain up to 16 characters. (See page 12 for entering text instructions.) If you do not want to enter a name for this entry, your phone stores this entry as <No Name>. Press 5. Enter the number for this entry (STORE/EDIT NO.). Once you ...

[27] Programming Base Speed Dial Numbers The dual- keypad phone can store 10 speed dial numbers, to . Follow the steps below to store new speed dial numbers in the base. ( Handset speed dial numbers are stored as part of a phonebook entry. See on page 25 for information on programming handset speed ...

[29] Deleting All the Phonebook Entries at Once Copying Phonebook Entries to Another Handset 1. When the phone is in standby, press . 2. Move the cursor to select DELETE ALL, and press . DELETE ALL? appears in the display. 3. Select YES, then press . A confirmation tone sounds, and DELETED! appears ...

[30] Customizing Your Phone Changing the Handset Banner [menu/clear] [select/ ] Each handset will display a banner name once it is registered to the base. The default banner is Handset #1, Handset #2, etc. You can change the name your phone displays by changing the banner display. If you have more t...

[31] Selecting Ring Tones You may choose from 10 tones or 10 melodies for your phone's primary ring tone. Each station can use a different ring tone or melody. The available ring tones are listed below: 1. Press . 2. Select the HANDSET SETUP menu, and then the RINGER TONES submenu. 3. Move the curso...

[33] Using Your Phone Making a call Answering a call Hanging up From a cordless handset [ / flash] OR [ / flash] [ / flash] [ ] From a handset speaker phone [ ] OR [ ] [ ] [ ] From the base speakerphone 1. Remove the handset from the charging cradle. 2. Press . 3. Listen for the dial tone. 4. Dial t...

[36] Using Call Waiting If you have Call Waiting service and a second call comes in when you are on the phone, a call waiting tone will sound. Press and then 2 on the handset OR and then 2 on the base to switch between callers. There is a short pause during the switch. Press on the handset OR on the...

[37] Redialing a Number Deleting a Redial Record Adjusting the Ringer, Earpiece, and Speaker Volume If you want to delete a phone number from the handset's redial list, follow the steps below: 1. With the phone in standby, press . 2. Use or and to scroll through the redial list. 3. When you find the...

[38] Adjusting the Earpiece and Speaker Volume Adjusting the Audio Tone and Clarity Boost Finding a Lost Handset You can choose from six volume levels for the earpiece and speaker. To adjust the volume while on a call, press to make it louder or to make it softer. If you aren't satisfied with the au...

[39] Using Hold, Conference, and Transfer Conferencing Placing a Call on Hold During a call, press on the handset or on the base to place the caller on hold. If you leave a caller on hold for more than ten seconds, the display screen will read LINE ON HOLD. To return to the party on hold, press or o...

[41] Using Special Features Muting the Ringer (One Call Only) Muting the Handset Microphone Privacy Mode (Handset only) While a handset is ringing, press on the handset to mute the ringer for this call. The phone rings again on the next call. Mute turns off the microphone so the caller can't hear yo...

[42] Using the DirectLink Communication Feature Using the DirectLink feature, a pair of handsets can function as two-way radios. You can have up to two pairs of handsets using DirectLink at a time. DirectLink communication does not interfere with the main base's ability to make or receive telephone ...

[44] Answering an Intercom Page Room/Baby Monitor When the intercom page tone sounds, the display shows the ID of the station that is paging. From the handset, press or . If AutoTalk is on, the handset automatically answers the page when you remove the handset from the cradle. If Any Key Answer is o...

[46] Maintenance Warning Battery Replacement and Handling Battery Contact Maintenance With average use, your phone's battery should last approximately one year. To order replacement batteries, please visit www.uniden.com.au (Australian Model) or www.uniden.co.nz (New Zealand Model). To maintain a go...

Low Battery Alert Troubleshooting When the battery pack is very low, the phone is programmed to eliminate functions in order to save power. The battery pack needs to be charged when the empty battery icon appears. When LOW BATTERY appears in the display and the phone is in standby, none of the keys ...

[48] To reset the handset, do the following: [ ] [#/>] Note: It is also possible to reset the handset back to its original factory settings. All changes including phonebook entries and Caller ID information will be erased. For more information on resetting the handset back to factory settings and...

[52] Liquid Damage Moisture and liquid can damage your cordless phone. Follow the suggestions below if your phone gets wet: If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off the liquid, and use as normal. If moisture or liquid has en...

[53] Specifications Operating Temperature 0° C to +50° C (+32° F to +122° F) Notes: Part Number Base: AAD-041S Charging cradle: AAD-600S Input Voltage Base: 240V AC, 50 Hz Charging cradle: 240V AC, 50 Hz Output Voltage Base: 9V DC @ 350 mA Charging cradle: 9V DC @ 210 mA Use only the supplied AAD-04...

[54] Index A B C D E F H I K L M N O P R S T V Adjusting Audio Tone 38 Answering a Call 33 Any Key Answer 32 AutoTalk 32 Battery Contact Maintenance 46 Battery Replacement and Handling 46 Caller ID on Call Waiting 20 Clarity Boost 38 Day and Time 19 Deleting a Redial Record 37 Deleting Caller ID Num...

[55] Important: Warrantor: ELEMENT OF WARRANTY: DSS3450 WARRANTY DURATION: PARTS COVERED: DSS3450 DSS3450 STATEMENT OF REMEDY: PROCEDURE FOR OBTAINING PERFORMANCE OR WARRANTY: Evidence of original purchase is required for warranty service. Uniden Australia Pty Limited A.B.N. 58 001 865 498 Uniden Ne...

THANK YOU FOR BUYING A UNIDEN PRODUCT. © 2006 Uniden Australia Pty Limited. Uniden New Zealand Ltd. Printed in China UPZZ01428BZ(0)