Tricity Bendix TDF 221 - Manuals

5 Start / cancel button ● Starting the washing programme: 1. Select a washing programme.2. Press the start / cancel button (corresponding light on). IMPORTANT! Once the programme has started, if you want to change the selection madeyou must cancel the washing programme in progress. ● Cancel the wash...

6 Programme Use Cycle description Programme table POWER WASH 70° Heavy soil. Prewash - Main wash 1 Crockery, cutlery, 2 intermediate rinses - pots and pans Final rinse - Dry RINSE & HOLD Any. Prewash 5 Partial load (to be completed later in the day). This programme does not require the use of de...

7 Before the first use When using separate special(dishwasher) salt, rinse aid anddetergent: - set the water softener- add special (dishwasher) salt- fill up with rinse aid When using tablets that integraterinse aid and detergent: there is no need to fill up with rinse aid- set the water softener- a...

8 Water hardness Number of flashes of the Adjustment of the water “end of programme” light hardness setting in Clarke 1) in °TH 2) in mmol/l 3) manually electronically 64 - 88 91 - 125 9,0 - 12,5 10 2 level 10 53 - 63 76 - 90 7,6 - 8,9 9 2 level 9 46 - 52 65 - 75 6,5 - 7,5 8 2 level 8 36 - 45 51 - 6...

9 Setting the water softener electronically (see table) The dishwasher mustbe switched off Release the button. The End light will flash. The number of flashescorresponds to currentlevel set. The End light might flash 5 times, forexample. The flashing isrepeated every 5seconds. To change the level,pr...

10 Filling with dishwasher salt Only before filling withsalt for the first time , fill the salt containerwith water Using the funnelprovided, pour in thesalt until the container isfilled with salt. Remove any trace ofsalt. Replace the cap tightlyturning it clockwise untilit stops with a click. CAUTI...

11 IMPORTANT! Top up the rinse aid when the light on thecontrol panel illuminates. Filling with rinse aid Open the lid. Fill up with rinse aid.The maximum level forfilling is indicated by " max " . Clean up any rinse aidwhich overflows. Closethe lid and press until itlocks. CAUTION! Never fi...

12 Loading cutlery and dishes ● The following items are not suitable for use in the dishwasher:- Cutlery with wooden, horn, china or mother-of-pearl handles - Plastic items that are not heat resistant- Older cutlery with glued parts that are not temperature resistant - Bonded cutlery items or dishes...

13 Load upper basket.Light items (plasticbowls etc.) must beloaded in the upperbasket and arranged sothey do not move. For taller items, the cupracks can be foldedupwards. If plates are to be loaded in the upperbasket: load them starting from the rear positions;tilting them slightly forwards and avo...

15 Cleaning and care IMPORTANT! NEVER use the dishwasher without filters.Incorrect repositioning and fitting of the filters will produce poor washing results. Cleaning the filters Clean filters A , B and C thoroughly underrunning water. Turn the handle about 1 / 4 turn anticlockwise and remove filte...

16 External cleaning Clean the external surfaces of the machine andcontrol panel with a damp soft cloth. Ifnecessary use only neutral detergents. Neveruse abrasive products, scouring pads orsolvent (acetone, trichloroethylene etc....). Ensure that the seals around the door, thedetergent and rinse ai...

17 Something not working IMPORTANT! The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solvedwith the help of the indications described in the chart, without calling out an engineer.Switch off the dishwasher...

18 The wash results are not satisfactory The dishes are not clean ● The wrong washing programme has been selected. ● The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. ● The spray arm do not rotate freely due to incorrect ar...

20 Hints for test institutes Testing in accordance with EN 60704 must be carried out with appliance fully loaded andusing the test programme (see "Consumptionvalues"). Test in accordance with EN 50242 must be carried out when the salt container and rinseaid dispenser have been filled with sa...

21 Installation CAUTION! If the machine is connected to new pipes or pipes which have not been used for a long time, youshould run the water for a few minutes before connecting the inlet hose. Inlet hose Connect the inlet hose to a water tap with anexternal thread of 3/4”.The inlet hose can be turne...

22 Ensure that the hosesare not kinked, crushedor entangled. CAUTION! Always be sure, that there is no water leakagefrom hoses and their connections after theinstallation. WARNING! Multi-way plugs, connectors and extensioncables must not be used. This could constitutea fire hazard through overheatin...

23 Fitting under a counter By removing the dishwasher’s worktop, youcan install it under a close fitting sink unit or apre-existing top. Be sure that once the appliance has beeninstalled, it is easily accessible for the serviceengineer in the event that a repair is required. Unscrew the two screwsat...

In the event of your appliance requiringservice, or if you wish to purchase spare partsplease contact your local Service Force Centreby telephoning: 08705 929929 Your telephone call will be automatically routedto the Service Force Centre covering your postcode area. For the address of your local Ser...

25 Guarantee conditions Standard Guarantee Conditions We, Tricity Bendix, undertake that if within 12months of the date of purchase this TricityBendix appliance or any part thereof is provedto be defective by reason only of faultyworkmanship or materials, we will, at ouroption repair or replace the ...

26 European guarantee This appliance is guaranteed by Electrolux, ineach of the countries listed in the followingpage, for the period specified in the applianceguarantee or otherwise by law. If you movefrom one of these countries to another of thesecountries the appliance guarantee will movewith you...