Turbosound TQ-445DP - Manuals

u s e r m a n u a l QLight™ DP series QLight DP series manual page 6 Important Safety Information Please read carefully and keep the following instructions and safety information. Heed all warnings and follow all instructions. Do not remove covers. There are no user serviceable parts inside, please ...

u s e r m a n u a l QLight™ DP series QLight DP series manual page 7 INTRODUCTION Thanks Thank you for choosing a QLight™ series loudspeaker product for your application. Please spare a little time to read the contents of this manual, so that you can obtain the best possible performance from this un...

u s e r m a n u a l QLight™ DP series QLight DP series manual page 8 FEATURES • Superb audio quality: carefully designed and matched loudspeaker drive units are used to give you exceptional performance and many years of reliable, trouble free operation. • Class D amplifiers with 96kHz DSP: operating...

u s e r m a n u a l QLight™ DP series QLight DP series manual page 9 PRODUCT RANGE SUMMARY TQ-308DP self-powered two-way loudspeaker The TQ-308DP is a compact trapezoidal self-powered two-way loudspeaker enclosure with an integral Class D amplifier and DSP module, designed for use in mobile speech a...

u s e r m a n u a l QLight™ DP series QLight DP series manual page 10 TQ-308DP and TQ-310DP connector panel functions 1. Signal input – lockable 3-pin XLR line input socket connects to audio mixer. Fully balanced, pin 2 Hot, pin 3 Cold and pin 1 not connected. 2. Signal link – lockable 3-pin XLR lin...

u s e r m a n u a l QLight™ DP series QLight DP series manual page 11 TQ-315DP self-powered two way loudspeaker The TQ-315DP offers full range response and the highest performance from a two-way loudspeaker. The integrated Class D amplifiers and DSP ensure an optimum match between amplifiers and dri...

u s e r m a n u a l QLight™ DP series QLight DP series manual page 12 TQ-315DP and TQ-445DP connector panel functions 1. AUX connection – RS232 port used for updating settings or firmware. 2. Signal link – lockable 3-pin XLR line input socket connects to audio mixer. Fully balanced, pin 2 Hot, pin 3...

u s e r m a n u a l QLight™ DP series QLight DP series manual page 14 TQ-425DP connector panel functions 1. Aux – RS232 port used for updating settings or firmware. 2. Gain control – gain trim control ranges from +6dB to -6dB 3. Signal input – lockable 3-pin XLR line input socket connects to audio m...

u s e r m a n u a l QLight™ DP series QLight DP series manual page 15 TQ-115DP connector panel functions 1. Signal input – lockable 3-pin XLR line input socket connects to audio mixer. Fully balanced, pin 2 Hot, pin 3 Cold and pin 1 not connected. 2. Signal link – lockable 3-pin XLR line output sock...

u s e r m a n u a l QLight™ DP series QLight DP series manual page 16 SYSTEM REQUIREMENTS System requirements – TQ-308DP, TQ-310DP and TQ-315DP These products are two-way self-powered loudspeaker systems. They comprise two independent amplifier channels: one channel to power the low frequency driver...

u s e r m a n u a l QLight™ DP series QLight DP series manual page 17 AMPLIFIER MODULES Power Amplifiers The digital power amplifiers used in QLight™ DP series loudspeakers are conservatively rated and designed with sufficient headroom to handle large signal transients without break-up or distortion...

u s e r m a n u a l QLight™ DP series QLight DP series manual page 18 Limiting Functions The amplifier modules are equipped with accurate limiters for both high frequency and low frequency sections. Because the HF and LF limiters work independently of each other, there is no possibility of either se...

u s e r m a n u a l QLight™ DP series QLight DP series manual page 19 Mode A / Mode B switch This rear panel switch modifies the overall response of the system in order to give you optimised profiles for differing applications. When the Mode A position is selected, the low frequency section is exten...

u s e r m a n u a l QLight™ DP series QLight DP series manual page 20 CONVERGING ELLIPTICAL WAVEGUIDES ™ A design feature of the TQ-308DP, TQ-310DP and TQ-315DP loudspeakers is the Converging Elliptical Waveguide ™ (CEW ™ ). This gives many user advantages. The comparatively short flare length allow...

u s e r m a n u a l QLight™ DP series QLight DP series manual page 21 MOUNTING AND FIXING Rigging Hardware A versatile range of mounting hardware is available that allows enclosures to be used in a variety of ways, in either mobile applications or permanent installations. A top hat stand type fittin...

u s e r m a n u a l QLight™ DP series QLight DP series manual page 23 The FB-12 flybar assembly comes supplied with a U-6 Unilock fitting, which provides a single attachment point. The point at which the Unilock is attached to the flybar determines the vertical angle of the loudspeaker as shown in t...

u s e r m a n u a l QLight™ DP series QLight DP series manual page 24 Flying frames are avail able for use with the TQ-308DP, TQ-310DP and TQ-445DP. These enable the cabinets to be installed in semi-permanent applications with the maximum of security. They provide considerable variation of horizonta...

u s e r m a n u a l QLight™ DP series QLight DP series manual page 26 MAINTENANCE If any of the drive units should cease functioning you are advised to remove the faulty unit from the cabinet and send it to a professional service centre authorised to recone Turbosound loudspeakers. This will ensure ...

u s e r m a n u a l QLight™ DP series QLight DP series manual page 27 from the low frequency driver. Depending on which section needs servicing, the appropriate drive unit should be returned to an authorised Turbosound service centre. To reinstate the drivers, simply reverse the above procedure maki...

u s e r m a n u a l QLight™ DP series QLight DP series manual page 28 from the cabinet. WARNING - this unit is heavy! Disconnect the cables from the loudspeaker terminals and completely remove the driver from the cabinet. Make a note of the driver polarity for later reconnection. To reinstate the dr...

u s e r m a n u a l QLight™ DP series QLight DP series manual page 29 APPENDIX A: SPARES AND ACCESSORIES CD-114 1” (25mm) HF compression driver TQ-445DP CD-110 1” (25mm) HF compression driver TQ-308DP, TQ-310DP CD-208 1.4” (35mm) HF compression driver TQ-315DP LS-1018 10” (254mm) LF loudspeaker TQ-3...

u s e r m a n u a l QLight™ DP series QLight DP series manual page 30 APPENDIX B: TECHNICAL SPECIFICATIONS TQ-308DP TQ-310DP TQ-315DP Dimensions 464mm x 270mm x 301mm (18.3” x 10.6” x 11.8”) 525mm x 315mm x 300mm (20.7” x 12.4” x 11.8”) 691mm x 443mm x 420mm (27.2” x 17.4” x 16.5”) Net weight 15.5kg...

u s e r m a n u a l QLight™ DP series QLight DP series manual page 32 APPENDIX C: WARRANTY Limited Warranty This Turbosound loudspeaker product is warranted to the original end-user purchaser and all subsequent owners for a period of one (1) year for electronics assemblies and two (2) years for loud...

u s e r m a n u a l QLight™ DP series QLight DP series manual page 33 Incidental and consequential damages Turbosound's liability is limited to the repair or replacement, at our option, of any defective product, and shall not be liable for any incidental and consequential damages including, without ...