Tricity Bendix DH 086 - Manuals

5 Before using your dishwasher for the firsttime: 1. Ensure that the electrical and water connections comply with the installation instructions. 2. Remove all packaging from inside the appliance. 3. Set the water softener. 4. Pour 1 litre of water inside the salt container and then fill with salt. 5...

6 Filling with salt Only use salt specifically designed for use in dishwashers.All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes (not the Ri...

7 Rinse aid Rinse aid is automatically added during the last rinse,ensuring thorough rinsing, and spot and streak free drying.The dispenser, which is positioned inside the door, holdsabout 110 ml of rinse aid, which is sufficient for 16 - 40dishwashing programmes, depending upon the dosagesetting. F...

8 Loading your appliance Before placing dishes in the machine, remove any scraps offood, to avoid clogging the filters and consequently reducingthe performance. Do not load very small items which can fall through the baskets. Open the door and slide out the baskets to load the dishes. The lower bask...

9 The upper basket The upper basket is designed for plates (dessert plates,saucers, dinner plates of up to 24 cm in diameter), saladbowls, cups and glasses. Larger plates (dinner plates up to 24 cm in diameter) mustbe loaded in the front part of the upper basket. Arrange items on and underneath the ...

10 Use of detergent Only use detergents specifically designed for use in dishwashers. We recommend the use of Finish detergents which areavailable in the following options: Finish Double Action Tablets. Each tablet has the exactamount of detergent required, simply place in the dispenser. Finish Powd...

11 To save energy Place dishes in the machine immediately after every mealand wait until the dishwasher is full before washing. If necessary run the Rinse and Hold programme (see"Washing Programmes" chart) so that any food scraps donot become caked on the dishes while you are waiting to runt...

12 Programme Degree of soil Starting position of the programmer Required push button Recommended quantity of detergent Cycle description Washing programmes Cold prewashMain wash up to 65°C2 cold rinses1 hot rinse Main wash up to 65°C1 cold rinse2 hot rinses Main wash up to 65°C2 cold rinses 1 cold r...

13 1. Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning"). 2. Check that there is rinse aid and salt 3. Load the dishes Remove any scraps of food. Pull the lower basket out and arrange the saucepans, plates and cutlery in it. Pull the upper basket...

14 Internal cleaning Ensure that the seals around the door, the detergent andrinse aid dispensers are cleaned regularly with a damp cloth. We recommend the use of Finish Dishwasher Cleanerevery 3 months or run a 65°C wash without dishes usingdetergent. Regular use of Finish Dishwasher Cleaner cleans...

15 Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out anengineer. Before contacting your local Service Force Centre, please carry out the checks listed below.Important: If you call out an engineer to a fault listed below or to repair ...

16 Hints for test centres Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aiddispenser. Test standard EN 50242 Reference programme: POWER WASH 65°C Load: 8 standard place settings Rinse aid selector: position 4 Detergent dosage : ...

17 Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Remove all packaging before positioning the machine. ...

18 Electrical connection This appliance must be earthed.The manufacturer declines any responsibility should this safety measure not be observed. If the plug that is fitted to your appliance is not suitable forthe socket, it must be cut off and the appropriate plug fitted. ImportantThe wires on the m...

19 Adjusting the worktop You can move the worktop forward or backward by 25 mm inorder to align the machine with other kitchen units. Simply unscrew the two front retaining screws, move the topto the required position and then retighten the screws. Fitting under a counter (kitchen worktop or sink) B...

152995 62/3 Tricity Bendix, 55-77 High Street, Slough, Berkshire, SL1 1DZ Customer care telephone number... 08705 950 950 © Electrolux Household Appliances Limited 2001 From the Electrolux Group. The world’s No.1 choice. The Electrolux Group is the world’s largest producer of powered appliances for ...