Troy-Bilt 569- Manuals

5 The cutting blade continues to rotate for a few seconds after the engine is shut off. Never place any part of the body in the blade area until you are sure the blade has stopped rotating. 20. Never operate mower without proper trailshield, discharge cover, grass catcher, blade control handle, or o...

6 3 Setup and Adjustment 1. Remove any packing material which may be between upper and lower handles. a. Pull up and back on upper handle as shown in Step 1. Make certain the lower handle is seated securely into the handle mounting brackets. b. Tighten star knobs securing upper handle to lower handl...

7 Step 7 CUTTING HEIGHT All wheels must be placed in the same position. GRASS CATCHER Make certain bag is turned right side out before assembling (warning label will be on the outside). 3 Setup and Adjustment Step 8 Never operate mower unless the hooks on the grass catcher are firmly seated on the p...

8 4 Operating Your Lawn Mower Now that you have set up your lawn mower, it’s important to become acquainted with its controls and features. Blade Control The blade control is attached to the upper handle of the mower. Depress and squeeze it against the upper handle to operate the unit. Release it to...

9 4 Operating Your Lawn Mower WARNING The operation of any lawn mower can result in foreign objects being thrown into the eyes, which can damage your eyes severely. Always wear safety glasses while operating the mower, or while performing any adjust-ments or repairs on it. Be sure no one other than ...

10 5 Maintaining Your Lawn Mower WARNING Always stop engine, disconnect spark plug, and ground against engine before cleaning, lubricating or doing any kind of maintenance on your machine. We do not recommend the use of pressure washers or garden hose to clean your unit. These may cause damage to el...

11 5 Maintaining Your Lawn Mower WARNING When removing the cutting blade for sharpening or replacement or when sliding the belt around it, protect your hands with a pair of heavy gloves or use a heavy rag to hold the blade. An unbalanced blade will cause excessive vibration when rotat-ing at high sp...

12 For repairs beyond the minor adjustments listed here, contact an authorized service dealer. 6 Trouble Shooting Cause Problem Remedy Engine fails to start 1. Blade control disengaged.2. Spark plug wire disconnected.3. Fuel tank empty or stale fuel.4. Fuel valve closed.5. Faulty spark plug.6. Block...

13 Off-Season Storage WARNING DO NOT remove safety (or any) labels from mower for any reason. 7 Off-Season Storage & Safety Labels Safety Labels Found On Your Lawn Mower The following steps should be taken to prepare your lawn mower for storage. 1. Clean and lubricate mower thoroughly as describ...

15 8 Parts List Ref. Part No. Description 1 687-02193 Height Adj. Assembly - LH 687-02194 Height Adj. Assembly - RH 2 750-04405 Sleeve Spacer 1.8” Long 3 618-04377 Transmission 4 750-04404 Sleeve Spacer 9.10” Long 5 782-5002B Front Baffle 6 712-04065 Flange Lock Nut, 3/8-16 7 732-0708 Bearing Retain...

The limited warranty set forth below is given by Troy-Bilt LLC with respect to new merchandise purchased and used in the United States, its posses-sions and territories.“Troy-Bilt” warrants this product against defects in material and workman-ship for a period of two (2) years commencing on the date...

5 The cutting blade continues to rotate for a few seconds after the engine is shut off. Never place any part of the body in the blade area until you are sure the blade has stopped rotating. 20. Never operate mower without proper trailshield, discharge cover, grass catcher, blade control handle, or o...

6 3 Setup and Adjustment 1. Remove any packing material which may be between upper and lower handles. a. Pull up and back on upper handle as shown in Step 1. Make certain the lower handle is seated securely into the handle mounting brackets. b. Tighten star knobs securing upper handle to lower handl...

7 Step 7 CUTTING HEIGHT All wheels must be placed in the same position. GRASS CATCHER Make certain bag is turned right side out before assembling (warning label will be on the outside). 3 Setup and Adjustment Step 8 Never operate mower unless the hooks on the grass catcher are firmly seated on the p...

8 4 Operating Your Lawn Mower Now that you have set up your lawn mower, it’s important to become acquainted with its controls and features. Blade Control The blade control is attached to the upper handle of the mower. Depress and squeeze it against the upper handle to operate the unit. Release it to...

9 4 Operating Your Lawn Mower WARNING The operation of any lawn mower can result in foreign objects being thrown into the eyes, which can damage your eyes severely. Always wear safety glasses while operating the mower, or while performing any adjust-ments or repairs on it. Be sure no one other than ...

10 5 Maintaining Your Lawn Mower WARNING Always stop engine, disconnect spark plug, and ground against engine before cleaning, lubricating or doing any kind of maintenance on your machine. We do not recommend the use of pressure washers or garden hose to clean your unit. These may cause damage to el...

11 5 Maintaining Your Lawn Mower WARNING When removing the cutting blade for sharpening or replacement or when sliding the belt around it, protect your hands with a pair of heavy gloves or use a heavy rag to hold the blade. An unbalanced blade will cause excessive vibration when rotat-ing at high sp...

12 For repairs beyond the minor adjustments listed here, contact an authorized service dealer. 6 Trouble Shooting Cause Problem Remedy Engine fails to start 1. Blade control disengaged.2. Spark plug wire disconnected.3. Fuel tank empty or stale fuel.4. Fuel valve closed.5. Faulty spark plug.6. Block...

13 Off-Season Storage WARNING DO NOT remove safety (or any) labels from mower for any reason. 7 Off-Season Storage & Safety Labels Safety Labels Found On Your Lawn Mower The following steps should be taken to prepare your lawn mower for storage. 1. Clean and lubricate mower thoroughly as describ...

15 8 Parts List Ref. Part No. Description 1 687-02193 Height Adj. Assembly - LH 687-02194 Height Adj. Assembly - RH 2 750-04405 Sleeve Spacer 1.8” Long 3 618-04377 Transmission 4 750-04404 Sleeve Spacer 9.10” Long 5 782-5002B Front Baffle 6 712-04065 Flange Lock Nut, 3/8-16 7 732-0708 Bearing Retain...

The limited warranty set forth below is given by Troy-Bilt LLC with respect to new merchandise purchased and used in the United States, its posses-sions and territories.“Troy-Bilt” warrants this product against defects in material and workman-ship for a period of two (2) years commencing on the date...