Uniden Data 2000 Wireless CDPD PC Card - Manuals

Page 3 - Caution; - Before operating this device, be sure to place the antenna in; Uniden Data 2000 Installation and Operation Manual; Uniden Data 2000 Introduction

Caution - Before operating this device, be sure to place the antenna in the vertical position. This offers the best performance of your modem,and, at the same time, reduces the risk of possible exposure to electromagnetic radiation emanating from the antenna . The antenna must be maintained at least...

Page 4 - Uniden Data 2000 Wireless CDPD PC Card; What is the PCMCIA Standard for PC Cards?

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card 1.1 What is the Uniden Data 2000? The Uniden Data 2000 is a wireless CDPD (Cellular Digital PacketData) PC Card which enables most laptops, hand held computers, andPersonal Digital Assistants with Type II PC Card slots to communicatewith host-based applicat...

Page 5 - Product Highlights; Onboard battery for operation independent of host power.

In 1989, an international standards body and trade association wasfounded, called the PCMCIA (Personal Computer Memory CardInternational Association.). This organization was founded to establishstandards for Integrated Circuit cards and to promote interchangeabilityamong mobile computers where rugge...

Page 6 - Package Contents; Uniden Data 2000 Wireless CDPD PC Card:; Optional Accessories; Rechargeable Alkaline Battery Pack

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card 1.5 Package Contents ● Uniden Data 2000 Wireless CDPD PC Card: The physical module containing all of the electronic and other hardwareelements. (Includes the battery compartment, antenna andPCMCIA interface connector.) The PC Board is protected by aclam she...

Page 7 - Battery Life Expectations; Information

1.7 Battery Life Expectations The Uniden Data 2000 is powered by 4 AAA size alkaline batteries that,depending upon your application, should provide you with severaldays of use. Here is a matrix below that will give you an idea of theexpected battery life in relation to the modem’s anticipated use: D...

Page 8 - Host Computer System Requirements

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card 1.8 Host Computer System Requirements Before you install the Uniden Data 2000 Setup and Installation software, please check your host computer to make sure that it meetsor exceeds the following system requirements: Minimum requirements for MSWindows compute...

Page 9 - Setup Preparation; Hardware Required for Uniden Data 2000 Setup; Note; Setting Up the Uniden Data 2000

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Uniden Data 2000 Installation and Operation Manual 2 2-1 This chapter explains how to set up the Uniden Data 2000 foroperation with host computers running Windows 95/98, Windows NTand Windows CE. 2.1 Setup Preparation 2.1.1 Hardware Required for Uniden Data...

Page 10 - Have you configured the modem using UDConfig?

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card should be ready for use. If you have a problem or question, pleasereview the manual or contact Technical Support at 1 (888) 6UNIDEN. Check the following: ● Has the Uniden Data 2000 host application loaded properlyon the host computer? ● Have you established...

Page 11 - Uniden Data 2000 Host Application Installation; Setup and Installation; CD-ROM and floppy disks. These applications; Uniden Data 2000 Setup and Installation; dialog box, enter the command line

Uniden Data 2000 Installation and Operation Manual 2-3 2.2 Uniden Data 2000 Host Application Installation The Uniden Data 2000 host applications, UDConfig and UDInsight aredistributed on a CD-ROM and floppy disks: the Uniden Data 2000 Setup and Installation CD-ROM and floppy disks. These application...

Page 12 - Next

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card 2-4 6. Click Next . Note : Host application software needs to be installed once, (when you initially set up the Uniden Data 2000 for use with aparticular host computer); however, you must repeat the installation process for each new host computer used with ...

Page 15 - The following dialog box displays on the screen:; Finish; button on your Windows 95 desktop, then; Settings

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Uniden Data 2000 Installation and Operation Manual 2-7 5. The following dialog box displays on the screen: 6. Click Finish . The Location Information dialog appears. To check to see which COM port was selected during the setup process,take the following ste...

Page 16 - Modems; The following dialog box displays on the screen:

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card 2-8 The following dialog box displays on the screen: 8. Double-click the Modems icon. The following dialog box displays on the screen:

Page 17 - from the modems listed in; Properties; The following dialog box displays on the screen.; General

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Uniden Data 2000 Installation and Operation Manual 2-9 9. Select Uniden Data 2000 PC Card from the modems listed in the dialog box. 10. Click Properties . The following dialog box displays on the screen. 11. The COM port that was selected during the setup p...

Page 19 - Show control on task bar; then click; OK; not

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Uniden Data 2000 Installation and Operation Manual 2-11 The following dialog box displays on the screen: 3. Select the Show control on task bar check box, then click OK . If you have verified that the host computer has been set to display system tray icons,...

Page 20 - Using Windows 95 Dial-Up Networking; Networking, you will need to add this feature:

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card 2-12 2.4 Using Windows 95 Dial-Up Networking To use your Uniden Data 2000 modem with Windows 95 Dial-upNetworking, take the following steps: 2.4.1 Checking Dial-Up Networking Installation To determine if dial-up networking is already installed, double-click...

Page 21 - Insert Uniden Data 2000 Setup and Installation floppy disk or; Check the box for the; Unix Connection for Dial-Up

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Uniden Data 2000 Installation and Operation Manual 2-13 6. Insert Uniden Data 2000 Setup and Installation floppy disk or CD-ROM with rnaplus.inf . Check file path. Click OK . . 7. Check the box for the Unix Connection for Dial-Up Networking , then click Ins...

Page 23 - Right

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Uniden Data 2000 Installation and Operation Manual 2-15 2.4.5 Setting Up Dial-Up Networking for PPP Dial-Up Networking for PPP is automatically created when installingUD Host Application (Section 2.2) If the computer has installed multiple modems, make sure...

Page 24 - to create a new Windows 95

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card 2-16 7. Click Next , then click Finish to create a new Windows 95 connection icon named Pccard. 8. Click on Server Type . 9. From the Type of Dial-Up Server box, click on PPP : Windows 95 , Windows NT , Internet . 10. In the Advanced Options box, deselect L...

Page 26 - Installation Procedures/Windows 98; To install the Uniden Data 2000, take the following steps:

2-18 2.5 Installation Procedures/Windows 98 Follow the steps below to create Dial-up Networking to connect yourUniden Data 2000 to the Internet. To install the Uniden Data 2000, take the following steps: 1. Insert the Uniden Data 2000 into the PC Card slot of the host computer you are using. 2. Move...

Page 27 - Click; from the list and click

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Uniden Data 2000 Installation and Operation Manual 2-19 4. Select Display a list of all the drivers in a specific location , so you can chose the driver you want . Click Next . 5. Select Modem from the list and click Next .

Page 28 - dialog appears, change the drive; Copy manufacturer's files; such as

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card 2-20 6. Click Have Disk… 7. When Install From Disk dialog appears, change the drive name to an appropriate one in Copy manufacturer's files from such as D:\ for CD-ROM. Then click OK .

Page 30 - button on your Windows 98 desktop, then

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card 2-22 10. Click Finish . To check to see which COM port was selected during the setupprocess, take the following steps: 1. Click the Start button on your Windows 98 desktop, then select Settings , Control Panel . 2. Double-click the Modems icon. 3. Select Un...

Page 31 - the; Start

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Uniden Data 2000 Installation and Operation Manual 2-23 2.5.1 Verifying the Connection The host computer should display a Uniden Data 2000 icon in the system tray when the PC Card has made a proper connection. If youdo not see this icon on screen, take the ...

Page 32 - The following dialog box displays on screen:; Show contro; click

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card 2-24 The following dialog box displays on screen: 3 Select the Show contro l on taskbar check box, then click OK . If you have verified that the host computer has been set to display system tray icons, and you do not see the Uniden Data 2000 iconin the syst...

Page 33 - Using Windows 98 Dial-Up Networking; Installing Windows 98 Support for SLIP

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Uniden Data 2000 Installation and Operation Manual 2-25 2.6 Using Windows 98 Dial-Up Networking To use your Uniden Data 2000 modem with Windows 98 Dial-upNetworking, take the following steps: 2.6.1 Checking Dial-Up Networking Installation To determine if di...

Page 35 - dialog box, enter the IP Address; Name server addresses; . Enter the address as; Use IP header compression.

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Uniden Data 2000 Installation and Operation Manual 2-27 7. Select the Server tab. 8. Select SLIP: Unix Connection. 9. Deselect Log on to network . 10. Click TCP/IP Settings…. 11. From SLIP TCP/IP settings dialog box, enter the IP Address provided by your CD...

Page 36 - and select; My Computer; Check for a file called; PC Card PPP; (generated automatically during; Make New Connection

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card 2-28 2.6.5 Setting Up Dial-Up Networking for PPP Dial-Up Networking for PPP is automatically created when installingUniden Data 2000 host application (Section 2.2). If the computer hasinstalled multiple modems, be sure to click Connect Using and select Unid...

Page 38 - to create a new Windows 98 connection icon; to obtain the PC Card PPP

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card 2-30 6. Click Finish to create a new Windows 98 connection icon named PC Card PPP. 7. Right click on PC Card PPP to obtain the PC Card PPP screen. Select Properties .

Page 39 - and click

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Uniden Data 2000 Installation and Operation Manual 2-31 8. Deselect Use area code and Dialing Properties and click on the Server Types tab. 9. From the Type of Dial-Up Server box, select PPP : Internet , Windows NT Server , Windows 98 . 10. In the Advanced ...

Page 40 - and

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card 2-32 11. In the Allowed network protocols , deselect NetBEUI and IPX/SPX Compatible and select TCP/IP . 12. Click TCP/IP Settings . 13. From the TCP/IP Settings box, if you have been given the address of a Domain Name Server (DNS), select Specify name serve...

Page 43 - button on your Windows NT desktop, then

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Uniden Data 2000 Installation and Operation Manual 2-35 2.7.1 Verifying the Connection 1. Click the Start button on your Windows NT desktop, then select Settings , Control Panel . 2. Double-click the PC Card (PCMCIA) icon. The following dialog box displays ...

Page 44 - Using Windows NT Dial-up Networking; Install

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card 2-36 2.8 Using Windows NT Dial-up Networking To use your Uniden Data 2000 modem with Windows NT Dial-UpNetworking, take the following steps: 2.8.1 Checking Dial-up networking installation To determine if dial-up networking is already installed, double-click...

Page 46 - Insert a Uniden Data 2000 Setup and Installation floppy disk

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card 2-38 4. Click Have Disk… 5. Insert a Uniden Data 2000 Setup and Installation floppy disk or CD-ROM with the file ud2k.inf .

Page 47 - Select the COM port assigned to the Uniden Data 2000, then

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Uniden Data 2000 Installation and Operation Manual 2-39 6. Click Next . 7. Select the COM port assigned to the Uniden Data 2000, then click Next .

Page 48 - PC Card dialog; from the Control Panel,

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card 2-40 Note : If you do not remember the COM port assigned to the Uniden Data 2000, open PC Card dialog from the Control Panel, then click Properties for the UD2000 . It will show the COM port at the Device Map. 10. Click Finish .

Page 50 - . WindowsNT will copy all required files from

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card 2-42 14. Click Continue . WindowsNT will copy all required files from the Windows NT installation CD-ROM. 15. Click Restart . Note : Dial-Up Networking is part of the Remote Access Service (RAS). You must be an administrator to install RAS. You may take the...

Page 52 - in Network protocols.

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card 2-44 8. Select the Server tab. 9. From the Dial-Up server type box, select SLIP: Internet. 10. Check TCP/IP in Network protocols. 11. Click TCP/IP Settings .

Page 53 - box, enter the IP Address; Force IP header compression

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Uniden Data 2000 Installation and Operation Manual 2-45 12. From SLIP TCP/IP settings dialog box, enter the IP Address provided by your CDPD carrier. 13. If you have been given the address of a Domain Name Server (DNS), select Name server addresses . Enter ...

Page 54 - Installing Windows NT Support for SLIP; . Insert Uniden Data 2000 Setup and

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card 2-46 2.8.4 Installing Windows NT Support for SLIP 1. Click on the My Computer icon. 2. Select Control Panel . 3. Select Add/Remove Programs . 4. Select the Windows NT Setup tab. 5. Click Have Disk . Insert Uniden Data 2000 Setup and Installation disk or CD-...

Page 56 - in the

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card 2-48 9. From the Edit Phone book Entry dialog box, select the Basic tab. 10. Select Uniden Data 2000 PC Card Modem in the Dial using box. 11. Enter 0 in the Phone number box. 12. Select the Server tab. 13. From the Dial-up server type box, select PPP: Windo...

Page 57 - If you have been given the address of a Domain Name Server; Use IP header compression

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Uniden Data 2000 Installation and Operation Manual 2-49 16. If you have been given the address of a Domain Name Server (DNS), enter the address as your Primary DNS. Note : A DNS is needed to access sites by name, i.e. www.uniden.com. 17. Deselect Use IP hea...

Page 60 - or

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card 2-52 2.9 Installation Procedures/Windows CE Follow the steps below to create Dial-up Networking to connect yourUniden Data 2000 to the Internet. To install the Uniden Data 2000 Host Application for Windows CE, takethe following steps: 1. Establish the mobil...

Page 61 - Using Windows CE Remote Networking

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Uniden Data 2000 Installation and Operation Manual 2-53 2.10 Using Windows CE Remote Networking To use your Uniden Data 2000 Modem with Windows CE RemoteNetworking, take the following steps: 2.10.1 Installing Remote Networking 1. From the Start , click Prog...

Page 62 - Important

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card 2-54 3. Minimize the window and proceed with Windows CE Internet programs such as web browsers or e-mail. Note: If you cannot connect to the network, connect manually by opening the properties of Uniden Data 2000 Remote Networkand selecting Manual Dial . St...

Page 65 - Call your CDPD service provider and give them the EID to; Change IP Address; Enter the IP Address (NEI) given to your Uniden Data 2000 in; Default; to activate it. Click; Apply

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Uniden Data 2000 Installation and Operation Manual 2-57 6. Call your CDPD service provider and give them the EID to obtain an IP (NEI) of your Uniden Data 2000 as described inSection 2.1.3. Click Change IP Address . 7. Enter the IP Address (NEI) given to yo...

Page 66 - Select the side preference and click

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card 2-58 8. Click Next . 9. Select the side preference and click Next .

Page 67 - Wait for the Uniden Data 2000 to register to the Network.; IP Address; . Select an IP Address to ping and click; Start Ping; Back

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Uniden Data 2000 Installation and Operation Manual 2-59 10. Wait for the Uniden Data 2000 to register to the Network. Note: If it does not register to the network in a few minutes, go back to the IP Address display and check the IP Address . 11. When your U...

Page 69 - Comm Settings

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Uniden Data 2000 Installation and Operation Manual 2-61 Comm Settings The Comm Settings tab displays which COM Port the Uniden Data2000 is configured to, as well as the baud rate it is using. UDConfig searches for the Uniden Data 2000 upon startup. If it fi...

Page 70 - Network

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card 2-62 Network The Network tab provides settings that identify the Uniden Data 2000to its network. CDPD The CDPD tab provides settings that define how the Uniden Data 2000interacts with the CDPD network.

Page 71 - Default Tables

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Uniden Data 2000 Installation and Operation Manual 2-63 Default Tables The Default Tables tab provides the controls to load and/or save presettables of Uniden Data 2000 settings. Modem The Modem tab provides the modem type settings that define how theUniden...

Page 72 - Code Version

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card 2-64 Code Version The Code Version tab displays UDConfig’s code version, the Boot andsoftware versions which have been loaded in the Uniden Data 2000. Status Registered : Registration Status Reason : Registration Denied Reason Current Status : Current Modem...

Page 74 - To set the Polling rate of UDInsight, click the small; UDInsight; icon on the upper left corner of UDInsight dialog; Polling Rate; from the menu. The Polling

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card 2-66 ● The antenna icon has bars that represent 10 dB of RSSI, starting at -110. One bar is added for each 10 dB. ● The Cell Info button displays information regarding the spe-cific cell that the Uniden Data 2000 is currently attempting tocommunicate with. ...

Page 76 - Appendix: Specifications

A.1 Size Standard Portion 85 mm x 54 mm x 4.8 mm (3.37" x 2.12" x .19") Extended Portion 64.3 mm x 57.9 mm x 20 mm (2.53" x 2.28" x .70"), including battery compartment. A.2 Weight 141 g (5 oz), not including batteries. A.3 PCMCIA Interface PCMCIA Type II interface A.4 Data R...

Page 77 - Radio Specifications; Full Duplex; Environmental Specifications; 5 kV, with no electrical damage or impairment of function

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card A-7 Radio Specifications Transmit Frequencies 824 MHz-849 MHz Receive Frequencies 869 MHz - 894 MHz ● Full Duplex ● 0.6W transmit power ● Receiver sensitivity - 113 dBm The antenna must be maintained at least 4 inches (or 10 cm) from usersand nearby persons...

Page 78 - Printed References; Appendix: Additional References

B.1 Printed References Cellular Digital Packet Data System Specification, Release 1.1. January19, 1995. Available from the CDPD Forum, 401 N. Michigan Avenue,Chicago, IL 60611-4267. Phone: 800-335-2373. Sreetharan, M. and Kumar, Rajiv. Cellular Digital Packet Data. ArtechHouse 1996. ISBN 0-89006-709...

Page 79 - About Uniden Data 2000 Software; Uniden Data 2000 software has been factory installed.; 28 bit Key Data encryption software can only be used

C.1 About Uniden Data 2000 Software Uniden Data 2000 software has been factory installed. In most cases, you will not need to install software in your PC Card,however, there are some instances when software installation is required: ● You receive an upgraded version of the software. ● You wish to ch...

Page 80 - Requirements for Software Installation; Example

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card C.1.1 Requirements for Software Installation ● DNLD.EXE - A software downloading utility that can rununder both Windows 95/98 and Windows NT. ● PPCard dnl C.1.2 Uniden Data 2000 Software Downloading Instructions 1. Insert the Uniden Data 2000 to a PC Card s...

Page 83 - Uniden; D.1 Default Value Tables; AT; Appendix: AT Commands

As mentioned previously, AT commands allow an authorized user to: Read and modify configuration parameters supported by the Uniden Data 2000 . ● Query status and statistics. ● Change the modem’s operational modes. This chapter describes the following items, in detail: ● The modem’s Default Value Tab...

Page 86 - AT RESETCFG MDT

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card D-4 Note : You can type in the command AT RESETCFG MDT or AT&F0 followed by the command AT SAVECFG UDT or AT&W0 , at any time, to reset the UDT to the factory default state. Important : Editing the UDT does not require a password. D.2 System Table T...

Page 87 - D.3 AT Command Highlights; modem. Please note the; AT commands are NOT case sensitive.; D.4 Login and Logout Procedures; It is necessary to login before saving changes to the SPDT.; AT LOGIN; AT LOGOUT

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Uniden Data 2000 Installation and Operation Manual D-5 D.3 AT Command Highlights The tables on the following pages list the AT Commands which aresupported by the Uniden Data 2000 modem. Please note the following: ● When typing in AT commands, it is recommen...

Page 88 - D.5 AT Commands/Reading the Configuration; Read Data Compression Mode from

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card D-6 D.5 AT Commands/Reading the Configuration AT Command Syntax Description of Command AT ACTNEI? Read the current Active IP address from the System Table. Response : NEI n ddd.ddd.ddd.ddd AT BOOTVER? Read the version of the boot code fromthe System Table. ...

Page 89 - Read Data Encryption Mode from a

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Uniden Data 2000 Installation and Operation Manual D-7 AT Command Syntax Description of Command AT ENCR? Read Data Encryption Mode from a [CAT][MDT][UDT][SPDT] particular default table. (If the option is not specified, the CAT will be used as the default ta...

Page 91 - : Verbose 0 or Verbose 1

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Uniden Data 2000 Installation and Operation Manual D-9 AT Command Syntax Description of Command AT SWVER? or ATI1 Read the software code version downloaded in the Modem from theSystem Table. Data encrypted version: U-D_1000 (Version #) (Date Time)Non encryp...

Page 93 - AT SAVECFG

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Uniden Data 2000 Installation and Operation Manual D-11 D.6 AT Commands/Saving to a Table AT Command Syntax Description of Command AT SAVECFG Save the configuration in the current <SPDT><UDT> or active table to the Service Provider’s AT&W (S...

Page 94 - D.8 AT Commands/Reading Statistics and Status; Read the current RSSI value.

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card D-12 D.8 AT Commands/Reading Statistics and Status AT Command Syntax Description of Command AT$RSSI Read the current RSSI value. Response : CFG: Current RSSI: n D.9 AT Commands/Command/Control AT Command Syntax Description of Command AT Verifies that the AT...

Page 95 - Invokes the Ping application to test network

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Uniden Data 2000 Installation and Operation Manual D-13 AT Command Syntax Description of Command AT PING ip_addr Invokes the Ping application to test network [size] [I interval] connectivity and reports results; Optional is the size of the ping in bytes (64...

Page 96 - Reboot the computer

D.10 Error Messages There are a number of different error message responses that mayappear on screen in the event of an error. The following table reflectsthese error message responses, as well as the action(s) required to correct them. Error Message Response Action to Correct Error System errors: R...

Page 97 - Reenter the password being used.

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Uniden Data 2000 Installation and Operation Manual D-15 Error Message Response Action to Correct Error "Default table does not exist" Check the default table to see if correct table has been selected. "Invalid Password" Reenter the password ...

Page 98 - One Year Limited Warranty; WARRANTOR: UNIDEN AMERICA CORPORATION; LEGAL REMEDIES; PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY

E.1 One Year Limited Warranty Important : Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and c...

Page 99 - Troubleshooting; Appendix: Troubleshooting

F.1 Troubleshooting Please contact Uniden Customer Service Center at 1-888-6-UNIDEN. Also, please consult the UD2000 Help.doc included on the Installation& Operation CD-ROM, or go to the Troubleshooting Page for theUD2000 at www.uniden.com. ▲ ▲ Uniden Data 2000 Wireless CDPD PC Card Appendix: Tr...