Uniden BT229 - Manuals - manualsarea.com

Page 2 - Getting to Know the Headset; What the LED colors mean

Getting to Know the Headset What the LED colors mean Color State Meaning Red Steady The headset is currently charging. When the battery is fully charged, the LED turns off. Flashing The headset is turned off. If the headset is also beeping, the battery is low. Blue Flashing The headset is turned on....

Page 3 - What the buttons do

What the buttons do The headset initiates the function only after the button is released. Press it to Press & hold it for 2 seconds to 4 seconds to Multi-function button ( MFB ) In standby: Redial the most recently dialed number.During an incoming call: Answer the call.During a call: Hang up. In...

Page 4 - Setting Up Your Headset; Charge the battery; connect automatically whenever they can detect each other.

Setting Up Your Headset Charge the battery Before using your headset, charge the battery until the red LED is solid on (about hours). Charging the battery completely (and keeping it charged) will help you get the longest possible talk and standby time out of the battery. Connect the adapter to the p...

Page 5 - or; If the blue LED flashes once every 5 seconds, the headset is

5 Make sure the headset is powered off and the power adapter is not connected (you can’t use the headset while it’s charging).Press and hold MFB until the LED flashes alternating red and blue (approximately 6 seconds), then release. The headset is in pairing mode and should be visible to other Bluet...

Page 6 - Connect to your phone; additional Bluetooth information.; Once the headset is paired:; automatically. To manually reconnect, press; Using Your Headset; To turn the headset on, press and hold; until the blue LED flashes and; Turning the; Press and hold; until the red LED flashes and you hear the turn-off

6 Connect to your phone Most phones connect to the headset as soon as you pair it; if yours won’t, turn the headset off and back on. If headset still won’t connect, check your phone’s owner’s manual for additional Bluetooth information. Once the headset is paired: Whenever you turn the headset on, i...

Page 8 - Available Features; After the headset is connected, you can use the following features:

Available Features After the headset is connected, you can use the following features: Make a call Make the call from your mobile phone as usual; your phone should automatically send the call to the headset; if it doesn’t, press and hold MFB for seconds to send the call to the headset manually. Answ...

Page 9 - Call Waiting; provider, and your phone must support the hands-free profile.; Voice-activated dialing; To use this feature, your phone must support voice dialing, and

9 Call Waiting To use this feature, you must subscribe to Call Waiting through your service provider, and your phone must support the hands-free profile. To put your current call on hold and switch to a waiting call, press and hold Up until you hear beeps (about seconds). When you release the button...

Page 10 - Using the Multipoint Function; pairing to more than one phone; answer the incoming call, press; for about seconds.

10 Using the Multipoint Function The headset supports simultaneous connection with mobile phones with full control of each one. (This feature may not be compatible with some mobile phones.) pairing to more than one phone Pair the headset to the first phone following the instructions on page 6. When ...

Page 11 - Troubleshooting and Maintenance

Troubleshooting and Maintenance If you have problems with the headset, see the suggestions in the table below. If these suggestions don’t help, contact customer support (see the cover for contact information). If... Try... The headset won’t turn on. Charging the battery completely. • The headset won...

Page 12 - General Information; Battery life

General Information You cannot use the headset while it is recharging. Bluetooth wireless devices have a maximum range of 0 feet (10 m); the actual range varies depending on current conditions (obstacles, battery power, interference, etc.). The headset can be connected only to devices that support t...

Page 13 - Safety and Handling Information; Cleaning the headset; Important Safety Instructions

Safety and Handling Information For maximum product life, do not drop, throw, or crush the headset. Do not expose it to humidity, dust, or temperatures above 15 F. Cleaning the headset If necessary, remove the earhook. Dampen a lint- free cloth with water or a cleaner specially designed for electron...

Page 14 - FCC Notice

Use only the power cord and batteries indicated in this manual. Do not expose the battery (or the device) to flames or dispose of it in a fire: the battery may explode. Check with local authorities for possible battery disposal instructions. Do not disassemble, modify, or attempt to repair any compo...

Page 15 - IMPORTANT NOTE: Radiation Exposure Statement; Lithium-polymer battery information; Two-Year Limited Warranty

interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying...