Tyan S2665 - Manuals - manualsarea.com

Page 2 - Attaching IDE and Floppy Drive Cables; Before you begin...

2 http://www.TYAN.com Table of Contents Before you begin… Chapter 1: Introduction 1.1 Congratulations 1.2 Hardware Specifications Chapter 2: Board Installation 2.0 Board Image 2.1 Board Parts, Jumpers and Connectors 2.2 Jumper and Connector Settings 2.3 AUX Audio and CD Audio Connector 2.4 Enable/Di...

Page 3 - Check the box contents!; x 34-Pin floppy drive cable

3 http://www.TYAN.com Check the box contents! The retail motherboard package should contain the following: 1x Thunder i7505 S2665 1x 34-Pin floppy drive cable 1x Ultra160/320 LVD SCSI cable (if optional SCSI included) 1x Ultra-D M A-100/66/33 IDE cable 1x Thunder i7505 S2665 User’s Manual 1x TYAN dr...

Page 4 - Chapter 1: Introduction

4 http://www.TYAN.com Chapter 1: Introduction 1.1 – Congratulations! You are now the owner of one of the most advanced dual Intel Xeon processor solutions available: the Thunder i7505 S2665. Based on Intel's E7505 chipset, the Thunder i7505 S2665 is Hyper-Threading ready - utilizing onboard resource...

Page 6 - Chapter 2: Board Installation; Installation; board was shipped in.; NOTE

6 http://www.TYAN.com Chapter 2: Board Installation Installation You are now ready to install your motherboard. The mounting hole pattern of the Thunder i7505 S2665 matches the EEB V3.0 specification. Before continuing with installation, confirm that your chassis supports a standard EEB V3.0 motherb...

Page 7 - The following is an image of the S2665.

7 http://www.TYAN.com 2.0 – Board The following is an image of the S2665. This picture is representative of the latest board revision available at the time of publishing. The board you receive may or may not look exactly like the above picture. The following page includes details on the vital compon...

Page 11 - CLOSE Pins 1 and 2

11 http://www.TYAN.com 2.6 – PS/2 ACPI Jumper (J12) pin-3 CLOSE Pins 1 and 2 (Default) To disable PS/2 devices’ ACPI wake up function pin-3 CLOSE Pins 2 and 3 To enable PS/2 devices’ ACPI wake up function 2.7 – Rear Panel USB ACPI Jumper (J14) pin-3 CLOSE Pins 1 and 2 (Default) To disable rear panel...

Page 16 - supported

16 http://www.TYAN.com 2.20 – Mounting the Motherboard Before installing your motherboard, make sure your chassis has the necessary motherboard support studs installed. These studs are usually manufacturer pre -installed, metal and are gold in color. If you are unsure of stud placement, lay the moth...

Page 18 - for latest processor support:; REMINDER; Only; identical; Place the socket lever back down until it snaps into place.; Heatsink Installation

18 http://www.TYAN.com 2.22 – Installing the Processor(s) and Heatsink(s) Your Thunder i7505 S2665 supports the latest processor technologies from Intel. Check the following page on TYAN’s website http://www.tyan.com for latest processor support: The following diagrams will detail how to install you...

Page 20 - unplug the power supply before performing system hardware; Connecting External Devices; , make sure everyth ing is properly

20 http://www.TYAN.com Finishing Installing the Heatsink After you finish installing the heatsink onto the processor and socket, attach the end wire of the fan (which should already be attached to the heatsi nk) to the motherboard. The following diagram illustrates how to connect fans onto the mothe...

Page 21 - Connects to an external microphone; SPDIF RCA connector

21 http://www.TYAN.com 2.24 – Connecting External Devices The following diagrams will detail the rear port stack for this S2665 motherboard: a. Audio Port Line In Jack Connects to external devices for playback or recording Line Out Jack Connects to headphone or speakers (Amplifier integrated) Microp...

Page 35 - Appendix I: Glossary; a power management specification that

35 http://www.TYAN.com Appendix I: Glossary ACPI (Advanced Configuration and Power Interface): a power management specification that allows the operating system to control the amount of power distributed to the computer’s devices. Devices not in use can be turned off, reducing unnecessary power expe...

Page 39 - Technical Support

39 http://www.TYAN.com Technical Support If a problem arises with your system, you should turn to your dealer for help fi rst. Your system has most likely been configured by them, and they should have the best idea of what hardware and software your system contains. Furthermore, if you purchased you...

Page 40 - Notice for the USA; This device may not cause harmful interference, and

40 http://www.tyan.com Notice for the USA Compliance Information Statement (Declaration of Conformity Procedure) DoC FCC Part 15: This device complies with part 15 of the FCC Rule s Operation is subject to the following conditions: 1) This device may not cause harmful interference, and 2) This devic...