Page 2 - Instruction Book - Part 1; Contents; DISHWASHER; Installation; Important safety information
1 Instruction Book - Part 1 - Before use - Maintenance - Installation Contents Before use 2 Setting the water softener 2 Filling with salt 2 Filling with rinse aid and adjusting the dose 3 Use of detergent 3 Hints and tips 4 Maintenance and cleaning 5 Internal cleaning 5 Cleaning the filters 5 Exter...
Page 3 - Setting the water softener; Before use
Before using your dishwasher for thefirst time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance3. Set the water softener4. Pour 1 litre of water inside the salt container and then fill with salt 5. Fill t...
Page 4 - Use of detergent; If using powder detergents proceed as follows:; Compact detergents with enzymes
Rinse aid Rinse aid is automatically added during the last rinse,ensuring thorough rinsing, and spot and streak free drying.The dispenser, which is positioned inside the door, holdsabout 110 ml of rinse aid, which is sufficient for 16 - 40dishwashing programmes, depending upon the dosagesetting. Fil...
Page 5 - Hints and tips
4 To save energy Place dishes in the machine immediately after every meal andwait until the dishwasher is full before washing.If necessary run the Rinse and Hold programme (see"Washing Programmes" chart) so that any food scraps do notbecome caked on the dishes while you are waiting to run th...
Page 6 - Maintenance and cleaning
Internal cleaning Ensure that the seals around the door, the detergent and rinseaid dispensers are cleaned regularly with a damp cloth.We recommend the use of Finish Dishwasher Cleaner every3 months or run a 65°C wash without dishes using detergent.Regular use of Finish Dishwasher Cleaner cleansinac...
Page 7 - Something not working; Symptom
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below. Important: If you call out an engineer to a fault listed below or to repair a...
Page 8 - Electrical connection
Any electrical work required to install this applianceshould be carried out by a qualified electrician orcompetent person.Any plumbing work required to install this applianceshould be carried out by a qualified plumber or competentperson.Remove all packaging before positioning the machine.If possibl...
Page 10 - The control panel; MAINS ON indicator light; Description of the appliance; INSTRUCTION BOOK
2 The control panel 1. MAINS ON indicator light 2. MAINS ON push button 3. Programme guide 4. Door handle 5. Programme marker 6. Programme selector dial 8. Programme sequence indicator As the programme progresses, the programme selector dial turns, to show the phase in the wash programme the applian...
Page 12 - Operating sequence
4 1. Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning"). 2. Check that there is rinse aid and salt 3. Load the dishes Remove any scraps of food. Pull the lower basket out and arrange the saucepans, plates and cutlery in it. Pull the upper basket ...
Page 13 - Using your appliance
5 Loading your appliance Before placing dishes in the machine, remove any scraps offood, to avoid clogging the filters and consequently reducingthe performance. Do not load very small items which can fall through thebaskets. The lower basket The lower basket is designed to take saucepans, lids, plat...
Page 15 - Guarantee Conditions; Standard guarantee conditions; Service and Spare Parts
7 In the event of your appliance requiring service, or if you wish topurchase spare parts please contact your local Service ForceCentre by telephoning: 08705 929 929 Your telephone call will be automatically routed to the ServiceForce centre covering your post code area. For the address of your loca...