Page 3 - Keep this instruction book for future
3 IMPOR IMPOR T T ANT S ANT S AFET AFET Y INS Y INS TR TR UCTIONS UCTIONS These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of the meanings or...
Page 4 - Instructions for the User
4 CONTENT CONTENT S S Instructions for the User Guide to use the instruction book 2 Important Safety Information 3 Instructions for the User 5 General Information 5 Description of the Appliance, main parts 5 Indicator Lights 6 Fast Freeze Facility 6 Basket Storage 6 Freezer Tray 6 Cold Accumulation ...
Page 5 - General information
5 INS INS TR TR UCTIONS F UCTIONS F OR THE USER OR THE USER General information This appliance is designed for the freezing and storage of frozen food in a domestic home. To ensure correct operation, the appliance should be located where the ambient temperature is between 16-32 °C. Description of th...
Page 6 - Indicator Lights; Fast Freeze Facility; Basket Storage
6 Indicator Lights The indicator Lights are situated in the control panel. a.) Green Indicator Light When the appliance is switched on at the mains the green indicator light will glow and continue to glow until the appliance is switched off at the mains. b.) Red Indicator Light A few hours after sta...
Page 7 - Using the Appliance; Before Use; To Start the Appliance
7 Using the Appliance Before Use Remove all packaging and securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0,5 litre of water). Do not use soap or detergent as the smell may linger. Dry thoroughly. Do not use detergents, abrasive powders, highly perfumed...
Page 8 - Frozen Food Storage; Thawing; To Make Ice Cubes; Food Storage
8 3. After 24 hours, slide the 'fast freeze' switch back to the left (the yellow light will go out) and transfer the food to the storing compartments. The freezer will return to normal storage temperature. If the 'fast freeze' switch is accidentally left on, the freezer will not be damaged, but ener...
Page 9 - Maint
9 Energy Saving Advice Do not install the appliance close to sources of heat, such as a boiler or radiator.Locate the appliance in a cool well ventilated room and make sure that the air openings of the appliance are not obstructed.Avoid unnecessary frosting in the cabinet by packing all foodstuffs i...
Page 10 - Something Not Working
10 Problem No power to the appliance The temperature in the appliance is too high The temperature in the appliance is too lowExcessive frost and ice has built up The appliance is noisy. Possible Cause No power at the socket.There is a power cut. The fuse has blown.Thermostat control is set at 0.Th...
Page 12 - Ins; Installing the appliance; Transportation, unpacking
12 EXCLUSIONS This Guarantee does not cover: Damage or calls resulting from transpor tation, improper use or neglect, the replacement of any light bulbs or removable parts of glass or plastic. Costs incurred for calls to put right an appliance improperly installed or calls to appliances outside the ...
Page 13 - Cleaning; Location; Ventilation Requirements
13 Cleaning Clean the accessories and the inside of the appliance with warm water and bicarbonate of soda (5 ml to 0.5 litres of water). Rinse and try thoroughly. Do not use detergents, abrasive powders, highly perfumed cleaning products, wax polishes or cleaning products containing bleach or alcoho...
Page 14 - Leveling; Door Reversal
14 Leveling The appliance must be level. Level the appliance by adjusting the two adjustable feet (1) at the front of the appliance. Door Reversal If required the opening direction of the door can be changed as follows: Disconnect the appliance from the electricity supply.Tilt the appliance backward...
Page 15 - Electrical Connection
15 Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. This appliance must be earthed. The manufacturer declines any liability should these safety measures not be observed. Electrical Requirements Before switching on, make sure...